Swedish ASIC miner company kncminer.com

[RickJamesBTC]

ok also if have more than one miner

is better to put all the miner at same btc adress
or but for every miner different adress?

Don't use a different address, but at the end of each address put an underscore and a unique name to set them apart. _jupiter1 _jupiter2

[merv77]

ok also if have more than one miner

is better to put all the miner at same btc adress
or but for every miner different adress?

Don't use a different address, but at the end of each address put an underscore and a unique name to set them apart. _jupiter1 _jupiter2

thanks for the info

using one address and the unique underscore name, does it still let you view each miner stats separately?

[Bitcoinorama]

ok also if have more than one miner

is better to put all the miner at same btc adress
or but for every miner different adress?

Don't use a different address, but at the end of each address put an underscore and a unique name to set them apart. _jupiter1 _jupiter2

thanks for the info

using one address and the unique underscore name, does it still let you view each miner stats separately?

Yes, it overlays them one on top of each other upon the graph.

You get a different colour for each worker.

[ImI]

hey orama,

i got one november jupiter that has 3 die disabled on one board. any advise??

[merv77]

ok also if have more than one miner

is better to put all the miner at same btc adress
or but for every miner different adress?

Don't use a different address, but at the end of each address put an underscore and a unique name to set them apart. _jupiter1 _jupiter2

thanks for the info

using one address and the unique underscore name, does it still let you view each miner stats separately?

Yes, it overlays them one on top of each other upon the graph.

You get a different colour for each worker.

Cool, I must try this.
Thanks Orama

[AussieHash]

Neptunes are down to 787/1500
KNC details say only 1200 will be sold this batch.

Leaving 487 units up for grabs.

Don't forget kncminer.cn they seem to still have Jupiters for sale

[The Avenger]

Neptunes are down to 787/1500
KNC details say only 1200 will be sold this batch.

Leaving 487 units up for grabs.

Don't forget kncminer.cn they seem to still have Jupiters for sale

Shhh! First rule of knc miner - don't mention knc china.

[Biffa]

ok also if have more than one miner

is better to put all the miner at same btc adress
or but for every miner different adress?

Don't use a different address, but at the end of each address put an underscore and a unique name to set them apart. _jupiter1 _jupiter2

thanks for the info

using one address and the unique underscore name, does it still let you view each miner stats separately?

Yep thats what I do, and in the graph they are coloured differently, plus you can clock on "Toggle display of Worker details" and you get the stats in numbers rather than a graph.

See the Eligius FAQ: http://eligius.st/~gateway/faq-page#t9n72

[joeventura]

Anyone have a single Oct Upgrade module they want to sell?

Please PM me, happy to pay premium.

[Biffa]

hey orama,

i got one november jupiter that has 3 die disabled on one board. any advise??

I think we need to wait for the tuning suite, mines like this currently (657Gh/s):

Board 0 - 3 Cores off - All VRM fine
Board 2 - 3 Cores off - VRM 7 - FAULT 4
Board 3 - 3 Cores off - VRM 0,2,5,7 - FAULT 4
Board 4 - 2 Cores off - All VRM fine

[helmax]

also here sometimes cores dies  
november batch

[ImI]

hey orama,

i got one november jupiter that has 3 die disabled on one board. any advise??

I think we need to wait for the tuning suite, mines like this currently (657Gh/s):

Board 0 - 3 Cores off - All VRM fine
Board 2 - 3 Cores off - VRM 7 - FAULT 4
Board 3 - 3 Cores off - VRM 0,2,5,7 - FAULT 4
Board 4 - 2 Cores off - All VRM fine

yeah, i am lookin forward for the tuning-suite too

here it looks more like this

Board 0 - 3 dies off

so its running at 25%

how to look-up the VRMs??

[Biffa]

hey orama,

i got one november jupiter that has 3 die disabled on one board. any advise??

I think we need to wait for the tuning suite, mines like this currently (657Gh/s):

Board 0 - 3 Cores off - All VRM fine
Board 2 - 3 Cores off - VRM 7 - FAULT 4
Board 3 - 3 Cores off - VRM 0,2,5,7 - FAULT 4
Board 4 - 2 Cores off - All VRM fine

yeah, i am lookin forward for the tuning-suite too

here it looks more like this

Board 0 - 3 dies off

so its running at 25%

how to look-up the VRMs??

Bertmod 0.4 http://forum.kncminer.com/forum/main-category/main-forum/20546-bertmod-0-4-unofficial-firmware-mod-feedback-thread

[FUKT]

I have NEVER paid a penny for a faulty item to be replaced or repaired, this is called a warranty and is the whole fucking point of one. To keep the customer happy because he has peace of mind that his product will always be available during the warranty period, I have never even paid postage. When it breaks under warranty that is THE VENDORS/ MANUFACTURERS fault and their responsibility to sort out free of  charge.

KnC sent me UPS express shipping label to RMA 2 of my board a few weeks back and I received 100% working ASIC board in 3 business days 5,481 miles (8769 km) away (shipped Friday, received Wednesday).  So I am not really sure why you are all flustering over nothing?  You really have nothing better to do then to troll here about an imaginary problem that doesn't exist?

Exactly. Some would rather just cry, whine & moan than get off their duff to actually do something about it... but it's their choice... I say..... let them whine if their too lazy to have their Pick axe sharpened... They'll just mine less, and therefore get less....  which is exactly the price of laziness.

