[ANN] profit switching auto-exchanging pool - www.middlecoin.com

[Pfool]

Hey guys, here is the new tool I've developped to check the stats of all of my mining addresses on middlecoin. Just enter your addresses (one line by address) and let's go.

http://stratehm.net

BTW: it would be nice if you would also add "Total:" for BTC and Hash graph/data; I know that a Total BTC (immature+unexchanged+balance) is only aproximate, but it would still be nice to see a value and line for that, too.

Will be added in the next release.

[bigblind]

I'm getting many GF errors.... can anybody tell me how i solve them or maybe at least why they tend to happen?

[jedimstr]

I'm getting many GF errors.... can anybody tell me how i solve them or maybe at least why they tend to happen?

Get a new GF?  There's no way to solve them... they all come like that.  Only way to fix it is marry them or get a new one.

[bigblind]

I'm getting many GF errors.... can anybody tell me how i solve them or maybe at least why they tend to happen?

Get a new GF?  There's no way to solve them... they all come like that.  Only way to fix it is marry them or get a new one.

Hahahaha
I just quitted, so im free for mining!!

No joke aside...... i quit for real..... ............


HONESTLY, how can i solve them? Is it because im running that rig on wifi? Or may it at least be a reason (higher latency)

[bigblind]

I'm getting many GF errors.... can anybody tell me how i solve them or maybe at least why they tend to happen?

Get a new GF?  There's no way to solve them... they all come like that.  Only way to fix it is marry them or get a new one.

Hahahaha
I just quitted, so im free for mining!!

No joke aside...... i quit for real..... ............


HONESTLY, how can i solve them? Is it because im running that rig on wifi? Or may it at least be a reason (higher latency)

Ok... it just seems the eu server isnt running properly. I'm getting disconnects and lost shares. Switched to useast and seems to be better..

[sgsdebruijn]

No problems with EU, no GW's, Rejects etc with 2 rigs no errors at all

[Shaban]

can you post a screenshot of cgminer?
do you monitor your hashrate at middlecoin or on the rigs?
try mining on a new adress from this rig only

Still at work, so nothing has changed on my rigs, yet now my hashrate is above 6.1mh/s again with 3% rejects. Has to be server side...

the rigs and the server are not the only variables in play. network connection also has some part in it.
you don't really have to change anything for the things to go wrong and yes it might be server side, but when you see too many rejects you should also check other users' rejects to see if there is a server problem. if you don't find anybody in similar situation - it most likely is not server side issue
for example a couple of days a go one of my 280x was constantly shutting down when it get's to it's regular kh... no matter what i do through teamviewer... at the end there was an issue with one of the 12V cables and the card was not getting enough power and it worked for a month without me changing anything

Well, I'm not sure, now I'm getting less than 1% rejects and my hashrate is 7.0278 Mh/s - and I still haven't changed anything since I'm still at work.

[jam3zs]

Why might 1 of my cards be rejecting more than the others?
No HW errors, no GF or RF.

[sykal]

Why might 1 of my cards be rejecting more than the others?
No HW errors, no GF or RF.

You are running a much higher intensity on that card, causing higher temps.
probably too high.

[jam3zs]

Why might 1 of my cards be rejecting more than the others?
No HW errors, no GF or RF.

You are running a much higher intensity on that card, causing higher temps.
probably too high.

Yeah the other cards are 280x's

That one is a 290 so 83c for that card is actually pretty cool.

I probably should have mentioned this in the previous post lol.

[sgsdebruijn]

Why might 1 of my cards be rejecting more than the others?
No HW errors, no GF or RF.

You are running a much higher intensity on that card, causing higher temps.
probably too high.

Yeah the other cards are 280x's

That one is a 290 so 83c for that card is actually pretty cool.

I probably should have mentioned this in the previous post lol.

Yep, try a lower intensity, play with TC

[Anubite]

You could also try setting custom intensities for each card, separated by commas (-I 13,13,19,20). You can also use commas on other settings. I don't know the max temp of 280s, but I do know 290s cards can take up to 94c and be ok (I keep mine at 85-88).

edited

[jam3zs]

You could also try setting custom intensities for each card, separated by commas (-I 13,13,19,20). You can also use commas on other settings. I don't know the max temp of most of yours, but I do know r9 cards can take up to 94c and be ok (I keep mine at 85-88).

