Swedish ASIC miner company kncminer.com

[Xialla]

previous .93 and avg hashrate was ~510 with lot of cgminer restarts and FPGA disable... errors. It seems, that the newest one is slightly better.

xialla, i have also read that you should try to set difficulty higher...unless your pool auto. sets difficulty

yeah, now running on gigavps semi private, 625 diff and rejects are now ~1.8%

[Madazam]

[/quote]

the only thing I can come up with now is that your device has been assigned to you per order#/pay date....but then your unit happens to be defective....now it gets bypassed until new parts arrive for your unit, while the guy behind you lucks out, gets assigned a GOOD unit, and it gets shipped/delivered....and the rest of us suckers get passed on by.....order queue is sacred....so sacred that if you unit is bunk it gets by passed so the guy behind you keeps his position in the SACRED QUEUE??
[/quote]

well that sucks ...the person whose unit was defective should be entertained first ..basic rule he paid first ....

[server]

are you planning to upgrade to 0.94?

Not yet, first I want to check if this setup runs stable for 24 hours at ~550 GH/s

[Madazam]

I understand man mine was also a preorder and now order number is 8xx with paid before you on 4 June, so i was in line before you in order number in payment order and was also a preorder for which i don't remember the number but do remember it was very early ...now you have your units ....(by the way congrats on that) and mine are still in progress for last 3 days ...i just don't get it ....even if i ignore your orders completely ..i was day 2 production and still i am in progress after 9 day of production ..i just dont get it ...


[/quote]


er could it be the production line ramp up I heard they had 10 lines and expanding...could it be just the expansion of such throwing some lines ahead of others (I know zip about mnfg just saying)
[/quote]


could be man ..now i am becoming hopeless...i am in a country where now 11 days of public holiday gonna start ..everything shuts down ..so even if they ship it will get stuck ......

[sbfree]

the only thing I can come up with now is that your device has been assigned to you per order#/pay date....but then your unit happens to be defective....now it gets bypassed until new parts arrive for your unit, while the guy behind you lucks out, gets assigned a GOOD unit, and it gets shipped/delivered....and the rest of us suckers get passed on by.....order queue is sacred....so sacred that if you unit is bunk it gets by passed so the guy behind you keeps his position in the SACRED QUEUE??
[/quote]

well that sucks ...the person whose unit was defective should be entertained first ..basic rule he paid first ....
[/quote]

not saying it's right, but I have no other explaination for why one person with a later order #/pay date gets their KNC unit before someone with an earlier order # /pay date.....

or why some stay "in progress" while others actually receive units who went into 'in progress' status later. Nothing makes sense but what I stated above.

order #23xx ordered and paid june 18th saturn...status "in progress" as of Monday 1am pacific time....now more that 48HRS AGO!!!!!

[Searing]

new fw:

https://www.kncminer.com/news/news-47

my temp:

ASIC slot #1: 49.5 ℃
ASIC slot #2: 45.0 ℃
ASIC slot #3: 49.0 ℃
ASIC slot #4: 41.0 ℃

results:

(5s):575.6G (avg):535.7Gh/s | A:153750  R:8125  HW:14740  WU:8207.0/m

that brings to mind...what happens when you add some other fans pointed at the unit (the standing regular say floor fan) does that kinda air movement with the case off hurt/help?

[mruiter]

Mine are instable.

Temps are high

ASIC slot #1: 76.0 ℃
ASIC slot #2: 74.5 ℃
ASIC slot #3: 79.5 ℃
ASIC slot #4: 64.0 ℃

Fans are OK. Airflow ok. Airflow all the same way. Normal room temp of 20 degrees.
Is there a way i can tell the fans to go faster.

Edit: Update ASIC slot #3: 81.0 ℃

[sickpig]

Mine are instable.

Temps are high

ASIC slot #1: 76.0 ℃
ASIC slot #2: 74.5 ℃
ASIC slot #3: 79.5 ℃
ASIC slot #4: 64.0 ℃

Fans are OK. Airflow ok. Airflow all the same way. Normal room temp of 20 degrees.
Is there a way i can tell the fans to go faster.

fw?
hash rate?

[FUKT]

the only thing I can come up with now is that your device has been assigned to you per order#/pay date....but then your unit happens to be defective....now it gets bypassed until new parts arrive for your unit, while the guy behind you lucks out, gets assigned a GOOD unit, and it gets shipped/delivered....and the rest of us suckers get passed on by.....order queue is sacred....so sacred that if you unit is bunk it gets by passed so the guy behind you keeps his position in the SACRED QUEUE??

well that sucks ...the person whose unit was defective should be entertained first ..basic rule he paid first ....
[/quote]

not saying it's right, but I have no other explaination for why one person with a later order #/pay date gets their KNC unit before someone with an earlier order # /pay date.....

or why some stay "in progress" while others actually receive units who went into 'in progress' status later. Nothing makes sense but what I stated above.

order #23xx ordered and paid june 18th saturn...status "in progress" as of Monday 1am pacific time....now more that 48HRS AGO!!!!!
[/quote]

The 23XX order that has been quoted, has that been verified? Could be just trolling!

[Searing]

Mine are instable.

Temps are high

ASIC slot #1: 76.0 ℃
ASIC slot #2: 74.5 ℃
ASIC slot #3: 79.5 ℃
ASIC slot #4: 64.0 ℃

Fans are OK. Airflow ok. Airflow all the same way. Normal room temp of 20 degrees.
Is there a way i can tell the fans to go faster.

