[ANN] [Rt2] ·rotoCoin·Now on Cryptsy!!Bet with your RotoS ·Android trader APP·

[luiggybit]

I believe on this coin... will be listed on mintpal or cryptsy soon?

[Viecoin]

I like the low number of coins.

[MeGaDoOm]

WTS ! WTS ! WTS ! WTS ! WTS ! WTS ! WTS ! WTS ! WTS ! WTS ! WTS ! WTS ! WTS ! WTS ! WTS ! WTS ! WTS ! WTS ! FTW !                           

[MeGaDoOm]

now for something cmpletely offtopic...
    i hope this coin will do like 42 coin...

[MeGaDoOm]

I believe on this coin... will be listed on mintpal or cryptsy soon?

I noticed that when a coin gets on Cryptsy lately it´s dead.                                                               
don´t know why. i heard something about a market maker deermining coin value. but i think it´s more supply and demand.
anyways, i´ve had it with Cryptsy...

[phaed]

I say put a bit of the IPO btc to get on MintPal, then serious trading will happen.

[luiggybit]

mintpal is also a great exchange!!!!

[richiela]

I believe on this coin... will be listed on mintpal or cryptsy soon?

https://www.bittrex.com/Market/Index?MarketName=BTC-RT2

Listed at bittrex already!

[eddaviking]

Hey, i send 0,1 coins to rotocoin wheel and don't recibed nothing , please contatc to the dev , thx in advice

Thanks for reporting this, I'm going to contact the developer of the wheel!

I'll keep you posted.

Cheers

Yes.  Same here.  Appreciate the update. Thanks.

[Quantum12]

i have also sent roto to rotowheel and nothing is showing up

[chiznitz]

https://www.bittrex.com/Market/?MarketName=BTC-RT2 RT2  ON BITTREX - FIRST NORMAL EXCHANGE FOR RT2

I like the guys at bittrex but claiming they are first normal exchange?  I think they are a great exchange but there's nothing not normal about mine either


www.cryptoaltex.com

[richiela]

https://www.bittrex.com/Market/?MarketName=BTC-RT2 RT2  ON BITTREX - FIRST NORMAL EXCHANGE FOR RT2

I like the guys at bittrex but claiming they are first normal exchange?  I think they are a great exchange but there's nothing not normal about mine either


www.cryptoaltex.com

+1 ... I'd send my coins to cryptoaltex before i'd send it to ones that have had known security and lost funds issues...

[pmm123]

roto coin to da mon WTS 3 coins for 0,25 btc

[binaryclock]

GENTLEMEN.  This has been asked a few times so I'm going to say it again.  For European ROTO mining, the we have an AMSTERDAM stratum up at http://ROTO.DEDICATEDPOOL.COM

It is :

stratum+tcp://amsterdam.eu.stratum.dedicatedpool.com:3379

http://roto.dedicatedpool.com
Ryan, dedicatedpool.com support/admin
[email protected] / IRC on freenode ##dedicatedpool

[squirtoneske]

I need some help, I was able to setup 2 of my hashing machines yesterday easily enough but I am unable to configure vertminer correctly to utilise both my 6870's. Vertminer loads as if it is going to work, it appears ok, but I am unable to hit a hash rate above 12 on either card. I have set this up using vertminer for a single ati card and using cuda miner for a single ndivia card.

here are my batch file settings. please help, is there something else i should be changing?

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
COLOR 0A
vertminer.exe --scrypt-vert -o stratum+tcp://rt2-stratum.hashfever.com:3274 -u drsquirt.1 -p 1234 --intensity 15 --gpu-engine 1000 --gpu-memclock 900 --gpu-fan 100 --thread-concurrency 4720 -d 0,1 -w 256

[ticoti]

I need some help, I was able to setup 2 of my hashing machines yesterday easily enough but I am unable to configure vertminer correctly to utilise both my 6870's. Vertminer loads as if it is going to work, it appears ok, but I am unable to hit a hash rate above 12 on either card. I have set this up using vertminer for a single ati card and using cuda miner for a single ndivia card.

here are my batch file settings. please help, is there something else i should be changing?