It's 3:39 AM in Hawaii right now. Are you such a sad git you sit in front of a computer day and night pressing F5 on this page? Do you even have a job, do you actually do anything? And you are describing other people as lazy. Maybe you should get a life and stop taking every opportunity to take pot-shots at people. Get away from your computer, maybe go out into the world you lame-o and do something with yourself, rather than keyboard-jockeying 24-7? You make yourself out to be some "man of action" here, when you just seem to be some saddo sitting at a computer 7 days a week, day and night.

He is the new Shillorama.

[FUKT]

I have NEVER paid a penny for a faulty item to be replaced or repaired, this is called a warranty and is the whole fucking point of one. To keep the customer happy because he has peace of mind that his product will always be available during the warranty period, I have never even paid postage. When it breaks under warranty that is THE VENDORS/ MANUFACTURERS fault and their responsibility to sort out free of  charge.

KnC sent me UPS express shipping label to RMA 2 of my board a few weeks back and I received 100% working ASIC board in 3 business days 5,481 miles (8769 km) away (shipped Friday, received Wednesday).  So I am not really sure why you are all flustering over nothing?  You really have nothing better to do then to troll here about an imaginary problem that doesn't exist?

Exactly. Some would rather just cry, whine & moan than get off their duff to actually do something about it... but it's their choice... I say..... let them whine if their too lazy to have their Pick axe sharpened... They'll just mine less, and therefore get less....  which is exactly the price of laziness.

It's 3:39 AM in Hawaii right now. Are you such a sad git you sit in front of a computer day and night pressing F5 on this page? Do you even have a job, do you actually do anything? And you are describing other people as lazy. Maybe you should get a life and stop taking every opportunity to take pot-shots at people. Get away from your computer, maybe go out into the world you lame-o and do something with your life, rather than keyboard-jockeying 24-7?

Actually, I'm an insomniac, and I'm up trading on the exchanges, taking advantage of the price drop...did great!....thanks for asking!   In- between trades, thought I'd get a peek in here ... glad I did. You are enough to wake me back up at 350am with a chuckle watching you utter the same old rhetoric over & over somehow thinking it's gonna help...thx!

"The longer they sit & whine about it, the more they short themselves for no reason. It's like self-inflicted punishment!..."

You are a funny guy. It seems like all your dicking about tweaking destroyed some boards on your first miners. If you were a regular customer, you'd be sitting looking at a bunch of expensive, dead hardware. What would the man of action do then?

But as you get special treatment, you get free boards to replace the ones you destroyed with your own stupidity. I bet you didn't even have to return the boards you destroyed, buttyrammer just mailed you the new ones. So that was a lot of action eh?

And the fact it took you 24 hours to hook your first saturn up to the internet still makes me laugh I doth my hat to your ongoing genius and value every comment you make.

LOL, I got my RMA two weeks ago, took two weeks of dicking about and they finally sent new board. Took two days to arrive then a week later two dies shutdown, didnt even bother emailing KNC just made a heap of calls to my solicitor. I'll let him sort it out.

[ImI]

hey orama,

i got one november jupiter that has 3 die disabled on one board. any advise??

I think we need to wait for the tuning suite, mines like this currently (657Gh/s):

Board 0 - 3 Cores off - All VRM fine
Board 2 - 3 Cores off - VRM 7 - FAULT 4
Board 3 - 3 Cores off - VRM 0,2,5,7 - FAULT 4
Board 4 - 2 Cores off - All VRM fine

yeah, i am lookin forward for the tuning-suite too

here it looks more like this

Board 0 - 3 dies off

so its running at 25%

how to look-up the VRMs??

Bertmod 0.4 http://forum.kncminer.com/forum/main-category/main-forum/20546-bertmod-0-4-unofficial-firmware-mod-feedback-thread

ah, didnt know that bertmod is capable of that

i will have a look

but nevertheless waiting for 0.99-e-tuning is all we can do i am afraid

[The Avenger]

hey orama,

i got one november jupiter that has 3 die disabled on one board. any advise??

I think we need to wait for the tuning suite, mines like this currently (657Gh/s):

Board 0 - 3 Cores off - All VRM fine
Board 2 - 3 Cores off - VRM 7 - FAULT 4
Board 3 - 3 Cores off - VRM 0,2,5,7 - FAULT 4
Board 4 - 2 Cores off - All VRM fine

yeah, i am lookin forward for the tuning-suite too

here it looks more like this

Board 0 - 3 dies off

so its running at 25%

how to look-up the VRMs??

Bertmod 0.4 http://forum.kncminer.com/forum/main-category/main-forum/20546-bertmod-0-4-unofficial-firmware-mod-feedback-thread

ah, didnt know that bertmod is capable of that

i will have a look

but nevertheless waiting for 0.99-e-tuning is all we can do i am afraid

Fault 4 is overheating. You keeping your miner sufficiently cooled?

Potentially turning it off for a few minutes, letting it cool down and restarting maybe enable everything again. By all reports, Nov jups like to be kept *very* cool.

[helmax]

we can put fans ? connect to board ?
or psu ?

anyone already put more fans or other way keep cool

[1l1l11ll1l]

Is it just me, or does the HashFast video show the assembly fail? Yeah, those don't go on there sideways.


http://www.youtube.com/watch?v=5rl6L8nt3Hc&feature=youtu.be

[DPoS]

Is it just me, or does the HashFast video show the assembly fail? Yeah, those don't go on there sideways.


http://www.youtube.com/watch?v=5rl6L8nt3Hc&feature=youtu.be

Margins upon margins...   didn't need that many caps anyway!!