HashFast announces specs for new ASIC: 400GH/s

[jjiimm_64]

On that note, were Hashfast's books ever reconciled properly?  Why is it that I remember it not being so and there being still many bitcoins unaccounted for? 

I know of at least one bitcoin addy that has about 3000 btc in it... it has been sitting there since early Sept 2013.  it was only 2 steps away from the address I paid into 210 btc

You can bet there is bitcoins stashed!!!!!!!

[Gleb Gamow]

Now, if BFL was really in the bed with HF, as speculated since the beginning of this nightmare... And they arrested three of BFL's managers... And they start to know, talk...

HashTrade and LiquidBits may have been the connection.

[cedivad]

I know of at least one bitcoin addy that has about 3000 btc in it... it has been sitting there since early Sept 2013.  it was only 2 steps away from the address I paid into 210 btc

You can bet there is bitcoins stashed!!!!!!!

Barber always said that it was used to pay a supplier. I never got to know the name of the supplier.

[mikelitv]

Now, if BFL was really in the bed with HF, as speculated since the beginning of this nightmare... And they arrested three of BFL's managers... And they start to know, talk...

HashTrade and LiquidBits may have been the connection.

They are miners/cloudminers.  They buy equipment from everyone.  BFL, HF (or TRIED to buy in this case), KnC, Cointerra, Antminer etc...  So I guess you could say there is a link right there.

[mikelitv]

I know of at least one bitcoin addy that has about 3000 btc in it... it has been sitting there since early Sept 2013.  it was only 2 steps away from the address I paid into 210 btc

You can bet there is bitcoins stashed!!!!!!!

Barber always said that it was used to pay a supplier. I never got to know the name of the supplier.

Ah!  If Barber said so, then it MUST be true!!!!!

;-)

[cedivad]

Ah!  If Barber said so, then it MUST be true!!!!! ;-)

Absolutely. No one would ever lie in an email where a customer asks where his payment went. It would be dumb stupid. You just don't answer to that question if you need to cover it.

[Micky25]

I know of at least one bitcoin addy that has about 3000 btc in it... it has been sitting there since early Sept 2013.  it was only 2 steps away from the address I paid into 210 btc

You can bet there is bitcoins stashed!!!!!!!

Barber always said that it was used to pay a supplier. I never got to know the name of the supplier.

I suppose it was the weed supplier, though I don't have a name too.

[Micky25]

I just realize, that this (ancient and original) picture looks photoshopped.. plot twist?

[cedivad]

I suppose it was the weed supplier, though I don't have a name too.

Thanks for the laugh. Again, what the hell is in that picture? I've yet to understand it. Because they told us it was a wafer. What's the size of a wafer of the tsmc 28nm process HF used? 450mm? I find online that tsmc is doing mostly 450mm wafers. If someone wanted to make the math, we know that each wafer makes 196 GN chips... So 196*4 dies... If you knew the size of the die, you could know the size of the wafer HF used...

Because if it was a 450mm one, it would be as big as this one here:



How the hell is a 450mm wafer supposed to fit in Edward's hands there?

[Micky25]

Remember this one?



We can now speculate further on the contents of that conversation…

Lets go to the bathroom and take some lines. This plate looks perfect.


A couple of days later:

[cedivad]

cut out

Now, that looks like a 300mm one. It's stil far from fitting in the smashed torner chardrige thing Edward is holding imho. (avalon, older process, smaller wafers).

[MrTeal]

I suppose it was the weed supplier, though I don't have a name too.

Thanks for the laugh. Again, what the hell is in that picture? I've yet to understand it. Because they told us it was a wafer. What's the size of a wafer of the tsmc 28nm process HF used? 450mm? I find online that tsmc is doing mostly 450mm wafers. If someone wanted to make the math, we know that each wafer makes 196 GN chips... So 196*4 dies... If you knew the size of the die, you could know the size of the wafer HF used...

Because if it was a 450mm one, it would be as big as this one here:

How the hell is a 450mm wafer supposed to fit in Edward's hands there?

