WinMiner v1.126a - auto switch windows app for multi miner optimization

[eclark5483]

Hmm, NICE, if only it were permanent.

Couple of unaccounted for RX 560s, and a couple 1050's in the mix, but still nice profitability.

https://s18.postimg.cc/foiageet5/Image3.jpg

EDIT: I undervolt my cards and overclock memory for best efficiency. If I didn't, profitability is a bit higher, but my rigs are more prone to crash with heat. Very stable at 80% with memory overclocks, would rather be stable than peak. Keeps rigs cheaper. 1050/1030 rig is going solar soon. Total watt use is under 250, using passive cooled gt 1030's.

[Brexei]

Can you post a picture of the daily earning graph? (just zoom in a day until details appear in the statistics page) Mine is fluctuating a lot during the day and i am wondering if my cards run stable or not...

[eclark5483]

Here's one of my GTX 1060

https://s18.postimg.cc/4eguddm8p/gtx1060.jpg

[Brexei]

OK, it looks like mine, but maybe a tiny bit more stable.
However, i just noticed that one of my two computers is not producing a stable output in some days... Maybe i should decrease frequencies a bit.
Do you run winminer in full benchmark mode or in automatic mode? Which one is better overall?
Thanks

[eclark5483]

I've tried all 3 way. don't see any difference at all except for frequency of benchmarks. I think auto works well, just sometimes it won't switch to a more profitable coin on 1 rig when others have because it doesn't have a benchmark data to know it's more profitable. I'll usually manually select the more profitable coin, run it for a minute, then switch back to all coins and the now more profitable one shows up.. Of course, coin chasing works best when you have multiple rigs, time on your hands to kill and monitor mining, and luck.

[cryptodunno]

cannot create an account on the website, it`s freezing
I`ve entered email/password and it`s just keep processing and nothing happens after i push create button...

[pbuva]

Is consumption calculated to profitability switch?

[mouselytrap]

Anyone having issues with mining ETH? In the last 12 hours my ETH mining keep getting restarted or 0 MHh/s. Then it switches to other coins.

[cryptodunno]

Anyone having issues with mining ETH? In the last 12 hours my ETH mining keep getting restarted or 0 MHh/s. Then it switches to other coins.

if you run GTX 1063 the DAG file is too big to mine ETH, that might be the reason

[mouselytrap]

Anyone having issues with mining ETH? In the last 12 hours my ETH mining keep getting restarted or 0 MHh/s. Then it switches to other coins.

if you run GTX 1063 the DAG file is too big to mine ETH, that might be the reason

Sorry, my mistake. I should hv said I'm using AMD. But it's solved now. I revert back to AMD 18.3.4 driver and everything is smooth now. I updated a few things, including driver 18.4.1 and I kept getting problems in mining ETH. Anyway, it's solved using 18.3.4 driver. Thanks anyway.

[Brexei]

I am lately having issues with one of my cards (R9 270) displaying zero earnings in the daily graph for one or more 10-minute intervals. It might run for a day and then there are some gaps (zero profit). I have reverted the frequencies back to default, rebooted and even cleared the benchmark data, but it appears again and again.

I have submitted a report and wait for the answer....

Also, i noticed that it switches to GBX coin for no reason, reporting a false high price for 5 minutes and then it drops back to normal, so it changes back to ubq or xmr. This happens a lot of times during the day. Can you please fix these erroneous changes? Maybe increase the time that a coin has to sell high in order to be selected in winminer?

Thanks a lot.

[TeamWinMiner]

I have submitted a report and wait for the answer....

Support is on it 

[cryptodunno]

cannot create an account on the website, it`s freezing
I`ve entered email/password and it`s just keep processing and nothing happens after i push create button...

somehow get through registration and validated my account.
but when Im trying to log in in winwiner it says that record is not found.
maybe it`s a sign to stay away?))

[TeamWinMiner]

...when Im trying to log in in winwiner it says that record is not found.

Please reach out to support[at]winminer[.]com and let them know the email address you registered with (a screen shot of the error message you are getting would be great too) - they will gladly help.

[psemeraro]

Hi, Thanks for creating this platform!       Having multiple errors with "xmr stak has been blocked" then winminer just quits and cannot be relaunched only a restart brings it back.   Everything works great for hours then it just stops...  Shouldn't software either work correctly or not work at all?  How does it just quit midstream??  I have submitted help requests with logs.  Hope it can be fixed soon!     Thanks    Pat

[TeamWinMiner]

Hi, Thanks for creating this platform!       Having multiple errors with "xmr stak has been blocked" then winminer just quits and cannot be relaunched only a restart brings it back.   Everything works great for hours then it just stops...  Shouldn't software either work correctly or not work at all?  How does it just quit midstream??  I have submitted help requests with logs.  Hope it can be fixed soon!     Thanks    Pat

We will definitely look into this and get back to you.
Since you mentioned a "blocked"  error message - are you sure you have made an exclude rule for WinMiner (both for the program files  and appdata folders of WinMiner)?

[psemeraro]

are you sure you have made an exclude rule for WinMiner (both for the program files  and appdata folders of WinMiner)?

Support was fast, thank you!  Yes appdata folder has exclusion.  Followed support instructions and uninstalled/reinstalled AMD drivers.  Uninstall actually kept freezing, had to use the AMD cleanup utility so probably something was corrupted somewhere and only showed up randomly.  System is back online, hopefully its reliable.  The four other rigs are working trouble free.      Pat

[mouselytrap]

For those who are updating to Win 10 1803 and using AMD's latest driver 18.4.1 and having issues mining (especially ETH), I have a workaround. Either use previous drivers or after updating to latest driver, go to Device Manager and disable/enable your GPU. It works wonder for me. Now latest driver 18.4.1 works and it seems it's slightly faster (around 4%) with same wattage for me. Of course that 4% could be just margin of error. 

[Brexei]

I am lately having big issues with my earnings. If i look in the 12 hour graphs both my pcs seem to have gaps (zero earnings for 1-2 or more hours) or very low earnings (5 times lower than normal). Does anyone else have this issue?
Facts:

1. Both systems were unchanged. They were working nicely in the past.
2. This is not an overclocking issue. I have reduced the frequencies to stock and the problem remains.
3. i disabled GBX mining just in case...
4. Both pcs run stable with windows 7.
5. The miner window seems to run for 10-20 minutes, then closes and starts again. I suppose this is not an issue because it was happening in the past.
6. I have 2 R9 270 cards. No issues with power supply etc.
7. In one of my pcs i reinstalled the AMD driver and it fixed the problem for a few days, but then... it appeared again! And now it cannot be fixed. I also installed windows again, latest drivers etc... and the problem is worse!!

Could this be an issue with the latest Adrenaline drivers? Or an issue with winminer application not working for some time?
I have submitted error reports and hope to find out something.
If anyone has an idea please help!
Thank you.

EDIT:
I think i have an idea what the problem might be. Yesterday Winminer was running fine on both pcs, but in the online dashboard one of the pcs was completely offline!!! I double checked that winminer is running fine and it was! So, i quit and restarted it and... it appeared online again! So, it might be a server problem not registering my cards or a miner issue crashing and not coming back online properly. Who knows....
I am making half of what i used to make a few days ago!

[eclark5483]

I have 2 rx 560's in 2 different machines, same drivers. 1 card refuses to mine sumo.