[ANN] [CPR] | Copper Bars | Scrypt-Jane | GPU Efficiency JUST DROPPED

[minerapia]

Pool is back up, I removed very short block spread etc, cos those were for testing

Im off for now, if its broken dont mine

Edit, pool looks pretty ok atm, there was alot of stales/doa shares when it started but looks better now.

[reb0rn21]

from 3am to 7am http://cpr.coinmine.pl was down so mine miner switched to solo, from solo i got 1.3cpr, from pool i am getting 1cpr per ~3h so i can confirm pool works OK, also payment if set to 1 cpr works with no problem at all....

new p2pool need a lot more hashs power to take off... block time is still to fast, diff is up but still need to go up a lot to catch the network speed!

BTW: i have ~10Mh/s

[minerapia]

had to restart the pool as it had small bug, At first its stale fest again but it get better after pool gets properly synced with DB etc...
Ill setup a testpool somewhere else and switch it over when Ill get proper settings done and tested.

everytime I chance parameters, I have to delete all old shares (because they arent valid with new settings), and after that pool seems to live in the past for a moment, some of shares it gets are 180s+ old etc... It just takes a lil time for it to recoup, I tried to shorten it abit.

edit: it should be safe now to turn some hashes to the p2pool now.

[minerapia]

cmon, i need some test data lol

If you guys are getting a lot of rejects on the P2Pool, don't forget about this:

stratum+tcp://94.237.84.48:9777
username = yourwallet
password = anything

stats at http://94.237.84.48:9777/static

You can set your share difficulty by adding +0.0000xxxx to your CPR address:

<YourWalletAddress>+0.000xxxx

Recommend share difficulty:

Hash Rate (KHash/s) Difficulty
1 +0.00000116
5 +0.00000582
10 +0.00001164
50 +0.00005821
100 +0.00011641
250 +0.00029103
500 +0.00058207
750 +0.00087310
1000 +0.00116414

[reb0rn21]

@minerapia

Ok i put 3.6Mh, but i had to use +0.1 its starts fine and then 50%+ rejects

[minerapia]

I see the "vardiff" not working or so your shares has target of minimum or so, ill try to raise minimum not abit to see if it settles

[minerapia]

can you try something like +0.00116414 ?

[reb0rn21]

can you try something like +0.00116414 ?

here it goes.. nothing

it say now pool dead

and now rejects only

[minerapia]

it shows same target for the all shares, and theyre submitted faster than the node can digest em...

[iGotSpots]

I can't connect to the pool. Tried http and stratum+tcp

[reb0rn21]

it shows same target for the all shares, and theyre submitted faster than the node can digest em...

Duno i know if i try solo while the 200Mh pool is online, i will get 70% orphans...

[minerapia]

just a sec im restarting everything,
i prolly broke something badly i guess.
Ill re-clone the whole repo and do just the minimum changes to make it work.

ok, new pool is up at port 9778
looks like sh*t.... I just dont get it
Ill go walk the dog, smoke cig and think abit. then when I come back if it still looks like that Ill reboot whole thing.

and i took it down again for some tests...

[iGotSpots]

Its a fast coin but once you can keep up it will find a shitload

[iGotSpots]

Even with all the rejects I was still getting like hundreds of shares a minute accepted

[iGotSpots]

I'm getting like 900 shares a minute per card right now with like 5% rejects lol

[Entz]

I'm getting like 900 shares a minute per card right now with like 5% rejects lol

That is encouraging at least. So does this mean the pool is stable now?

[iGotSpots]

I'm getting like 900 shares a minute per card right now with like 5% rejects lol

That is encouraging at least. So does this mean the pool is stable now?

That's after like 10ish minutes with fresh stats

[minerapia]

I see that stats are waaaaay off etc, but atleast it found a block which genuinly is in wallet, orphaned tho

[iGotSpots]

You should have found a ton of blocks by now but nothin has paid out for a while

[minerapia]

for some reason python (pool runs over it) hitted 100% and some of the blocks went wrong...

block we had so far is basicly split between 2 types:
I guess these went wrong cos of something was bugging python

Code:

ThreadRPCServer method=submitblock
ThreadRPCServer method=getblock
ERROR: AcceptBlock() : block's timestamp is too early
ERROR: ProcessBlock() : AcceptBlock FAILED

and then we had these

Code:

ThreadRPCServer method=submitblock
ProcessBlock: ACCEPTED
ERROR: ProcessBlock() : already have block 144235 00000000d24191b785aa

It took me like 30 minutes to setup a p2pool for regular scrypt coin, this has taken me 2 days and still its not working properly. You desinged one hard coin lol