SOME folks have had their fans arrive off and put them on wrong..you could check that all your fans are blowing the right direction imho

one guy had that issue earlier on here I guess it helped a bit

[Searing]

the only thing I can come up with now is that your device has been assigned to you per order#/pay date....but then your unit happens to be defective....now it gets bypassed until new parts arrive for your unit, while the guy behind you lucks out, gets assigned a GOOD unit, and it gets shipped/delivered....and the rest of us suckers get passed on by.....order queue is sacred....so sacred that if you unit is bunk it gets by passed so the guy behind you keeps his position in the SACRED QUEUE??

well that sucks ...the person whose unit was defective should be entertained first ..basic rule he paid first ....

not saying it's right, but I have no other explaination for why one person with a later order #/pay date gets their KNC unit before someone with an earlier order # /pay date.....

or why some stay "in progress" while others actually receive units who went into 'in progress' status later. Nothing makes sense but what I stated above.

order #23xx ordered and paid june 18th saturn...status "in progress" as of Monday 1am pacific time....now more that 48HRS AGO!!!!!
[/quote]

The 23XX order that has been quoted, has that been verified? Could be just trolling!
[/quote]

could it be people who paid by BTC or wire xfer....ie I know wire xfer is whenever the bank gets around to doing it..not sure about bank xfer (all I have as a guess) I did a wire xfer once took more then a day
[/quote]

[faetos]

I asked Customer Service where they are in the queue on what pay date, etc and got this response:

"The factory team are still producing day 2 orders. We are not able to give you the exact payment date as we don’t have the lastest update from them.
 
Should you have any further questions please do not hesitate to contact us."

[Searing]

previous .93 and avg hashrate was ~510 with lot of cgminer restarts and FPGA disable... errors. It seems, that the newest one is slightly better.

xialla, i have also read that you should try to set difficulty higher...unless your pool auto. sets difficulty

just my 2c here I've seen that mentioned a lot in the last day or so....hope it helps....think may have a thread on kncminer not sure

[Vega]

It's interesting. With 0.93 in the first 12 hours there were a few cgminer restarts, the av hashrate were 495 Gh/s, with high HW errors.
After about a day, hash rate climbed to 506 Gh/s and stayed there for 24 hours, not a single cgminer restart. The HW errors dropped too.

Just upgraded to 0.94 45 minutes ago, speed now is 473 Gh/s and climbing slowly. We'll see what happens in a day.

[Rampion]

It's interesting. With 0.93 in the first 12 hours there were a few cgminer restarts, the av hashrate were 495 Gh/s, with high HW errors.
After about a day, hash rate climbed to 506 Gh/s and stayed there for 24 hours, not a single cgminer restart. The HW errors dropped too.

Just upgraded to 0.94 45 minutes ago, speed now is 473 Gh/s and climbing slowly. We'll see what happens in a day.

Yep, I had the same experience - the more the miners run, the more stable and fast they become. For example, I have one Jupiter that worked flawlessly from day one, at the beginning hashrate was around 500GH/s, after +5 days running is now stable at 530GH/s (3 hours avg.)

[RHA]

my temp:

ASIC slot #1: 49.5 ℃
ASIC slot #2: 45.0 ℃
ASIC slot #3: 49.0 ℃
ASIC slot #4: 41.0 ℃

results:

(5s):575.6G (avg):535.7Gh/s | A:153750  R:8125  HW:14740  WU:8207.0/m

Xialla, you forgot to add your room temperature is 13 ℃.

[Rampion]

Update on miner with 0.94: hw errors going through the roof, they were previously 8% and they are now 19%

Hashrate slowly climbing to previous levels thou

[mruiter]

Mine are instable.

Temps are high

ASIC slot #1: 76.0 ℃
ASIC slot #2: 74.5 ℃
ASIC slot #3: 79.5 ℃
ASIC slot #4: 64.0 ℃

Fans are OK. Airflow ok. Airflow all the same way. Normal room temp of 20 degrees.
Is there a way i can tell the fans to go faster.

fw?
hash rate?

Hashrate 400 with lots of errors. Fans are blowing the right way, double checked.... Fw 94

[electrox]

My Saturn is hashing at 250 - 256 Gh/s.

However regularly cores are being disabled ("due to more than 10 HW errors) and then after a while enabled again only to be disabled shortly thereafter again.

During this process hash rate goes down to 150-200 Gh/s.
In the time the cores are disabled 5sec average is mostly around 266 Gh/s.

So I get the feeling that it would be better if those cores were disabled once and for all.
But maybe the new upgrade will fix this issue.

I summed up the cores that are being disabled: 11, 12, 14, 16, 17, 18, 19, 26, 29, 33, 34, 35, 38, 40, 41, 42, 43, 46, 47
Probably even more but those are the ones I have noticed.

What about you guys? Are you getting similar symptoms?
Is it normal?

may not apply but someone said on the kncminer forums to check you heatsink fans etc all blowing the right direction...some folks said they had to fix ..not sure it applies but figured i'd post it

Thanks searing for the tip. I checked and the fans are correctly installed.

[loktang1125]

what could be wrong if i cant connect to my miners
chrome : could not connect to 192.168.1.101 ( 102 103 also)