Swedish ASIC miner company kncminer.com

[CYPER]

https://www.kncminer.com/news/news-57

All,
Ok so after a weekend of producing boards and over 600 boxes shipped in the last few days I have imported the last of the October orders into the production Queue,  If the factory have a good day tomorrow they should be able to completely finish the Order queue for all orders that had an October shipment.
We know it’s been a long road with quite a lot of bumps in it but the end is near.
Thanks again for your understanding during this time. We have indeed learnt a lot form this experience and we will be using all of those lessons in our future products
Thanks
KnCMiner team

We have indeed learnt a lot form this experience and we will be using all of those lessons in our future products.

This sounds like: Thank you for being our guinea pigs.

[yuriygeorge]

I see network hashrate that was 3.25PH/s when I looked late yesterday was a moment ago only 2.72 and now is 2.9.  I wonder if it's KnC miner users shutting down and restarting with the new firmware.

KNC Pool (https://portal.kncminer.com/) speed already 70 +TH/s (from about 25 TH/s for 24 hrs ). What it mean?

The firmware worked in the datacentre. It was tested on the hosting facility last night, then released today as it was deemed stable.

Hi, Bitcoinorama!

While we have you here and since you mention the hosting facility. Any news from there? Any fires or other disasters preventing new units from being added to it?

Only my and several other people's orders are skipped, while later non-hosted orders are being shipped. You said earlier that the queue was sacred...

The responses I got from support were non-commital, along the lines of "we know there are problems with the data centre, our engineers are working on it." I haven't heard any single existing hosted customer reporting any problems with their equipment that is already running there.

Any specific information would be welcome.

Thank you.

Yes, Bitcoinorama, please enlighten us! Have they run out of power/space or something? What is going on

[ElGabo]

I think everybody has to start somewhere. There are always issues what you can't see in the future.

They made a good product, they hadn't stole our money, they had shipped close to time.

Show me an asic company how made the same.....

Of course they learned a lot and won't make the same issues at gen 2.

That my 2 c.

[CYPER]

I think everybody has to start somewhere. There are always issues what you can't see in the future.

They made a good product, they hadn't stole our money, they had shipped close to time.

Show me an asic company how made the same.....

Of course they learned a lot and won't make the same issues at gen 2.

That my 2 c.

I assume you have received your miner?

[eurgbp2011]

I've enabled all params CGMiner API Enabled
 
CGMiner Remote Management Enabled

and restarted

but v0.97 says


Mining Status

CGMiner Status Running (Connect to CGMiner API failed)
Last Checked  
Avg. Hash Rate  
WU  
Difficulty Accepted  
HW Status


No data shown ?

[madsusies]

  there will not be a 2th gen. The diff rise too quickly and no one pay 5k $ for non ROI miner (a month waiting + month mning + 2-3x diff rise)  in 2014 will bfl red flag earn less then 2k $ in feb

[Phoenix1969]

i got my Mercury today. very quiet at 100GH with 0.9.7 FW
120W/220v  !!!
great job KNC
i guess we cannot overclock it yet :p

so, you are happy with 100 gh/s?, even though it's 25 gh/s short?
guess many are.
all my saturns returned right back to their norms, but with slight difference...
256, 263, and 279. I really like the 279,....
but geeze. I feel like a squid broker after my first pump & dump.
ill live... I reccon.
but I would still like to fix the 256 saturn tho. when I use enablecores, it goes all the way up to 280 on 0.90 at first, but slows to 250
reflashing the firmware always has the same result on it, it always returns to 250, and takes hours to return to 255.

[ncs0ne]

I want to sell one of my jepiter
i have three of them and they are all running over 555ghs
pm if interested for more info or pic
accept bitcoin payment only (bank transfer to oversea costing too many time which is reducing you profit)

yea sure, yours are running 555+ while all others are below...
*I'd recommend to not make deals with this person without escrow*

[sbfree]

KnC 0:                | 263.0G/258.5Gh/s | A:643328 R:17152 HW:190848 WU:4047.9


is something wrong here?

