[ANN] [XMG] MAGI | CPU mining | mPoW | mPoS | [MagiPay]

[Vitalik_Pedik]

To stand on proper chain you must (check here http://m-chain.info/chain/magi and https://poolinfo.systms.org/ and https://chainz.cryptoid.info/xmg/)
1. Delete your chain (folders blocks and database), delete peers.dat file
2. Download current proper chain from official site https://m-core.org/bin/block-chain/m-block-chain-1813042.zip
3. Unpack it to magi folder and run wallet

It will work without pointing right nodes, wallet will found them automaticaly (you can use "addnode=104.128.225.215" from dev as starting node)

[DOGEbubble]

Till xpoolx will not connect to proper chain, big rewards for block will stay.

The problem is far from being over. 

@Cryptopia has about 40,000 XMG. The site Admin has not been waking up yet. If indeed the site is on a different blockchain, you know what is going to happen.      Please do not blame blockchain issues on the exchange site- it is all XMG's fault. And please do not send death-threat like the RaiBlocks guys did if this should happen. https://medium.com/@ainsleyh/raiblocks-is-objectively-the-best-pure-cryptocurrency-but-its-users-are-rather-panic-prone-bfa7597750c3

[The Doktor]

Till xpoolx will not connect to proper chain, big rewards for block will stay.

The problem is far from being over. 

@Cryptopia has about 40,000 XMG. The site Admin has not been waking up yet. If indeed the site is on a different blockchain, you know what is going to happen.      Please do not blame blockchain issues on the exchange site- it is all XMG's fault. And please do not send death-threat like the RaiBlocks guys did if this should happen. https://medium.com/@ainsleyh/raiblocks-is-objectively-the-best-pure-cryptocurrency-but-its-users-are-rather-panic-prone-bfa7597750c3

But how many of those 40,000 XMG were deposited after the split? I'm guessing very few.

[DOGEbubble]

Till xpoolx will not connect to proper chain, big rewards for block will stay.

The problem is far from being over.  

@Cryptopia has about 40,000 XMG. The site Admin has not been waking up yet. If indeed the site is on a different blockchain, you know what is going to happen.      Please do not blame blockchain issues on the exchange site- it is all XMG's fault. And please do not send death-threat like the RaiBlocks guys did if this should happen. https://medium.com/@ainsleyh/raiblocks-is-objectively-the-best-pure-cryptocurrency-but-its-users-are-rather-panic-prone-bfa7597750c3

But how many of those 40,000 XMG were deposited after the split? I'm guessing very few.

Thank God. @Cryptopia the blockchain is @1812638 now.
Although, it only shows one connection (of their own)?  LOL.  

[jonathin.r]

Since I refuse to upload any blockchain snapshots until this blockchain issue gets smoothed out, I figured I might as well try to help in other way.

I've created a BASH script for Linux Miners that allows you to quickly and easily switch between pools. It can be also be configured to allow for different configurations of the same pool (less threads, more efficiency, etc.).

You can check it out at https://pastebin.com/824VSdYi

[Cooper54]

All night at work I have been getting emails from Trasmamod on deposits being sent from my mining. However, when I get home, maybe a third of those deposits are in my wallet. I fully understand if this is because of the split. If it is not and those coins should be in my account, what would I do to locate them or whatnot?

[Cooper54]

Since I refuse to upload any blockchain snapshots until this blockchain issue gets smoothed out, I figured I might as well try to help in other way.

I've created a BASH script for Linux Miners that allows you to quickly and easily switch between pools. It can be also be configured to allow for different configurations of the same pool (less threads, more efficiency, etc.).

You can check it out at https://pastebin.com/824VSdYi

Is it bad to say that I could hug you? LOL. I am switching every now and then between pools so this is awesome. Right now I have just built the line into a text file and then select the line I want for what pool I was going to go and just drag it into terminal.

