OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.11.1

[-ck]

Ok, new experiment for the windows+amu fail:
http://ck.kolivas.org/apps/cgminer/temp/cgminer-sw.exe

[mdude77]

Interestingly - and related - I've been doing some reading about usb hubs that don't have separate transaction translators for usb1.1 devices and wonder if all the flakiness isn't just dodgy hubs with a shared TT and all these usb devices being usb1.1. It's rather annoying that usb2 is a decade old and people are still making 1.1 devices because they can use the cheapest nastiest communication chip money can buy in their devices. What USB hub do you have? I don't even know if hubs are still made with single transaction translators any more or not, but it would be interesting to find out.

It's a neat idea ... except I got zombies with the same hardware (same erupters, same hubs) that worked fine on another rig.  I'm down to 1 USB erupter, and it's happily chugging along at 335mh/s on main PC.

M

The PC's own hubs also include transaction translators by the way.

Another thing I thought of ... is there were multiple issues.  I think you fixed the ones affecting me, now I just have the USB 3.0 problem.

M

[CustomDesigned]

Thanks. Next test, 3.8.4 please.

Compiled and ran 3.8.4 on Fedora 19.  It ran for 68 hours, before running out of file descriptors.  At that point, it can no longer replug zombies.  It could probably run indefinitely if those file descriptors could get closed somehow.   Next time, I'll remember to run lsof to see what all those file descriptors are referencing...

 [2013-12-06 22:25:29] SEM: Icarus USB open failed '/tmp/cgminer-usb-1-64' err (24) Too many open files

[-ck]

Thanks. Next test, 3.8.4 please.

Compiled and ran 3.8.4 on Fedora 19.  It ran for 68 hours, before running out of file descriptors.  At that point, it can no longer replug zombies.  It could probably run indefinitely if those file descriptors could get closed somehow.   Next time, I'll remember to run lsof to see what all those file descriptors are referencing...

 [2013-12-06 22:25:29] SEM: Icarus USB open failed '/tmp/cgminer-usb-1-64' err (24) Too many open files

Found how this might happen. Try latest git please.

[aigeezer]

Ok, new experiment for the windows+amu fail:
http://ck.kolivas.org/apps/cgminer/temp/cgminer-sw.exe

My most recent normal 3.8.4 test ran about 12 hours without incident - no zombies at all. I've just run the "sw" test and it has one zombie after about an hour, AMU5.

Edit: another zombie with the "sw" test, about 5 hours into the run. Curiously, this one was also reported as AMU5 although it wasn't the same physical device as above. Unplugging it did not change its status to AMU0, unlike many of the earlier versions. On replug it was reallocated to AMU14 and the numbering overall suggests it had actually been AMU7 that went zombie this time. Present numbering is AMU0-4, 6, 8-14 so I think the first zombie, AMU5, was reallocated to AMU13 on replug. The "sw" run continues.

I found an Amazon (Canada) listing for the hubs I'm using, fwiw: http://www.amazon.ca/gp/product/B009Z9M3DY

I just noticed this phrase in the blurb for them "Smart chip power management allows devices to communicate idle states and latency tolerance for progressively lower power states and subsequently increased performance and power efficiency". Don't know if it's relevant.

[jmc1517]

Ok, new experiment for the windows+amu fail:
http://ck.kolivas.org/apps/cgminer/temp/cgminer-sw.exe

My most recent normal 3.8.4 test ran about 12 hours without incident - no zombies at all. I've just run the "sw" test and it has one zombie after about an hour, AMU5.

Edit: another zombie with the "sw" test, about 5 hours into the run. Curiously, this one was also reported as AMU5 although it wasn't the same physical device as above. Unplugging it did not change its status to AMU0, unlike many of the earlier versions. On replug it was reallocated to AMU14 and the numbering overall suggests it had actually been AMU7 that went zombie this time. Present numbering is AMU0-4, 6, 8-14 so I think the first zombie, AMU5, was reallocated to AMU13 on replug. The "sw" run continues.

I found an Amazon (Canada) listing for the hubs I'm using, fwiw: http://www.amazon.ca/gp/product/B009Z9M3DY

I just noticed this phrase in the blurb for them "Smart chip power management allows devices to communicate idle states and latency tolerance for progressively lower power states and subsequently increased performance and power efficiency". Don't know if it's relevant.

