|
Keefe
|
 |
December 01, 2013, 09:43:48 AM |
|
2) modify the miner.h file. to do this, SSH in and type:
"cd /opt/bitfury/chainminer
sudo pico miner.h"
and then modify:
max_error : from 5 to 6 (increases tolerance to errors slightly)
min_good : from 50 to 40 (increases tolerance to low-performance slightly)
max_speed : from 57 to 55
def_speed : from 55 to 53
min_speed : 52
[these options help prevent the system from switching chips off if they are borderline working]
Don't forget to recompile chainminer after editing miner.h or nothing will change. Just running 'make' should do that. Do I need to be in a particular directory when I run "make"? Yes: /opt/bitfury/chainminer And you don't need to use sudo when working in that directory, as those files (miner.h, etc) are owned by user pi, not root. |
|
|
|
john_es
Newbie
 Offline
Activity: 12
Merit: 0
|
|
December 01, 2013, 06:20:29 PM |
|
OK, so I have this... which is great... 1.) Although the nrate was 60, btcguild shows only 40. Any idea for that? 18 AIfDSo 49 2.176 1.913 152 0 0 0 0 181 [1:1] 618 9 9 9 9 10 10 10 10 10 10 10 10 9 9 9 9 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
19 AIfDSo 49 1.761 1.871 123 0 0 0 0 177 [1:2] 639 7 8 8 8 8 8 8 8 8 8 8 8 7 7 7 7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
20 AIfDSo 49 1.618 1.860 113 0 0 0 0 176 [1:3] 651 8 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
21 AIfDSo 49 1.904 1.860 133 0 0 0 0 176 [1:4] 632 9 9 9 9 8 8 8 8 8 8 8 8 8 8 8 9 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
22 AIfDSo 49 2.004 1.871 140 0 0 0 0 177 [1:5] 622 8 9 9 9 9 9 9 9 9 9 9 9 9 8 8 8 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
23 AIfDSo 49 1.861 1.829 130 0 0 0 0 173 [1:6] 631 8 8 8 8 8 8 8 8 8 8 9 9 8 8 8 8 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
24 AIfDSo 49 2.090 1.903 146 1 0 0 0 180 [1:7] 621 9 9 9 9 9 9 9 9 9 9 9 10 10 9 9 9 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0
25 AIfDSo 49 1.761 1.945 123 0 0 0 0 184 [1:8] 640 7 7 8 8 8 8 8 8 8 8 8 8 8 7 7 7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
26 AIfDSo 49 1.875 1.850 131 0 0 0 0 175 [1:9] 641 8 8 8 8 8 8 8 8 8 8 8 8 8 9 9 9 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
27 AIfDSo 49 1.833 1.892 128 0 0 0 0 179 [1:A] 636 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
28 AIfDSo 49 1.890 1.998 132 1 1 0 0 189 [1:B] 631 8 9 9 9 9 9 7 8 8 8 8 8 8 8 8 8 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0
29 AIfDSo 49 1.833 1.955 128 0 0 0 0 185 [1:C] 639 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
30 AIfDSo 49 1.947 1.913 136 4 0 0 0 181 [1:D] 628 8 8 9 9 9 9 9 9 9 9 7 8 9 8 8 8 0 0 0 0 0 0 0 0 0 0 2 2 0 0 0 0
31 AIfDSo 49 1.689 1.776 118 1 0 0 0 168 [1:E] 646 8 8 8 8 8 7 7 7 7 7 7 7 7 6 8 8 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0
32 AIfDSo 49 1.589 1.913 111 0 0 0 0 181 [1:F] 648 7 7 7 7 7 7 6 7 7 7 7 7 7 7 7 7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
