[ANN][AMS] AmsterdamCoin™ | 100% PoS, Cold-Staking, Side-Chains, Smart-Contracts

[qinotorez]

i am trying to mine some on nicehash, but i cant find xevan, is it not rented out over there?!

[greenhope]

Where all CryptoHub miners gone   

I came back on.
I'm giving some break to my card.lol
Btw, am I the only one rihgt now?

[Elder III]

i am trying to mine some on nicehash, but i cant find xevan, is it not rented out over there?!

I don't think xevan has ever been supported on Nicehash. Perhaps it will be added some day since there are more Xevan coins now, whereas for awhile it was BitSend only using that algorithm (they created it in the first place).

[Blockmunch]

BlockMunch.CLUB has added AmsterdamCoin to it's Multi-Pool!  Only 0.25% Fee's!
0% FEE'S NOW UNTIL 11/14/17 OR UNTIL WE REACH 50 MINERS WHICHEVER COMES LAST!!
We are now a Multi-Pool!  We mine the most profitable coin always, and maximize your return!

Choose your payout style.  We pay out in this coin, BTC, and any coin we currently have listed on the pool!

Example Config is Below for AmsterdamCoin Pay:

Code:

-a xevan -o stratum+tcp://blockmunch.club:3739 -u AVdVEdpUV5f1dL9NxhLpeNXKEh99ZByAV5 -p c=AMS 

Example Config Below for BTC Pay

Code:

-a xevan -o stratum+tcp://blockmunch.club:3739 -u 1JFx3fE462vMsTeYkNK5yvdWeg2wpmxvBD -p c=BTC 

Block Explorer Link:

Code:

blockmunch.club/explorer/AMS

Peer List:

Code:

blockmunch.club/site/peers?id=1294

Welcome to the Block Munch Club!

[startsts]

Where all CryptoHub miners gone    

I came back on.
I'm giving some break to my card.lol
Btw, am I the only one rihgt now?

Have you tried withdrawal at cryptoHub?   Maybe wallet at wrong chain... could you check please?
Wallet on cryptohub has same height as block explorer, so should be ok.

[greenhope]

Where all CryptoHub miners gone    

I came back on.
I'm giving some break to my card.lol
Btw, am I the only one rihgt now?

Have you tried withdrawal at cryptoHub?   Maybe wallet at wrong chain... could you check please?
Wallet on cryptohub has same height as block explorer, so should be ok.

I received it fast without problem as usual.

[olegoleg117]

dev
probably forked network

Info for dev - we got two different chains of the AMS network on two servers, difference near 4k block (126k and 130k).

I have seen this a few times and I am thinking about a solution. After a restart of the wallet it will follow the longest chain. Maybe some checkpoints will help staighten it out.

AMS on yobit is on maintenance last 3 days or even more

There is a ticket open for some time now. The wallet is in maintenance for even longer than 3 days. It is very hard to reach someone at Yobit. I will keep trying.

Which one is the right chain?

The longest chain 130k+

Wallet does not sync for two days
last block 126042
How do I synchronize my wallet in the correct chain?

[Mrrr]

I had similar issues. For the VPS: Starting the daemon with -reindex didn't do anything but with

Code:

cd .amsterdamcoin

then

Code:

rm -rf blocks

and

Code:

rm -rf chainstate

it synced after restarting the client.

For the (windows) wallet the equivalent would be deleting the blocks and chainstate folder in \users\username\appdate\roaming\amsterdamcoin and restarting the wallet.

[greenhope]

dev
probably forked network

Info for dev - we got two different chains of the AMS network on two servers, difference near 4k block (126k and 130k).

I have seen this a few times and I am thinking about a solution. After a restart of the wallet it will follow the longest chain. Maybe some checkpoints will help staighten it out.

AMS on yobit is on maintenance last 3 days or even more

There is a ticket open for some time now. The wallet is in maintenance for even longer than 3 days. It is very hard to reach someone at Yobit. I will keep trying.

Which one is the right chain?

The longest chain 130k+

Wallet does not sync for two days
last block 126042
How do I synchronize my wallet in the correct chain?

Rename your data folder, Amsterdamcoin, then reinstall the wallet.
Wait until fully sync'ed, then copy over wallet.dat(and masternode.conf / amsterdamcoin.conf if you're running a masternode) from the renamed data folder.

[Mrrr]

dev
probably forked network

Info for dev - we got two different chains of the AMS network on two servers, difference near 4k block (126k and 130k).

I have seen this a few times and I am thinking about a solution. After a restart of the wallet it will follow the longest chain. Maybe some checkpoints will help staighten it out.

AMS on yobit is on maintenance last 3 days or even more

There is a ticket open for some time now. The wallet is in maintenance for even longer than 3 days. It is very hard to reach someone at Yobit. I will keep trying.

Which one is the right chain?

The longest chain 130k+

Wallet does not sync for two days
last block 126042
How do I synchronize my wallet in the correct chain?

Rename your data folder, Amsterdamcoin, then reinstall the wallet.
Wait until fully sync'ed, then copy over wallet.dat(and masternode.conf / amsterdamcoin.conf if you're running a masternode) from the renamed data folder.

Its indeed always better to back up the whole folder first in case you accidentally delete the wrong thing. No need to reinstall the wallet though. The wallet checks if there is a data folder every time you start it and if there isn't one the wallet will make it. So if you move or rename /appdata/roaming/amsterdamcoin the wallet will just make a new one. You can then put you wallet.dat and .conf files back (overwriting the existing ones)

[olegoleg117]

dev
probably forked network

Info for dev - we got two different chains of the AMS network on two servers, difference near 4k block (126k and 130k).

