Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux)

[trinityfl]

so what i do now

go to xmr talk

[AzzAz]

so what i do now

go to xmr talk

https://asktom.cf/index.php?topic=638915.2880
bro

[ghostfaceuk]

zec down to $43 a coin now.  are we going to see many people leave and go back to XMR/ETH or do people think there is still enough profit in it to keep mining?

[gaah]

zec down to $43 a coin now.  are we going to see many people leave and go back to XMR/ETH or do people think there is still enough profit in it to keep mining?

They will rise! don't give up bro. . .

[ghostfaceuk]

zec down to $43 a coin now.  are we going to see many people leave and go back to XMR/ETH or do people think there is still enough profit in it to keep mining?

They will rise! don't give up bro. . .

I'm not giving up, all these people saying bro makes me think of Diamond Dallas Paige back in the WCW. (yes i'm old)

[jelin1984]

Can anyone post here the command I must have at claymore miner
For dwarpool?

[rpg]

zec down to $43 a coin now.  are we going to see many people leave and go back to XMR/ETH or do people think there is still enough profit in it to keep mining?

They'll squeeze miners out to control the hash and when they have enough the pump will start. Weak miners will just quit before and rush back in. Pump and dump 101

[xeridea]

zec down to $43 a coin now.  are we going to see many people leave and go back to XMR/ETH or do people think there is still enough profit in it to keep mining?

They'll squeeze miners out to control the hash and when they have enough the pump will start. Weak miners will just quit before and rush back in. Pump and dump 101

This, or whenever Z Address bugs are fixed. They seem to be taking their time.  They fixed one bug, so they kinda work, but there is another.

[rpg]

yep 5 hours no block this is realy bad luck for today. Never see this before

They are about 10 to 11 blocks under predicted by their 5% hash. It should be a funny catch up ahead. Some people play the mountains and valleys for an extra income edge. Now is too late for me to switch

[ghostfaceuk]

Can anyone post here the command I must have at claymore miner
For dwarpool?

This is my batch file

set GPU_FORCE_64BIT_PTR=0
set GPU_MAX_HEAP_SIZE=100
set GPU_USE_SYNC_OBJECTS=1
set GPU_MAX_ALLOC_PERCENT=100
set GPU_SINGLE_ALLOC_PERCENT=100
ZecMiner64.exe -tt 76 -zpool   zec-eu1.dwarfpool.com:3333 -zwal your wallet address -zpsw x -allpools 1 -i 6 -mport 0 -dbg -1

[nowaltcoin]

yep 5 hours no block this is realy bad luck for today. Never see this before

They are about 10 to 11 blocks under predicted by their 5% hash. It should be a funny catch up ahead. Some people play the mountains and valleys for an extra income edge. Now is too late for me to switch

flypool 18.000 Msol/s => 183 blocks per day => 7.625 blocks per hour
dwarfpool 2.500 Msol/s => 25 blocks per day = 1 block per hour

7 hours without a block will not be catched up the next 24 hours .....

[BitJunkie556]

Left Flypool two days ago, in favor of Nanopool... Will try dwarf, but I can say very easily that Nanopool is showing better results than Flypool was.

One of my biggest complaints with Flypool was the updating of hashrate on the pool. Nanopool shows your average for the last 6 hours, rather than having to wait 24 with flypool...

[chronek]

flypool 18.000 Msol/s => 183 blocks per day => 7.625 blocks per hour
dwarfpool 2.500 Msol/s => 25 blocks per day = 1 block per hour

7 hours without a block will not be catched up the next 24 hours .....

Yes, 7 hours without block it is pain... But dwarf can 4 per hours too (from stats),
still even with that 7 hours wait on dwarfpool i got on last 24h more than usual on flypool, but should consider change to monero or other coin

[Rabinovitch]

Can anyone post here the command I must have at claymore miner
For dwarpool?

Please guys don't be so lazy. Your config for Dwarf pool (btw wait for a while - I'm sure you'll start to shout that this pool is underpaying for about 30%, but not now) will look just like for any other pool. All necessary info you can easily find here: http://dwarfpool.com/zec.

