Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux)

[KrokoTill]

Anyone know why R7 370 has 4GB's of ram but reports as 3GB's with this miner was doing this in earlier versions as well?

Why - no idea. And yes, it has been so in all versions

[arielbit]

v9.2

280x    ~220H/s
390      ~325H/s
290x    ~315H/s
Fury     ~350H/s
480      ~260H/s

stock bios, overclocked, 16.10.3

480 reference overclock?

his roaring oc

[toptek]

Quote from: tide881155 on December 22, 2016, 10:32:25 PM
I have just 225 s/h on my ref rx 480 8gb. I am using eliovp rom... Energylowok. Plz who can help to link rom atleast ~245 s/h? I have two kids, i do not have any time for experimenting with timing with my 34 rx 480:(


Look here or ask here https://forum.z.cash/t/anoraks-vbios-collection-optimized-settings-for-performance-power-saving/8347 for zec Mining modded bios .

you can get some real good help here with no Issues.  id offer some help but my bios is custom, i did it my self for a power color red dragon 480 4gb and don't like offer to do it for anyone for  reason beyond my control that card was a bitch to get just right .
I even bricked it a few times trying different bios setting.

RX 480 8G doing 265-270 sol , stock miner settings, 1165 core, 2000 mem
380 4G doing 170 sol, 1075/1500
290 310 sol, 1000/1250.

Ubuntu 14.04

nice job Claymore


Greetings

How did u get this hashes on 480???265-270! omg... did u use reference one?

me to considering the drivers Claymore says use don't support 480 ? . if he using mixed cards thats got to be hard and take lot of time to set up right.

I'll stay with windows because end the end they all about the same .

With Linux you'll need Tahiti, R9 280 or better cards, for easier setup with the RX series, weird though that they choose to leave the 78xx/ 79xx of Tahiti's out though.

SO the drivers work with the R9 280 non X version that work with the RX 400 series now ?. and your right it depends on what card you are trying to use . .

I haven't tired  the new amdgpupro drivers yet or looked at what they support with 16.5 some thing or some thing like that.

I'll check .

thanks top .

[amfofo]

i have 3 rigs with rx 480, 390, 390x and 7990 all working fine thc Claymore

whats your hashrate with 7990?

[grendel25]

Claymore, you are awesome!

[Gogreen]

Been mining with v9.1 so far it is stable, i also order this baby from ebayto try out because my MB has only 4 pci-e slots. so i got this to add more GPU!



The device card also uses the United States Pericom Pericom PI7C9X bridge chip, for switching PCI-E, PCI-E between.
But even USB 3.0, but also the theoretical bandwidth 5Gbps (625MB / s), one Into four Then remove the loss would only 150MB / s, and even PCI-E 1.x single-channel bandwidth also has 250MB / s, So this stuff more than enough to give you the best slots, there will not be enough bandwidth, not only for the performance requirements of the place. Therefore, the transferred PCI-E slot is the best version above 2.0, the 3.0 version is better.

See installation or you can Order here ->    http://tinyurl.com/gmclx9n 

Which mobo are you using? Z170 chipset??

i have one of these things laying around i ordered it a while back
i got a board that also only allows four cards , do u have to supply power

to it cia the sata cable?

same like pluging into your sata power. no need extra power supply.

[DebitMe]

Any advice, how would I get this to auto start up when Windows 10 starts up?

[muchoman]

Any advice, how would I get this to auto start up when Windows 10 starts up?

I'm using this one
http://www.z-cron.com/

windows task scheduler doe's not work for me

[golden0707]

Any advice, how would I get this to auto start up when Windows 10 starts up?

Hi! Create a link to .bat-file, run shell:common startup , place in this windows . Thats it.

[awrelll]

Hello, any linux users ? What drivers do you use ? Is it working on Ubuntu 16 + amdgpupro ?
Thanks !

[niko2004x]

Hello, any linux users ? What drivers do you use ? Is it working on Ubuntu 16 + amdgpupro ?
Thanks !

Ubuntu 16 + amdgpupro + rx series card gives me immediate segfault.

[awrelll]

Hello, any linux users ? What drivers do you use ? Is it working on Ubuntu 16 + amdgpupro ?
Thanks !

Ubuntu 16 + amdgpupro + rx series card gives me immediate segfault.

I feel your pain !   {Update - Reinstalling the amd driver fixed it}

[Xardas2014]

Any advice, how would I get this to auto start up when Windows 10 starts up?

Hi! Create a link to .bat-file, run shell:common startup , place in this windows . Thats it.

That solution will not work if you have a user password. Unfortunately I'm stuck in that situation on one rig(windows isn't registered so it won't let me remove the password) and I have to teamviewer in, which gets windows to the desktop, so the .bat in startfolder loads


EDIT: After posting my reply I reread and noticed a slight difference. I have my shortcut in shell:startup, not shell:common startup. I see that using common startup is in the ProgramData tree, instead of the AppData tree. So I'll have to test it.

