avidwriter
Newbie
Offline
Activity: 45
Merit: 0
|
 |
February 15, 2014, 08:05:36 PM |
|
guys,
I want to back at multipools, found 3 (middlecoin, hashcows, altcoinplex)
May you share please your experience with them to see which one is better.
Try pool.trademybit.com - hyperactive dev and lot of nice (but also bit confusing) stats and decent payout. I´ve got half of HR here and half there and profits seems to be equal - with bit difference on both sides. Avoid HashCows, because they are somehow broken with more than 30% less payout since christmass hack (IMHO they stealing from users to cover loses, but its pure speculation). I've experienced the same on hashcows. they actually had higher returns than middlecoin for me before the hack, not sure why they started messing with their algo it was fine.
|
|
|
|
|
cokeman0
Newbie
Offline
Activity: 51
Merit: 0
|
 |
February 15, 2014, 08:11:01 PM |
|
guys,
I want to back at multipools, found 3 (middlecoin, hashcows, altcoinplex)
May you share please your experience with them to see which one is better.
Try pool.trademybit.com - hyperactive dev and lot of nice (but also bit confusing) stats and decent payout. I´ve got half of HR here and half there and profits seems to be equal - with bit difference on both sides. Avoid HashCows, because they are somehow broken with more than 30% less payout since christmass hack (IMHO they stealing from users to cover loses, but its pure speculation). I've experienced the same on hashcows. they actually had higher returns than middlecoin for me before the hack, not sure why they started messing with their algo it was fine. I'm on clevermining.com, with mc as fail-over, looks like clevermining is dooing a better job then MC, but most days the are about the same. just more and better stats at clevermining.com, than mc
|
|
|
|
|
MikkaMK
Newbie
Offline
Activity: 9
Merit: 0
|
 |
February 15, 2014, 08:45:58 PM |
|
Having very high reject rates with new rig running 2x r9 290 tri-x runni sgminer and 13.11 beta drivers. Bat file as follows
sgminer -o stratum+tcp://middlecoin.com:3333 -xxxx-p x -I 23 -w 256 --thread-concurrency 32765 --gpu-engine 1020 --gpu-memclock 1500 --gpu-fan 85 --temp-target 88 --temp-overheat 92 --temp-cutoff 98 --gpu-powertune 20
Can't get these cards running with cgminer at all.
Any suggestions?
"-I" is too high. Start with 18/19/20. Check the hahsrate/rejects/WU and settle for the best values (depends also on what server you're hashing). GPU and memclock might be too high as well. safer settings are 947/1250 or 975/1350 or 987/1425. Let it run a while (day or two), see if anything goes sick/dead/off. Have a good PSU? I have 4xr9 290 cards running those setting stable and no issues, strange these cards don't like it. Tried intensity lower keep getting display adapter failed message it runs perfectly for 10 mins thn get the error. Psi is good antec 850w.
|
|
|
|
|
|
CoinBuzz
|
 |
February 15, 2014, 08:41:16 PM |
|
I want to know about altcoinplex.com, i found out here. Just wondering if their intelligent hash distribution system can make more profit from super-fast and small coins?
|
|
|
|
ckoeber
Member

Offline
Activity: 182
Merit: 10
|
 |
February 15, 2014, 09:00:43 PM |
|
|
|
|
|
|
ckoeber
Member

Offline
Activity: 182
Merit: 10
|
 |
February 15, 2014, 09:01:32 PM |
|
guys,
I want to back at multipools, found 3 (middlecoin, hashcows, altcoinplex)
May you share please your experience with them to see which one is better.
For me middlecoin is the highest paying overall.
|
|
|
|
|
|
|
ndevices
Newbie
Offline
Activity: 58
Merit: 0
|
 |
February 15, 2014, 09:02:50 PM |
|
i have 30% reject shares 
|
|
|
|
|
michwill
Newbie
Offline
Activity: 54
Merit: 0
|
 |
February 15, 2014, 09:16:59 PM |
|
Fortunately, MAX is profit switching pool resistant. Not only is it NOT scrypt (it's SHA-3), but the hurdles to get the customized CGminer working are high. You have to compile your own miner version and then you have to tweak your command line settings as you won't be able to use the same overlock/memclock/Intensity/etc... settings for SHA-3 coins that you can for scrypt.
Not to mention that if somehow Middlecoin was able to begin mining for MAX it would kill the market immediately thus making it non-profitable.
I love coins like this that can't be taken advantage of by the profit switchers. If you want to mine it, do you own research and mine it yourself.
From my experience, mining that one needs the same parameters as scrypt, but intensity=9 instead of 13
|
|
|
|
|
|
shango
|
 |
February 15, 2014, 09:30:46 PM |
|
Stats are definately stuck
|
|
|
|
DannyAves
Newbie
Offline
Activity: 17
Merit: 0
|
 |
February 15, 2014, 09:31:14 PM |
|
Having very high reject rates with new rig running 2x r9 290 tri-x runni sgminer and 13.11 beta drivers. Bat file as follows
sgminer -o stratum+tcp://middlecoin.com:3333 -xxxx-p x -I 23 -w 256 --thread-concurrency 32765 --gpu-engine 1020 --gpu-memclock 1500 --gpu-fan 85 --temp-target 88 --temp-overheat 92 --temp-cutoff 98 --gpu-powertune 20
Can't get these cards running with cgminer at all.