I have seen this a few times and I am thinking about a solution. After a restart of the wallet it will follow the longest chain. Maybe some checkpoints will help staighten it out.

AMS on yobit is on maintenance last 3 days or even more

There is a ticket open for some time now. The wallet is in maintenance for even longer than 3 days. It is very hard to reach someone at Yobit. I will keep trying.

Which one is the right chain?

The longest chain 130k+

Wallet does not sync for two days
last block 126042
How do I synchronize my wallet in the correct chain?

Rename your data folder, Amsterdamcoin, then reinstall the wallet.
Wait until fully sync'ed, then copy over wallet.dat(and masternode.conf / amsterdamcoin.conf if you're running a masternode) from the renamed data folder.

Its indeed always better to back up the whole folder first in case you accidentally delete the wrong thing. No need to reinstall the wallet though. The wallet checks if there is a data folder every time you start it and if there isn't one the wallet will make it. So if you move or rename /appdata/roaming/amsterdamcoin the wallet will just make a new one. You can then put you wallet.dat and .conf files back (overwriting the existing ones)

Thanks, it helped to synchronize only full deletion of the folder with saving the wallet file and config files.
It seems to be a universal method
All -rescan and -reindex did not help 

Maybe this way to advise and Yobit, and then they have already the third week of their wallet can not be synchronized and taken out of maintenance

[loutchano]

Mineblocks low fees fast payments  

New Pool Amsterdamcoin 0.5% Fees  



http://mineblocks.co.uk/getting_started

Configure Your Miners

stratum+tcp://stratum.mineblocks.co.uk:3035 -u YOUR WALLET -p x

Ports ( 3035 )  ( 3036 Nicehash )  All ports Vardiff


Twitter : https://twitter.com/MineBlocksPool

Telegram : https://t.me/mineblocksp

Happy Mining

[Enemyofgods]

is this coin still minable? also... any news on Yobit wallet sync? cant start my MN without my coins?

[uffi]

how to stake ams? Someone can drive me?
thx

[Mrrr]

how to stake ams? Someone can drive me?
thx

POS (staking) won't start until block 259201. We are at block 135676.

Regarding Yobit: keep spamming them with support tickets until they fix their stuff I suppose. I really wonder why people still do business there.

[kaltun]

how to stake ams? Someone can drive me?
thx

POS (staking) won't start until block 259201. We are at block 135676.

Regarding Yobit: keep spamming them with support tickets until they fix their stuff I suppose. I really wonder why people still do business there.

which exchange is good according to you ??  looking for an nice decent exchanges....  

i am starting to  like mercatox   also

[cryptophil]

how to stake ams? Someone can drive me?
thx

PoS: starting from block 259201 we are still at 130000s or so ... almost there another 100 days or so... in the mean time fill her up and backups

[cryptophil]

Just install wallet on another machine actually had one on standby with wallet almost sync :-D so just copied wallet and conf files and check ready to go! So always have a second machine ready so you dont loose to much time. I am a staker so was not to serious as not staking yet, but what if is was ...

[Mrrr]

how to stake ams? Someone can drive me?
thx

POS (staking) won't start until block 259201. We are at block 135676.

Regarding Yobit: keep spamming them with support tickets until they fix their stuff I suppose. I really wonder why people still do business there.

which exchange is good according to you ??  looking for an nice decent exchanges.... 

i begin to  like mercatox   also

For alts I mainly use cryptopia/bittrex. I've no experience with Mercatox but it can't possibly be worse than YoBit. I think a lot of people still fall for Yobit because a lot of coins sell some % below market average. This is because everything gets lost and stuck all the time.

[gothikghk]

I'm trying to setup a Masternode on windows 7 64bit pc with Amsterdamcoin core client version v4.1.0.0-9e92d09. But I'm getting error as

Code:

masternode start

Not capable masternode: Could not connect to xxx.xxx.xx.xxx:50020

I sent 100000 to MN1 address in my wallet. and edited amsterdamcoin.conf with the following details

Code:

rpcuser=username
rpcpassword=password
listen=1
port=50020
masternode=1
masternodeprivkey=87bizxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxbA5KhZ

Restarted wallet and and tried the above command it is not working

masternode status giving me the below msg

Code:

{
    "vin" : "CTxIn(COutPoint(0000000000000000000000000000000000000000000000000000000000000000, 4294967295), coinbase )",
    "service" : "xxx.xxx.xx.xxx:50020",
    "status" : "Not capable masternode: Could not connect to xxx.xxx.xx.xxx:50020"
}

I replace my original IP (dedicated IP btw I have couple of websites on this ip so the ip is visible to outside as well as inside) with xxx.xxx.xx.xxx. I test the port is open or not wth "port query" windows application it gave the below response

Code:

Querying target system called:

 xxx.xxx.xx.xxx

Attempting to resolve IP address to a name...


IP address resolved to Jane-PC

querying...

TCP port 50020 (unknown service): LISTENING

I did query localhost (127.0.01) also

Code:

Querying target system called:

 127.0.0.1

Attempting to resolve IP address to a name...


IP address resolved to na1r.services.adobe.com

querying...

TCP port 50020 (unknown service): LISTENING

Any one can help me to start my MN..
Thanks in advance