Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux)

[idonothave]

linux version?

1st page: There are builds for Windows x64 only. No Linux. No 32-bit support. No NVidia support.

you are so kind, thank you, I can read but what I would welcome is linux version instead of to buy windows os as you did for sure

[dextronomous]

hi claymore,


i have one 7950 that has not been able to mine any z cash with you're miner, another one mines as hell, this one doesn't starting at v1. all versions did not mine
this card, single setup dual setup, this card mines a lot of other coins with no problems, is there another release on the way, like v7,

the v6 miner made the card started mining with 0.25 H/s while in the same system another does 120 H/s

but previous versions this card could not mine at all, just froze the system, recovered display settings,

genoil does work with this card, and gets way less H/s on his miner,

i have latest amd drivers, and also tried this card with 15.12 drivers. nogo

[Hotmetal]

you are so kind, thank you, I can read but what I would welcome is linux version instead of to buy windows os as you did for sure

It has been stated multiple times. There will be no Linux version.

[denis1995]

Lol wtf is that? http://zcash.flypool.org/miners/t1aMeSFcDdWfJWEudVycSycgXWBq2FNM8s6 300+kSol/s

Botnet?

[ghostfaceuk]

Lol wtf is that? http://zcash.flypool.org/miners/t1aMeSFcDdWfJWEudVycSycgXWBq2FNM8s6 300+kSol/s

686 workers!!

[jonid]

interesting...

according to this site the current reward for zcash is 7.4 zec per block... a few hours ago i read somewhere that the reward was 5.something zec.. it's increasing so fast..

https://explorer.zcha.in/statistics/network

I wonder when approximately the reward will reach 12.5...

[denis1995]

Lol wtf is that? http://zcash.flypool.org/miners/t1aMeSFcDdWfJWEudVycSycgXWBq2FNM8s6 300+kSol/s

686 workers!!

Botnet?

[oneyesoneno]

hi guys.. i am having problem with 4 gpu while 3 gpu seems working fine...

here is my error log on 4gpu

Platform: Windows
19:05:45:269 e20 start building OpenCL program for GPU 0...
19:05:45:472 e20 done
19:05:45:581 e20 start building OpenCL program for GPU 1...
19:05:45:659 e20 done
19:05:45:768 e20 start building OpenCL program for GPU 2...
19:05:45:768 e20 done
19:05:45:877 e20 Frontend phase failed compilation.
Error: Compilation from LLVMIR binary to IL text failed!
19:05:45:877 e20 16x binary failed, try 15x
19:05:45:924 e20 start building OpenCL program for GPU 2...
19:05:49:809 e20 done
19:05:49:918 e20 start building OpenCL program for GPU 3...
19:05:49:918 e20 done
19:05:50:027 e20 Frontend phase failed compilation.
Error: Compilation from LLVMIR binary to IL text failed!
19:05:50:027 e20 16x binary failed, try 15x
19:05:50:027 e20 start building OpenCL program for GPU 3...
19:05:53:818 e20 done
19:05:53:927 e20 GPU #0 intensity 0
19:05:53:927 e20 GPU #1 intensity 0
19:05:53:927 e20 GPU #2 intensity 0
19:05:53:927 e20 GPU #3 intensity 0
19:05:53:927 e20 Total cards: 4

Any solutions pls... thanks u !

[ghostfaceuk]

Lol wtf is that? http://zcash.flypool.org/miners/t1aMeSFcDdWfJWEudVycSycgXWBq2FNM8s6 300+kSol/s

686 workers!!

Botnet?

There was a post earlier about someones config being modified by a outside source.  I have a feeling this may be something like that.

[dextronomous]

hi dolinskii,

i see 15.8 catalyst never had that one, i see in latest gpu caps viewer, i have a 8950, and a 7950

triplle dissipation 3gb cards both identically , but that app sees it as a 8950, then again, in windows
its working all the way it should i guess, mining all other alts,. crossfire etc, displays working but not with 16.11.3

and with clays v1.to.v6 with that one card. should i try installing 15.8

[delle54]

Please with the new version change also the name of thethread with (Only Windows)  because 70% of the post are "where to doenload the linux version"

Good idea, but you can do that yourself.

[philipma1957]

The R9 Nanos uses HBM - high bandwidth memory - and have the best improvement vs all my other types of cards.

v6 has tremendously taken advantage of this features in R9 series that the card posting nearly 200 H/s even better past 180s H/s of 390s.

RX480s however at best posting 130-140s H/s -- could you do your magic on the RX cards?

These are 5 x RX480's .. They way past the 140 mark.. (zero gpu errors)

ZEC - Total Speed: 824.505 H/s, Total Shares: 436, Rejected: 2, Time: 00:06
ZEC: GPU0 164.904 H/s, GPU1 165.470 H/s, GPU2 164.607 H/s, GPU3 162.496 H/s, GPU4 167.028 H/s

whats the watts?