Intensities are already separated by commas

Cheers guys, I may have a play around when I have some time then.

[Anubite]

You could also try setting custom intensities for each card, separated by commas (-I 13,13,19,20). You can also use commas on other settings. I don't know the max temp of most of yours, but I do know r9 cards can take up to 94c and be ok (I keep mine at 85-88).

Intensities are already separated by commas

Cheers guys, I may have a play around when I have some time then.

One last suggestion, make sure the clocks are stable and not fluctuating a bit. Low watts can cause errors. I turn my 290x power limit to +10 when mining, and get as low as .5% rejected on some pools.

[jam3zs]

You could also try setting custom intensities for each card, separated by commas (-I 13,13,19,20). You can also use commas on other settings. I don't know the max temp of most of yours, but I do know r9 cards can take up to 94c and be ok (I keep mine at 85-88).

Intensities are already separated by commas

Cheers guys, I may have a play around when I have some time then.

One last suggestion, make sure the clocks are stable and not fluctuating a bit. Low watts can cause errors. I turn my 290x power limit to +10 when mining, and get as low as .5% rejected on some pools.

interesting, I know the 290 core speed does fluctuate ever so slightly, this is actually a common issue with these cards and it causes the card to drop off of bamt's ui. A friend of mine actually posted a fix for it.

what do you mean by power limit +10? is that a parameter in the config?

[dgross0818]

Probably means PowerTune +10 instead of +20 (I think)

290's are a little weird to configure... one of my XFX's won't run on anything other than 947 (stock clock) lol... It also drops off BAMT 1.2 every once in a while, however, it doesn't affect shares so I don't really care.

[jam3zs]

Probably means PowerTune +10 instead of +20 (I think)

290's are a little weird to configure... one of my XFX's won't run on anything other than 947 (stock clock) lol... It also drops off BAMT 1.2 every once in a while, however, it doesn't affect shares so I don't really care.

well if you get bored and fancy fixing it, this is how to:

https://bitbucket.org/beebee/bamt/issue/2/gpus-drop-off-gpumon-and-web-interface

TLDR: you need to edit /opt/bamt/common.pl (search for "regex"). Replace part of the regular expression that reads (\d)MHz with (.)MHz

[BeeFer310]

Probably means PowerTune +10 instead of +20 (I think)

290's are a little weird to configure... one of my XFX's won't run on anything other than 947 (stock clock) lol... It also drops off BAMT 1.2 every once in a while, however, it doesn't affect shares so I don't really care.

this sounds like an issue i had with bamt and my 290s
https://litecointalk.org/index.php?topic=2924.msg76025#msg76025 helped me with this.

sry 4 OT

EDIT:

[willittobe]

Interesting... A single rig (all rigs on same server and same address) was just on a different coin from all the rest for a while. Appears to be lottocoin, actually it just switched back to it again, while the rest are all doge'n it.

[pitobread]

So I have something interesting I found today.

Here is my hashrate.

http://www.middlecoin.com/reports/1D8D29KxcmPqHsmiypHcEdCc5HqnjYgat.html  <there was a small dip when i moved my machines and one went down last night for a few hours.

Here are 3 other users with a same overall hashrate

http://www.middlecoin.com/reports/1UYijXkzZh4qqQKUkHPeRfbELF3XKmWye.html  <<< very close rate and he makes double what I make

http://www.middlecoin.com/reports/1B2cs9cyAcmNKPjoGdGNUL92FToKSUQaXc.html <<< This guy has the same rate as me, I have been watching it all day and he is making almost double what I am in a day

http://www.middlecoin.com/reports/1D8D29KxcmPqHsmiypHcEdCc5HqnjYgat.html   <<< This one is lower at first but gets higher at the end.. but notice how the earlier payments are similar to mine with double the rate.

I have very few rejects, my pings are 25-35ms, my machines run 24/7.  No odd messages on my screen when running and I have ran it on litecoin/wdc/doge/etc before with no issues.  Why are they making way more than me?  Seems the sharing part of the pool needs tweaking if we are all mining the same and yet I barely make what someone with half the power is making?

edit: I don't have no submit stale