I am running 3 10-port Anker hubs and an old 4-port hub, all individually powered and plugged directly into the PC.  No daisy-chaining. Interestingly I don't remember ever seeing one of the 4-port devices going zombie...

So... On an initial test of "sw" without logging, I noticed some LEDs come on for several seconds then go out, and mining continued OK.  Another time a zombie was reported but it re-plugged automatically. Then several zombies came up which did not re-plug automatically and I noticed "icarus detect - incorrect device" warnings.  I don't know if these are new with this build or not, but when they came up I did examine the whole table in Zadig to check if AMUs had been re-assigned to slots with incorrect driver software - but they all looked OK.

Powered the hubs off/on to reset everything as usual.
 
On this run (with logging), a zombie (AMU 22) appeared after about a minute, which did not re-plug automatically.  Manual re-plugging worked OK, but I stopped the test because I was going out and wanted to be sure
the miner would keep running.  It seems that this version tries hard to keep things going, but I seem to be seeing more initial disturbances (LEDs on for a second or more then disappearing, then maybe a zombie which replugs automatically etc.)  I don't see any of that with 3.5.1, and as I'm normally sitting right next to the Erupters working away at the PC, any unusual flashing immediately catches the eye.

Logfile here, for what it's worth:
  https://dl.dropboxusercontent.com/u/44240170/logfile-sw.txt

[os2sam]

I am running 3 10-port Anker hubs and an old 4-port hub, all individually powered and plugged directly into the PC.  No daisy-chaining. Interestingly I don't remember ever seeing one of the 4-port devices going zombie...

I had to plug my 9+1 Anker's into my 5/7 port Rosewill hubs to get them to work reliably.

[-ck]

I am running 3 10-port Anker hubs and an old 4-port hub, all individually powered and plugged directly into the PC.  No daisy-chaining. Interestingly I don't remember ever seeing one of the 4-port devices going zombie...

Try plugging the 3 10 port ankers into the 4 port device just for grins?

[Zhukov0]

Hi people, i've got a little problem. I want to mine in some places where putting no password is required... but i can't use CGMINER without a password. I can't execute without the -p parameter, i can't use -p xxx for example (it doesn't connect to pool or doesn't get any share), and also i can't use --username=user:

Somebody know how can i do it??? I tried lot of versions of CGMINER, including the last one compatible with GPU mining (3.7.2)

Thanks!

[-ck]

Hi people, i've got a little problem. I want to mine in some places where putting no password is required... but i can't use CGMINER without a password. I can't execute without the -p parameter, i can't use -p xxx for example (it doesn't connect to pool or doesn't get any share), and also i can't use --username=user:

Somebody know how can i do it??? I tried lot of versions of CGMINER, including the last one compatible with GPU mining (3.7.2)

Connecting via stratum, getwork or GBT ALWAYS takes a password, even if it is ignored, so your pool is broken.

[Zhukov0]

Hi people, i've got a little problem. I want to mine in some places where putting no password is required... but i can't use CGMINER without a password. I can't execute without the -p parameter, i can't use -p xxx for example (it doesn't connect to pool or doesn't get any share), and also i can't use --username=user:

Somebody know how can i do it??? I tried lot of versions of CGMINER, including the last one compatible with GPU mining (3.7.2)

Connecting via stratum, getwork or GBT ALWAYS takes a password, even if it is ignored, so your pool is broken.

It's weird, because i was trying to use P2Pool and Bitparking... P2Pool was working some time ago with any kind of password, but now some pools of p2pool doesn't work if i put some kind of password.

[cxboyminer]

Ckolivas,

I just made a video on cgminer for mac installation tutorial... hope that helps...

Progress: DONE

http://youtu.be/FWd03bqfURg

[aigeezer]

  It seems that this version tries hard to keep things going, but I seem to be seeing more initial disturbances (LEDs on for a second or more then disappearing, then maybe a zombie which replugs automatically etc.) 

I got a cluster of four (almost) simultaneous zombies and was going to make a routine post agreeing with your observation about clusters of LEDs on, when things got weird for me. On a lazy whim, I tried Q and restarting cgminer hoping it might cure all four zombies at once. It didn't, so I unplugged and replugged the hubs and everything seemed back to normal. The cgminer display showed all units hashing normally and the AMU LEDs and BAL fan all seemed normal. I looked at my stats on Slush's pool and was startled to see the "last share at" timer creeping upward. No work from this 'puter was registering at the pool. The cgminer display showed the pool connection normally. I looked at a few other things and waited to see if it would recover but it did not. After 14 minutes I quit and restarted cgminer and the counter at the pool site recovered immediately. I've never seen that happen before, but it looks like a potentially serious effect from something or other I did in a too-casual zombie recovery/restart.