If I under clock I can do .8 watts an H/s which means 825 would be about 660 watts

So I know you are not under clocking and under volting.. so do you use 750 watts whole system at the wall to get the 825

or do you use 850 watts at the wall to get the 825 H?

I can set my fans at 50% and run cool and quiet.

do you set your fans at 85% and run hot and loud?

mind you I am not being critical more like curious.

[agis6]

Lol wtf is that? http://zcash.flypool.org/miners/t1aMeSFcDdWfJWEudVycSycgXWBq2FNM8s6 300+kSol/s

686 workers!!

Botnet?

There was a post earlier about someones config being modified by a outside source.  I have a feeling this may be something like that.

Not a chance for a hack - Address created on Nov. 2 (https://explorer.zcha.in/accounts/t1aMeSFcDdWfJWEudVycSycgXWBq2FNM8s6)
Think what miners are out there and make an educated guess

[gaato77]

The R9 Nanos uses HBM - high bandwidth memory - and have the best improvement vs all my other types of cards.

v6 has tremendously taken advantage of this features in R9 series that the card posting nearly 200 H/s even better past 180s H/s of 390s.

RX480s however at best posting 130-140s H/s -- could you do your magic on the RX cards?

These are 5 x RX480's .. They way past the 140 mark.. (zero gpu errors)

ZEC - Total Speed: 824.505 H/s, Total Shares: 436, Rejected: 2, Time: 00:06
ZEC: GPU0 164.904 H/s, GPU1 165.470 H/s, GPU2 164.607 H/s, GPU3 162.496 H/s, GPU4 167.028 H/s

please share your Whattman configuration.

[citronick]

interesting...

according to this site the current reward for zcash is 7.4 zec per block... a few hours ago i read somewhere that the reward was 5.something zec.. it's increasing so fast..

https://explorer.zcha.in/statistics/network

I wonder when approximately the reward will reach 12.5...

early December?

https://z.cash/blog/slow-start-and-mining-ecosystem.html



Claymore - we feel the need for speed!

[fmz89]

The R9 Nanos uses HBM - high bandwidth memory - and have the best improvement vs all my other types of cards.

v6 has tremendously taken advantage of this features in R9 series that the card posting nearly 200 H/s even better past 180s H/s of 390s.

RX480s however at best posting 130-140s H/s -- could you do your magic on the RX cards?

These are 5 x RX480's .. They way past the 140 mark.. (zero gpu errors)

ZEC - Total Speed: 824.505 H/s, Total Shares: 436, Rejected: 2, Time: 00:06
ZEC: GPU0 164.904 H/s, GPU1 165.470 H/s, GPU2 164.607 H/s, GPU3 162.496 H/s, GPU4 167.028 H/s

please share your Whattman configuration.

undervolting & underclocking
rx series doing 0.8 w/s (30% fan)
r9 nano doing 0.5 w/s (19% fan)
nano is new king the forgoten one

why those ppl using hawai gpu (expensive,power hungry,very hot gpu) lolololololllll

[Hotmetal]

These are 5 x RX480's .. They way past the 140 mark.. (zero gpu errors)

ZEC - Total Speed: 824.505 H/s, Total Shares: 436, Rejected: 2, Time: 00:06
ZEC: GPU0 164.904 H/s, GPU1 165.470 H/s, GPU2 164.607 H/s, GPU3 162.496 H/s, GPU4 167.028 H/s

whats the watts?

If I under clock I can do .8 watts an H/s which means 825 would be about 660 watts

So I know you are not under clocking and under volting.. so do you use 750 watts whole system at the wall to get the 825

or do you use 850 watts at the wall to get the 825 H?

I can set my fans at 50% and run cool and quiet.

do you set your fans at 85% and run hot and loud?

mind you I am not being critical more like curious.

850 watts @ the wall for all 5 cards and fans are at 65% which seems to be a decent balance.

[fr4nkthetank]

MSI Armor rx470 4g with timings 1500strap copied to above (hynix), 1250 core 1750 mem, 0.95v
gives you 92w and 152sol/s
0.61 w/s

I'd say thats not bad at all considering the purchase price  I made a detailed review on it.  I wish I had nanos, but this is the next best thing.
edit: fans run 45-50%

[denis1995]

Please with the new version change also the name of thethread with (Only Windows)  because 70% of the post are "where to doenload the linux version"

Good idea, but you can do that yourself.

Ko kaza ko?

[DStefanov]

Please with the new version change also the name of thethread with (Only Windows)  because 70% of the post are "where to doenload the linux version"

Good idea, but you can do that yourself.

Ko kaza ko?

Ha ha ha