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
COLOR 0A
vertminer.exe --scrypt-vert -o stratum+tcp://rt2-stratum.hashfever.com:3274 -u drsquirt.1 -p 1234 --intensity 15 --gpu-engine 1000 --gpu-memclock 900 --gpu-fan 100 --thread-concurrency 4720 -d 0,1 -w 256

go here and check the conf for your graphics

http://www.verters.com/vertcoin-hardware-list

[franckuestein]

I need some help, I was able to setup 2 of my hashing machines yesterday easily enough but I am unable to configure vertminer correctly to utilise both my 6870's. Vertminer loads as if it is going to work, it appears ok, but I am unable to hit a hash rate above 12 on either card. I have set this up using vertminer for a single ati card and using cuda miner for a single ndivia card.

here are my batch file settings. please help, is there something else i should be changing?

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
COLOR 0A
vertminer.exe --scrypt-vert -o stratum+tcp://rt2-stratum.hashfever.com:3274 -u drsquirt.1 -p 1234 --intensity 15 --gpu-engine 1000 --gpu-memclock 900 --gpu-fan 100 --thread-concurrency 4720 -d 0,1 -w 256

Hi!
Try with this config:
"auto-fan" : true, "gpu-fan" : "40-100", "temp-cutoff" : "75,75", "temp-overheat" : "70", "temp-target" : "64", "intensity" : "17", "worksize" : "256", "lookup-gap" : "2", "gpu-engine" : "1000" "gpu-memclock" : "800", "thread-concurrency" : "4720", "shaders" : "0", "gpu-threads" : "1", "expiry" : "30", "scan-time" : "5" }

You're going to be able to have ~160kHs

[robertson2013]

People on Bittrex have the right idea with the price of the coin, just wish Swisscex sellers would do the same and edit their selling price.

[squirtoneske]

I need some help, I was able to setup 2 of my hashing machines yesterday easily enough but I am unable to configure vertminer correctly to utilise both my 6870's. Vertminer loads as if it is going to work, it appears ok, but I am unable to hit a hash rate above 12 on either card. I have set this up using vertminer for a single ati card and using cuda miner for a single ndivia card.

here are my batch file settings. please help, is there something else i should be changing?

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
COLOR 0A
vertminer.exe --scrypt-vert -o stratum+tcp://rt2-stratum.hashfever.com:3274 -u drsquirt.1 -p 1234 --intensity 15 --gpu-engine 1000 --gpu-memclock 900 --gpu-fan 100 --thread-concurrency 4720 -d 0,1 -w 256

Hi!
Try with this config:
"auto-fan" : true, "gpu-fan" : "40-100", "temp-cutoff" : "75,75", "temp-overheat" : "70", "temp-target" : "64", "intensity" : "17", "worksize" : "256", "lookup-gap" : "2", "gpu-engine" : "1000" "gpu-memclock" : "800", "thread-concurrency" : "4720", "shaders" : "0", "gpu-threads" : "1", "expiry" : "30", "scan-time" : "5" }

You're going to be able to have ~160kHs

thank you so much for the reply. do those settings that you have provided go directly into my batch file or do I have to create config file in the same directory as the batch file? what is the name of the config file and location?

[robertson2013]

I need some help, I was able to setup 2 of my hashing machines yesterday easily enough but I am unable to configure vertminer correctly to utilise both my 6870's. Vertminer loads as if it is going to work, it appears ok, but I am unable to hit a hash rate above 12 on either card. I have set this up using vertminer for a single ati card and using cuda miner for a single ndivia card.

here are my batch file settings. please help, is there something else i should be changing?

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
COLOR 0A
vertminer.exe --scrypt-vert -o stratum+tcp://rt2-stratum.hashfever.com:3274 -u drsquirt.1 -p 1234 --intensity 15 --gpu-engine 1000 --gpu-memclock 900 --gpu-fan 100 --thread-concurrency 4720 -d 0,1 -w 256

Hi!
Try with this config:
"auto-fan" : true, "gpu-fan" : "40-100", "temp-cutoff" : "75,75", "temp-overheat" : "70", "temp-target" : "64", "intensity" : "17", "worksize" : "256", "lookup-gap" : "2", "gpu-engine" : "1000" "gpu-memclock" : "800", "thread-concurrency" : "4720", "shaders" : "0", "gpu-threads" : "1", "expiry" : "30", "scan-time" : "5" }

You're going to be able to have ~160kHs

thank you so much for the reply. do those settings that you have provided go directly into my batch file or do I have to create config file in the same directory as the batch file? what is the name of the config file and location?

What cards are you using?