Swedish ASIC miner company kncminer.com

[The Avenger]

It does now.

[wpgdeez]

Amazing what risks people are willing to take. How does this thing even get past customs? Who is responsible if a house burns down and someone dies? This should be reported to the gov.

[user27]

Amazing what risks people are willing to take. How does this thing even get past customs? Who is responsible if a house burns down and someone dies? This should be reported to the gov.

You are taking responsibility by connecting a PSU to it; that is why KfC don't ship with PSU.

[aasl]

anyone using Corsair RM850? Does it have overheating or auto-cutoff problem?

[raskul]

http://s27.postimg.org/n8zwxwkar/IMAG0384.jpg

mate. i know you well enough to know that you are not gonna burn in your bed. good luck with it.

[user27]

http://s27.postimg.org/n8zwxwkar/IMAG0384.jpg

mate. i know you well enough to know that you are not gonna burn in your bed. good luck with it.

It is a lot of PCI-e sockets to buy but (unlike KfC) I'm not going to skimp on a couple of $ to hook up a ten thousand dollar miner to power; that would be really stupid.

At this point ROI is so far away that $3 is not going to make a dent in it.

[smoothrunnings]

You can't tell from the outside.  It's the inside.  You have to know the specifications of that particular psu. Most higher end and high end psu will be single 12v rail.

So can i get some examples of 750 and 850 watt PSU's that are single rail?

Thanks,

will 750W PSU work?

Minimum requirement from KNC was 3 x 750W PSU's.

The price difference though from 750 to 800~850 is pretty insane. $75 to $150.

[samsonn25]

some cable like this are good:

http://www.shakmods.com/shop&&#!/~/product/category=3316088&id=37642162

[Winsome]

the ax1200I should be able to run the neptune without any special bootup procedures right?

Based on what Neptune users have reported thus far, you WILL need special bootup procedures for this PSU. See KnC's troubleshooting guide under the heading "PSU powers off when ASIC boards are connected".

If you haven't bought your PSU yet, get EVGA 1300W Supernova G2, good reports so far. Or Seasonic X-1250.
Or, 3 x Cooler Master V850.

[emu512]

Be careful with choosing psu,otherwise you will break your miner.Always try to get the recommended watt.

[samsonn25]

the ax1200I should be able to run the neptune without any special bootup procedures right?

Based on what Neptune users have reported thus far, you WILL need special bootup procedures for this PSU. See KnC's troubleshooting guide under the heading "PSU powers off when ASIC boards are connected".

If you haven't bought your PSU yet, get EVGA 1300W Supernova G2, good reports so far. Or Seasonic X-1250.

Im not an expert but maybe it has to do with initial power draw from the asic boards to the psu.   And every psu is not the same how they handle this initial load, which is different than a continuous load draw after everything is running.  It takes more load/torque/power etc  to start something than to keep it going.

[dairy100]

the ax1200I should be able to run the neptune without any special bootup procedures right?

Based on what Neptune users have reported thus far, you WILL need special bootup procedures for this PSU. See KnC's troubleshooting guide under the heading "PSU powers off when ASIC boards are connected".

If you haven't bought your PSU yet, get EVGA 1300W Supernova G2, good reports so far. Or Seasonic X-1250.

I understand what you mean

So what about 2 ax1200is for 4 neptune cubes and then run the controller and 5th cube off of another 800 or so watt PSU -- that would work without any special bootup procedures right?(i'm asking this because my friend has spare ax1200s)

[Phoenix1969]

couldn't resist...



Looks like I'm going to be fiddling with setting up a couple Neppies on Maui, and we have the ax1200's already, lol. Oh well.

[whisper]

Just ask for refund for my titan order and they say all sales are final... KNC become so lame company and tread customers as slaves ...

[jelin1984]

what diff per neptune


2048 diff
or more?

[johnyj]

What is the noise level measured at 3 ft ?

[kslavik]

I have 4 Neptune modules and a controller connected to the same PSU (EVGA NEX-1500)

The other neptune alreded melted CoolMax 1600w molexes with only 3 modules connected

[faetos]

This is a repost from kncforum, but they'll take it down soon. If you're still waiting on a refund I would do as this person says and contact these people:

Here is a link to Sweden's English newspaper. Anybody that is waiting for a refund please write to them so that this story gets out:

http://www.thelocal.se/page/view/contact

http://www.econsumer.gov/

You can also file a complaint with Swedish consumer watch dog

[email protected]

http://www.reddit.com/r/Bitcoin/comm...t_verket_over/

Anybody else that knows of any links or newspapers to get this story out and to see that we are refunded our money please lets us know.

[Winsome]

the ax1200I should be able to run the neptune without any special bootup procedures right?

Based on what Neptune users have reported thus far, you WILL need special bootup procedures for this PSU. See KnC's troubleshooting guide under the heading "PSU powers off when ASIC boards are connected".

If you haven't bought your PSU yet, get EVGA 1300W Supernova G2, good reports so far. Or Seasonic X-1250.
Or, 3 x Cooler Master V850.

I understand what you mean

So what about 2 ax1200is for 4 neptune cubes and then run the controller and 5th cube off of another 800 or so watt PSU -- that would work without any special bootup procedures right?(i'm asking this because my friend has spare ax1200s)

I don't know if this will work or not. The thing is, the ax1200 just doesn't like to zoom from 0-1000W in a few seconds (or else it shuts off).

[samsonn25]

Are the neptunes hot swappable to/from the controller.  Plunging them in separately might solve the overload spike problem with the ax1200i