Any suggestions?
"-I" is too high. Start with 18/19/20. Check the hahsrate/rejects/WU and settle for the best values (depends also on what server you're hashing). GPU and memclock might be too high as well. safer settings are 947/1250 or 975/1350 or 987/1425. Let it run a while (day or two), see if anything goes sick/dead/off. Have a good PSU? I have 4xr9 290 cards running those setting stable and no issues, strange these cards don't like it. Tried intensity lower keep getting display adapter failed message it runs perfectly for 10 mins thn get the error. Psi is good antec 850w. I am no expert but I would think to run 4xr9 290 you need at least 1200w, preferably 1300w.
|
|
|
|
|
planeswalker
Newbie
Offline
Activity: 19
Merit: 0
|
 |
February 15, 2014, 09:48:03 PM |
|
Any plans on lowering the worker difficulty back to 512? I believe its still at 1024.
|
|
|
|
|
|
shango
|
 |
February 15, 2014, 09:55:15 PM |
|
Having very high reject rates with new rig running 2x r9 290 tri-x runni sgminer and 13.11 beta drivers. Bat file as follows
sgminer -o stratum+tcp://middlecoin.com:3333 -xxxx-p x -I 23 -w 256 --thread-concurrency 32765 --gpu-engine 1020 --gpu-memclock 1500 --gpu-fan 85 --temp-target 88 --temp-overheat 92 --temp-cutoff 98 --gpu-powertune 20
Can't get these cards running with cgminer at all.
Any suggestions?
"-I" is too high. Start with 18/19/20. Check the hahsrate/rejects/WU and settle for the best values (depends also on what server you're hashing). GPU and memclock might be too high as well. safer settings are 947/1250 or 975/1350 or 987/1425. Let it run a while (day or two), see if anything goes sick/dead/off. Have a good PSU? I have 4xr9 290 cards running those setting stable and no issues, strange these cards don't like it. Tried intensity lower keep getting display adapter failed message it runs perfectly for 10 mins thn get the error. Psi is good antec 850w. I am no expert but I would think to run 4xr9 290 you need at least 1200w, preferably 1300w. Gold standard minimum, go platinum it is worth the extra investment for security and piece of mind.
|
|
|
|
superminer
Newbie
Offline
Activity: 7
Merit: 0
|
 |
February 15, 2014, 10:25:49 PM |
|
Think this will be a realy bad day @ middlecoin
|
|
|
|
|
|
shango
|
 |
February 15, 2014, 10:30:44 PM |
|
Think this will be a realy bad day @ middlecoin
Well we don't know, because stats are stuck I have however an unusual high amount of rejects (10% for the past 2 hours)
|
|
|
|
mrhan
Newbie
Offline
Activity: 3
Merit: 0
|
 |
February 15, 2014, 10:34:10 PM |
|
Having very high reject rates with new rig running 2x r9 290 tri-x runni sgminer and 13.11 beta drivers. Bat file as follows
sgminer -o stratum+tcp://middlecoin.com:3333 -xxxx-p x -I 23 -w 256 --thread-concurrency 32765 --gpu-engine 1020 --gpu-memclock 1500 --gpu-fan 85 --temp-target 88 --temp-overheat 92 --temp-cutoff 98 --gpu-powertune 20
Can't get these cards running with cgminer at all.
Any suggestions?
"-I" is too high. Start with 18/19/20. Check the hahsrate/rejects/WU and settle for the best values (depends also on what server you're hashing). GPU and memclock might be too high as well. safer settings are 947/1250 or 975/1350 or 987/1425. Let it run a while (day or two), see if anything goes sick/dead/off. Have a good PSU? I have 4xr9 290 cards running those setting stable and no issues, strange these cards don't like it. Tried intensity lower keep getting display adapter failed message it runs perfectly for 10 mins thn get the error. Psi is good antec 850w. I am no expert but I would think to run 4xr9 290 you need at least 1200w, preferably 1300w. Gold standard minimum, go platinum it is worth the extra investment for security and piece of mind. You could try to use ather bios to lower your watt, but you still need at least 1200W PSU. https://litecointalk.org/index.php?topic=12830.0 to get better bios for 290, 290x I am running 840KH at 250W with R9290, stock is 870KH at 300W. 840KH is with i=18, and 2% rejects.
|
|
|
|
|
|
g0re79
|
 |
February 15, 2014, 10:36:29 PM |
|
Think this will be a realy bad day @ middlecoin
Well we don't know, because stats are stuck I have however an unusual high amount of rejects (10% for the past 2 hours) Congrats sir, Youve just run into a trolls trap 
|
|
|
|
|
shango
|
 |
February 15, 2014, 10:45:33 PM |
|
Think this will be a realy bad day @ middlecoin
Well we don't know, because stats are stuck I have however an unusual high amount of rejects (10% for the past 2 hours) Congrats sir, Youve just run into a trolls trap  oh...
|
|
|
|
|
Quenouille79
|
 |
February 15, 2014, 10:50:26 PM |
|
Think this will be a realy bad day @ middlecoin
neeewwwbie! lol
|
|
|
|
|
g0re79
|
 |
February 15, 2014, 11:05:04 PM |
|
Think this will be a realy bad day @ middlecoin
neeewwwbie! lol more like "troooliieee" to me
|
|
|
|
|