[joelao95]

Blockchain snapshot as follows:

https://m-core.org/bin/block-chain/m-block-chain-1813042.zip
https://m-core.org/bin/block-chain/m-block-chain-1813042.tar.gz

[joelao95]

For test only (don't run for regular use):

The following are for testing solutions to the current issue; for one who wants to help out, here are the steps:

Source: https://github.com/magi-project/magi/tree/1.4.6-test-1

# Download blockchain and unzip into the right place:
https://m-core.org/bin/block-chain/m-block-chain-1813042.zip
https://m-core.org/bin/block-chain/m-block-chain-1813042.tar.gz

# Download binaries (windows, linux and osx):
https://m-core.org/bin/m-wallet-1.4.6.1-test/m-wallet-1.4.6.1-test.zip

# Setup magi.conf:

Code:

rpcuser=magirpc
rpcpassword=magipass
daemon=1
server=1
listen=1
rpcallowip=127.0.0.1
posii=1

addnode=159.203.71.237
addnode=138.197.70.198

# Launch the wallet

We'll monitor progress; pls help mining on test chain, particularly PoS staking.

[Jeremy450]

solo mining sucks. 12hrs of nothingness.

[joelao95]

Blockchain splits on PoS and it has been related to the recent issue. We've sent out requests to put wallet into maintenance mode few days ago; Bittrex did so which made them be not affected.

I'll be uploading blockchain data, or people can connect to 104.128.225.215, and will post test regarding the current issue.

We do be aware of the situation, and try as much as possible to bring back normal operation, and fix the PoS issue.

Thanks for the update Joe, anything we can do to help?

Thanks; we'll need more people run test wallet as mentioned above.

[WaifusAreLove]

If you create a MacOS version, I don't mind helping too!

[joelao95]

If you create a MacOS version, I don't mind helping too!

The link now contains osx version:
https://m-core.org/bin/m-wallet-1.4.6.1-test/m-wallet-1.4.6.1-test.zip

[Vitalik_Pedik]

https://chainz.cryptoid.info/xmg/ on proper chain now.

[jonathin.r]

I wish my wallet had enough Magicoin to actually stake. I just got done running v1.4.6.1-test for 30 minutes with an empty wallet, and I just started the client again with my actual wallet which I will run for 30 minutes as well. I'll be posting debug logs to PasteBin for Joe and any curious people.

Edit:
MagiCoin 1.4.6.1-test: 30-Minute Test #1 with empty test wallet: https://pastebin.com/8j12Zekf
MagiCoin 1.4.6.1-test: 30-Minute Test #2 with actual wallet: https://pastebin.com/kyTpWVJk

[Vitalik_Pedik]

In past 24h all POW miners earned about 9k XMG, but they will not stop cry about low profit, I know this classic)
And jonathin.r still try to find best anal dildo for himself.

[jonathin.r]

In past 24h all POW miners earned about 9k XMG, but they will not stop cry about low profit, I know this classic)
And jonathin.r still try to find best anal dildo for himself.

Oh hun, you have no clue.

[Jeremy450]

In past 24h all POW miners earned about 9k XMG, but they will not stop cry about low profit, I know this classic)

I'm sorry, who asked you?

you still doing solo mining or was i thinking of someone else?

[Jeremy450]

Either MinerClaim is stuffing up or something happening with the network

seeing unknown username for blocks found and the XMG Est. Earnings is 0.00000000

[jonathin.r]

you still doing solo mining or was i thinking of someone else?

I was trying to get solo mining setup last night, but I gave up shortly before going to bed.

Either MinerClaim is stuffing up or something happening with the network

seeing unknown username for blocks found and the XMG Est. Earnings is 0.00000000

Looks like port 3333 is having issues again.

jonathin@localhost:~$ bash Minerclaim.sh
[2018-05-05 23:42:23] Binding thread 0 to cpu 0
[2018-05-05 23:42:23] Binding thread 3 to cpu 3
[2018-05-05 23:42:23] 4 miner threads started, using 'm7mhash' algorithm.
[2018-05-05 23:42:23] Binding thread 2 to cpu 2
[2018-05-05 23:42:23] Starting Stratum on stratum+tcp://xmg.minerclaim.net:3333
[2018-05-05 23:42:23] Binding thread 1 to cpu 1
[2018-05-05 23:42:53] Stratum connection failed: Connection timed out after 30001 milliseconds
[2018-05-05 23:42:53] ...retry after 30 seconds
[2018-05-05 23:43:36] stratum_recv_line failed
[2018-05-05 23:43:36] ...retry after 30 seconds
[2018-05-05 23:44:36] Stratum connection failed: Connection timed out after 30001 milliseconds
[2018-05-05 23:44:36] ...retry after 30 seconds