[loktang1125]

I want to sell one of my jepiter
i have three of them and they are all running over 555ghs
pm if interested for more info or pic
accept bitcoin payment only (bank transfer to oversea costing too many time which is reducing you profit)

yea sure, yours are running 555+ while all others are below...
*I'd recommend to not make deals with this person without escrow*

you dont know the way to ask question that make you look like a fool

[Rawbit]

I want to sell one of my jepiter
i have three of them and they are all running over 555ghs
pm if interested for more info or pic
accept bitcoin payment only (bank transfer to oversea costing too many time which is reducing you profit)

yea sure, yours are running 555+ while all others are below...
*I'd recommend to not make deals with this person without escrow*

you dont know the way to ask question that make you look like a fool
http://holland.pk/1bmn

How you get such score? :-)

[loktang1125]

KnC 0:                | 263.0G/258.5Gh/s | A:643328 R:17152 HW:190848 WU:4047.9


is something wrong here?

did you try 0.95 and 0.97?
if it happen in all FW, you might need to give your miner more airflow

[paranoidx]

I want to sell one of my jewpiter
i have three of them and they are all running over 555ghs
pm if interested for more info or pic
accept bitcoin payment only (bank transfer to oversea costing too many time which is reducing you profit)

Sounds legit.

[loktang1125]

I want to sell one of my jepiter
i have three of them and they are all running over 555ghs
pm if interested for more info or pic
accept bitcoin payment only (bank transfer to oversea costing too many time which is reducing you profit)

yea sure, yours are running 555+ while all others are below...
*I'd recommend to not make deals with this person without escrow*

you dont know the way to ask question that make you look like a fool

How you get such score? :-)

by putty, you could download it and login to your rig by
id : root
pw : admin
then type : screen -r

[ElGabo]

I think everybody has to start somewhere. There are always issues what you can't see in the future.

They made a good product, they hadn't stole our money, they had shipped close to time.

Show me an asic company how made the same.....

Of course they learned a lot and won't make the same issues at gen 2.

That my 2 c.

I assume you have received your miner?

Yes I have. And you will.

Not like Avalon or Bfl.....

[warhawk187]

After tinkering with enabled cores in 0.95, then upgrading to 0.96 and then today to 0.97, my Saturn is currently outputting ~278Gh/s with all 100% of my cores enabled. My WU went up to just over 4,000/m and my flushwork issue has gotten much better.

[sbfree]

KnC 0:                | 263.0G/258.5Gh/s | A:643328 R:17152 HW:190848 WU:4047.9


is something wrong here?

did you try 0.95 and 0.97?
if it happen in all FW, you might need to give your miner more airflow

thanks for the input, but unlikely as both chips are well below 50c.

I don't know diddly, but I think its a software issue, hoping SOMEONE puts up an easy plain English for dummies on how to install and run BFGMINER.....

[Tweak25]

Hey - I apologize profusely ... I imagine this HAS been answered before.

I was away for a week, just got back - and found my Jupiter waiting for me.

The problem is, can't get the thing to boot.

Have an XFX pro 1050W modular to run it.

Everything looks connected fine ... pci-e's are solid and the molex is in.
Paper clip tricked it on pins 4-5, 4-6, 4-whatever the one that's a row down and over is .... all with the same results .... PS fan and the jupiter fans spin for a sec, then nothing.

Not getting any lights, or anything else. That's it.


Now I'm wondering if I have a dead supply out of the box, which seems unlikely .... or if I'm simply fucking something up .... which sounds much more likely.

Can you help a (very excited) brother out?

Thanks very much.
John

[EDIT] I AM trying to catch up ... but I'm still about hundred pages behind.

[sbfree]

After tinkering with enabled cores in 0.95, then upgrading to 0.96 and then today to 0.97, my Saturn is currently outputting ~278Gh/s with all 100% of my cores enabled. My WU went up to just over 4,000/m and my flushwork issue has gotten much better.

My saturn envies your saturn

[loktang1125]

After tinkering with enabled cores in 0.95, then upgrading to 0.96 and then today to 0.97, my Saturn is currently outputting ~278Gh/s with all 100% of my cores enabled. My WU went up to just over 4,000/m and my flushwork issue has gotten much better.

278ghs is nice for saturn, two of my Jupiter WU get very close to 8k but they cant made it :-(