[sammy007]

Dec 23 18:31:40 rig zecminer64[2097]: ZEC: Share accepted (2 ms)!
Dec 23 18:31:41 rig zecminer64[2097]: server: bind failed with error: 98, next attempt in 10sec...
Dec 23 18:31:51 rig zecminer64[2097]: server: bind failed with error: 98, next attempt in 10sec...

On linux. Any idea what is 98 error?

[golden0707]

Any advice, how would I get this to auto start up when Windows 10 starts up?

Hi! Create a link to .bat-file, run shell:common startup , place in this windows . Thats it.

That solution will not work if you have a user password. Unfortunately I'm stuck in that situation on one rig(windows isn't registered so it won't let me remove the password) and I have to teamviewer in, which gets windows to the desktop, so the .bat in startfolder loads


EDIT: After posting my reply I reread and noticed a slight difference. I have my shortcut in shell:startup, not shell:common startup. I see that using common startup is in the ProgramData tree, instead of the AppData tree. So I'll have to test it.

Hmmmm.... I have same situation. W 10 with teamviewer, Windows not registered. Windows autostarts , .bat starts automaticaly.

All ive done : remove user password, remove power sleep, remove auto lock screen, put link in autostart. Have hardware watchdog installed and all going fine for months.   

[oldisoft]

Hi Friends!

Anybody is on miningpoolhub?   What wrong with it? It made me just half of my day profit of 24/7...

Or may be difficulty became stronger? or this is just shit on this pool?

And like usually question:))) What is the best pool for today?

Cheers

[golden0707]

Hi Friends!

Anybody is on miningpoolhub?   What wrong with it? It made me just half of my day profit of 24/7...

Or may be difficulty became stronger? or this is just shit on this pool?

And like usually question:))) What is the best pool for today?

Cheers

Same thing on other pool. Thougt they steel shares. Last night diff was up to 1370000

[Xardas2014]

Any advice, how would I get this to auto start up when Windows 10 starts up?

Hi! Create a link to .bat-file, run shell:common startup , place in this windows . Thats it.

That solution will not work if you have a user password. Unfortunately I'm stuck in that situation on one rig(windows isn't registered so it won't let me remove the password) and I have to teamviewer in, which gets windows to the desktop, so the .bat in startfolder loads


EDIT: After posting my reply I reread and noticed a slight difference. I have my shortcut in shell:startup, not shell:common startup. I see that using common startup is in the ProgramData tree, instead of the AppData tree. So I'll have to test it.

Hmmmm.... I have same situation. W 10 with teamviewer, Windows not registered. Windows autostarts , .bat starts automaticaly.

All ive done : remove user password, remove power sleep, remove auto lock screen, put link in autostart. Have hardware watchdog installed and all going fine for months.   

My bet it is because of the difference between shell:startup and shell:common startup. My guess would be that since shell:common startup is in the Program Data folder tree, W10 runs it more like a service so it starts at bootup BEFORE you visit the desktop using team viewer. I'll test it a bit and try to remember to post results. I've put a shortcut into the shell:common startup since I have frequent power outages(3-4 times a month grrrrr) and see what happens. With the shortcut in shell:startup you have to sign into the desktop before the .bat gets activated.

[Xardas2014]

Hi Friends!

Anybody is on miningpoolhub?   What wrong with it? It made me just half of my day profit of 24/7...

Or may be difficulty became stronger? or this is just shit on this pool?

And like usually question:))) What is the best pool for today?

Cheers

Same thing on other pool. Thougt they steel shares. Last night diff was up to 1370000

miningpoolhub has an honest OP. He is quite active and quick to answer support questions. I use miningpoolhub for my Baikal and my scrypt ASIC's, but not my GPU rigs(yet) simply because I want the coins mined by the ASIC's to be converted automatically to BTC, but I don't want the GPU coins converted. I use dwarfpool for ZEC and ETH algos.

[golden0707]

Hi Friends!

Anybody is on miningpoolhub?   What wrong with it? It made me just half of my day profit of 24/7...

Or may be difficulty became stronger? or this is just shit on this pool?

And like usually question:))) What is the best pool for today?

Cheers

Same thing on other pool. Thougt they steel shares. Last night diff was up to 1370000

miningpoolhub has an honest OP. He is quite active and quick to answer support questions. I use miningpoolhub for my Baikal and my scrypt ASIC's, but not my GPU rigs(yet) simply because I want the coins mined by the ASIC's to be converted automatically to BTC, but I don't want the GPU coins converted. I use dwarfpool for ZEC and ETH algos.

Well, Iv got only GPUs. And yes I use dwarfpool for ETH , bcz. they have more hashpower then others, but not for ZEC , they have not mush hashpower.