Where did you find that? Most of TMSC's 28nm lines are 300mm, the rest are 200mm. Last summer they were talking about 450mm being ready 2016-2017
http://www.brightsideofnews.com/2013/06/03/tsmc-future-revealed-450mm-wafers2c-16107nm-finfet2c-cowos-more/

[cedivad]

Where did you find that? Most of TMSC's 28nm lines are 300mm, the rest are 200mm. Last summer they were talking about 450mm being ready 2016-2017
http://www.brightsideofnews.com/2013/06/03/tsmc-future-revealed-450mm-wafers2c-16107nm-finfet2c-cowos-more/

Ok, then a 300mm wafer could fit in there. My bad. How tall is edward? Let's work out the size of that thing!

http://hashfast.com/category/golden-nonce-asic/
^^ is that the size of the die or of the substrate?

[Ilan1]

Is there any new news on the consolididation?
I am starting to doubt whether I will ever see any money back.
Right now I would be happy with 30-50% back if this court case ever ends!

I have been since looking at new investments and have come across LTCgear.com they are a Scrypt cloud mining service and you can ROI within 5 weeks, I was sceptical at first but I already received my first payment last Friday and I am expecting another one today. (They pay every week) check them out here http://ltcgear.com/?apage=120

"We will discount all our shares products  for 49% – use coupon “anniversary1yr” during checkout"

[cedivad]

If there is something I'm happy with after this ScrewFast experience, is that I have incredibly widen the detection range of my scam scanner. And hell, that things rings all the bells. Good luck referring people!

[BenTuras]

Is there any new news on the consolididation?
I am starting to doubt whether I will ever see any money back.
Right now I would be happy with 30-50% back if this court case ever ends!

I have been since looking at new investments and have come across LTCgear.com they are a Scrypt cloud mining service and you can ROI within 5 weeks, I was sceptical at first but I already received my first payment last Friday and I am expecting another one today. (They pay every week) check them out here http://ltcgear.com/?apage=120

"We will discount all our shares products  for 49% – use coupon “anniversary1yr” during checkout"

ROI of 5 weeks ... if it sounds too good to be true, ...

[Ilan1]

Is there any new news on the consolididation?
I am starting to doubt whether I will ever see any money back.
Right now I would be happy with 30-50% back if this court case ever ends!

I have been since looking at new investments and have come across LTCgear.com they are a Scrypt cloud mining service and you can ROI within 5 weeks, I was sceptical at first but I already received my first payment last Friday and I am expecting another one today. (They pay every week) check them out here http://ltcgear.com/?apage=120

"We will discount all our shares products  for 49% – use coupon “anniversary1yr” during checkout"

ROI of 5 weeks ... if it sounds too good to be true, ...

I know, that's what I thought too, but I figured what the hell, I received a1.2BTC payout last Friday and I am expecting a bigger payout today, (they multiply shares every 6 weeks to keep up with raising difficulty, the last multiplication was for 1.35 x) I received 1680 shares for free. I know it sounds too good to be true but these guys have been around for over a year, and there is a lot of positive talk about the company and Chris in general. Anyway I just wanted to spread the word, if you do decide to give it a try I would be very gretfull if you do so via my affiliate link. And remember never invest more than you can afford to lose!!

[cedivad]

http://en.wikipedia.org/wiki/Ponzi_scheme

"just spread the world", via a referring link.

[Ilan1]

http://en.wikipedia.org/wiki/Ponzi_scheme

"just spread the world", via a referring link.

You may well be right, but so far I have 1/4 of my investment back, a lot of people on various chat forums are saying positive things about Chris and his FPGA developments and recent advances in Cloud Mining. I was therefore willing to take the risk on a 1600 M/hs package for $850 ... It may turn out to be a scam but so far so good. anyway just wanted to let a few people know about it as it may offset some off if the Scamfast losses which is what I am trying to do. 😄

I am not trying to hide the fact that I am an affiliate and if you want to throw a few $ my way for referring the site to you, that is purely up to you. No pressure just letting people know about it. You can make your own minds up about them. I gave it a shot anyway.

[cedivad]

Sure, you might as well get out before the scheme collapses.