Please don't be so lasy like complete noobs are.

[almirfiorio]

Dear Friends

what is the best coin that im miner together ether ?
What is Sol Coin ? is best ?

Thanks
Almir

[Altcoining]

Can anyone post here the command I must have at claymore miner
For dwarpool?

Readme.txt

[maxrena]

hopely this will help you, if all your hardware don't have a problem from PSU,cable, and riser, instal the lastest driver ( in my experience for multiple GPU wait until finish all instal the driver), restart, and run MAB set default for all setting accept fan speed as you needed at your temp room, and then run claymore v.9.1. If still get hang try setting your intensity one by one from 5, 6,7 or 8.  

I did all those steps, but no use. And yes, I have latest catalyst 16.11.2, I even low intensity to 4. May I ask about your hardware, like CPU, Mobo, PSU, RAM, and OS? I read from above that it need 80 bronze cert PSU, im not sure if that's the problem, or from my OS.

[BitJunkie556]

hopely this will help you, if all your hardware don't have a problem from PSU,cable, and riser, instal the lastest driver ( in my experience for multiple GPU wait until finish all instal the driver), restart, and run MAB set default for all setting accept fan speed as you needed at your temp room, and then run claymore v.9.1. If still get hang try setting your intensity one by one from 5, 6,7 or 8.  

I did all those steps, but no use. And yes, I have latest catalyst 16.11.2, I even low intensity to 4. May I ask about your hardware, like CPU, Mobo, PSU, RAM, and OS? I read from above that it need 80 bronze cert PSU, im not sure if that's the problem, or from my OS.

Just my .02, but I believe the default intensity is 4. I could be wrong, but I have set -i 4 and my hashrate is same as default without setting intensity. Try backing it down to 1 or 2, then try to get up to 3 and see what runs stable.

Also, suppose you have a 1000 watt bronze psu and 4 RX 480's running. 150 watts per card. They actually use much less, but that would be 600 watts. Then your cpu is maybe going to be pulling 100 max, and that's if it ever gets to any kind of load... You'd have lots of headroom. Unless you're trying to run a 6 card rig on 1000 watt psu lol.

[Nthused]

I use intensity set to -2 all the time when I do mine Equihash with my 280x's and have no invalid reds or any of that, Version 9 and 9.1 works perfectly for me although I haven't done power readings on each version yet compared to Version 8.

[maxrena]

hopely this will help you, if all your hardware don't have a problem from PSU,cable, and riser, instal the lastest driver ( in my experience for multiple GPU wait until finish all instal the driver), restart, and run MAB set default for all setting accept fan speed as you needed at your temp room, and then run claymore v.9.1. If still get hang try setting your intensity one by one from 5, 6,7 or 8.  

I did all those steps, but no use. And yes, I have latest catalyst 16.11.2, I even low intensity to 4. May I ask about your hardware, like CPU, Mobo, PSU, RAM, and OS? I read from above that it need 80 bronze cert PSU, im not sure if that's the problem, or from my OS.

Just my .02, but I believe the default intensity is 4. I could be wrong, but I have set -i 4 and my hashrate is same as default without setting intensity. Try backing it down to 1 or 2, then try to get up to 3 and see what runs stable.

Also, suppose you have a 1000 watt bronze psu and 4 RX 480's running. 150 watts per card. They actually use much less, but that would be 600 watts. Then your cpu is maybe going to be pulling 100 max, and that's if it ever gets to any kind of load... You'd have lots of headroom. Unless you're trying to run a 6 card rig on 1000 watt psu lol.

I have 2 x 750W PSU, each PSU runs 3 cards.
I dont blame Claymore 9.0 or 9.1, I had this problem since the first time I use claymore, since 5.0. There will be 1 card always not working, will hash 0 H/s. After a certain of time, watchdog says that GPU hangs and reset.
No matter how many GPU I use, there will be 1 not working.
My temporary fix was keep rebooting until all GPUs working, but now that ways seems not work anymore.