[-ck]

  It seems that this version tries hard to keep things going, but I seem to be seeing more initial disturbances (LEDs on for a second or more then disappearing, then maybe a zombie which replugs automatically etc.) 

I got a cluster of four (almost) simultaneous zombies and was going to make a routine post agreeing with your observation about clusters of LEDs on, when things got weird for me. On a lazy whim, I tried Q and restarting cgminer hoping it might cure all four zombies at once. It didn't, so I unplugged and replugged the hubs and everything seemed back to normal. The cgminer display showed all units hashing normally and the AMU LEDs and BAL fan all seemed normal. I looked at my stats on Slush's pool and was startled to see the "last share at" timer creeping upward. No work from this 'puter was registering at the pool. The cgminer display showed the pool connection normally. I looked at a few other things and waited to see if it would recover but it did not. After 14 minutes I quit and restarted cgminer and the counter at the pool site recovered immediately. I've never seen that happen before, but it looks like a potentially serious effect from something or other I did in a too-casual zombie recovery/restart.

I suspect it's actually managing to crash the hub itself and the hub needs resetting. Ugly.

[-ck]

Here is a sequence of exes to try please. It will emulate a transaction translator for usb1.1 devices.

http://ck.kolivas.org/apps/cgminer/temp/cgminer-w1d10.exe
http://ck.kolivas.org/apps/cgminer/temp/cgminer-w2d10.exe

http://ck.kolivas.org/apps/cgminer/temp/cgminer-rw1d10.exe
http://ck.kolivas.org/apps/cgminer/temp/cgminer-rw2d10.exe

http://ck.kolivas.org/apps/cgminer/temp/cgminer-w10d10.exe
http://ck.kolivas.org/apps/cgminer/temp/cgminer-rw10d10.exe

If any of these prove to work, there is no need to test the ones further down, thanks!

[-ck]

Ckolivas,

I just made a video on cgminer for mac installation tutorial... hope that helps...

Progress: DONE

http://youtu.be/FWd03bqfURg

Much appreciated, thanks!

[cxboyminer]

Ckolivas,

I just made a video on cgminer for mac installation tutorial... hope that helps...

Progress: DONE

http://youtu.be/FWd03bqfURg

Much appreciated, thanks!

Hope that will help new people transferring from bfgminer to cgminer

[erk]

Ckolivas,

I just made a video on cgminer for mac installation tutorial... hope that helps...

Progress: DONE

http://youtu.be/FWd03bqfURg

Much appreciated, thanks!

Hope that will help new people transferring from bfgminer to cgminer

seeing cgminer no longer supports scrypt mining the transfers are probably in the other direction, as scrypt is very popular again with the rise in alt coin prices. That said I still prefer using cgminer.

[-ck]

Hope that will help new people transferring from bfgminer to cgminer

seeing cgminer no longer supports scrypt mining the transfers are probably in the other direction, as scrypt is very popular again with the rise in alt coin prices. That said I still prefer using cgminer.

That's really quite funny and hypocritical given luke-Jr considers all altcoins scams yet he pulled my scrypt code and is now maintaining the only maintained scrypt GPU miner on these forums.

[aigeezer]

Here is a sequence of exes to try please. It will emulate a transaction translator for usb1.1 devices.

http://ck.kolivas.org/apps/cgminer/temp/cgminer-w1d10.exe
http://ck.kolivas.org/apps/cgminer/temp/cgminer-w2d10.exe

http://ck.kolivas.org/apps/cgminer/temp/cgminer-rw1d10.exe
http://ck.kolivas.org/apps/cgminer/temp/cgminer-rw2d10.exe

http://ck.kolivas.org/apps/cgminer/temp/cgminer-w10d10.exe
http://ck.kolivas.org/apps/cgminer/temp/cgminer-rw10d10.exe

If any of these prove to work, there is no need to test the ones further down, thanks!

The first one (w1d10) got one zombie during an unattended 12-hour run. It replugged with no problem. I'll try w2d10 now.