speed:1568 noncerate[GH/s]:59.485 (1.859/chip) hashrate[GH/s]:60.543 good:4155 errors:16 spi-err:3 miso-err:1 duplicates:0 jobs:314 cores:16% good:32 bad:0 off:0 (best[GH/s]:0.000) Sun Dec 1 17:19:50 2013
board-2 speed nrate hrate good errors spi-err miso-er duplic good bad off per chip good cores
0: 784 29.965 30.282 2093 9 1 1 0 16 0 0 (1.873/chip) 16%
1: 784 29.521 30.261 2062 7 2 0 0 16 0 0 (1.845/chip) 16%
Then it goes to this: 1 AIfDSo 49 0.888 1.025 62 1 0 1 0 97 [0:0] 583 3 4 4 4 4 4 4 4 4 4 4 4 4 4 4 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
2 AIfDSo 49 1.203 1.068 84 0 0 0 0 101 [0:1] 571 5 5 5 5 6 6 6 6 5 5 5 5 5 5 5 5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
3 AIfDSo 49 1.160 1.057 81 0 0 0 0 100 [0:2] 574 5 5 5 5 6 5 5 5 5 5 5 5 5 5 5 5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
4 AIfDSo 49 1.145 1.046 80 0 0 0 0 99 [0:3] 575 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
5 AIfDSo 49 0.959 1.078 67 0 0 0 0 102 [0:4] 585 5 5 4 4 4 4 4 4 4 4 4 4 4 4 4 5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
6 AIfDSo 49 1.016 1.068 71 0 0 0 0 101 [0:5] 585 4 4 4 4 5 5 5 5 5 5 5 4 4 4 4 4 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
7 AIfDSo 49 0.787 1.036 55 0 0 0 0 98 [0:6] 600 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
8 AIfDSo 49 1.031 1.004 72 1 0 0 0 95 [0:7] 584 5 5 5 5 5 5 5 4 4 4 4 3 4 4 5 5 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0
9 AIfDSo 49 0.916 1.110 64 0 0 0 0 105 [0:8] 576 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
10 AIfDSo 49 0.959 1.036 67 0 0 0 0 98 [0:9] 580 5 5 5 4 4 4 4 4 4 4 4 4 4 4 4 4 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
11 AIfDSo 49 1.160 1.046 81 1 0 0 0 99 [0:A] 572 5 5 6 6 5 5 5 5 5 5 5 5 5 5 4 5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0
12 AIfDSo 49 1.074 1.068 75 2 0 0 0 101 [0:B] 580 5 5 5 3 3 4 5 5 5 5 5 5 5 5 5 5 0 0 0 1 1 0 0 0 0 0 0 0 0 0 0 0
13 AIfDSo 49 1.045 1.068 73 0 0 0 0 101 [0:C] 575 4 4 4 4 4 4 5 5 5 5 5 5 5 5 5 4 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
14 AIfDSo 49 1.059 1.025 74 0 0 0 0 97 [0:D] 591 4 4 4 4 5 5 5 5 5 5 5 5 5 5 4 4 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
15 AIfDSo 49 1.217 1.046 85 0 1 0 0 99 [0:E] 561 6 6 6 6 5 5 5 5 5 5 5 5 5 5 5 6 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
16 AIfDSo 49 1.016 1.110 71 0 0 0 0 105 [0:F] 563 5 5 5 5 5 5 5 4 4 4 4 4 4 4 4 4 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
17 AIfDSo 49 1.918 1.903 134 0 0 0 0 180 [1:0] 539 9 9 9 8 8 8 8 8 8 8 8 8 8 9 9 9 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
18 AIfDSo 49 1.904 1.924 133 0 0 0 0 182 [1:1] 521 9 8 8 8 8 8 8 8 8 8 8 8 9 9 9 9 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
19 AIfDSo 49 1.833 1.881 128 0 0 0 0 178 [1:2] 544 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
20 AIfDSo 49 1.747 1.871 122 2 0 0 0 177 [1:3] 552 7 8 8 8 8 8 8 7 8 8 8 8 7 7 7 7 0 0 0 0 0 0 0 1 1 0 0 0 0 0 0 0
21 AIfDSo 49 1.704 1.871 119 2 0 0 0 177 [1:4] 544 7 7 7 7 7 7 8 8 8 8 8 8 8 7 7 7 0 0 0 0 1 1 0 0 0 0 0 0 0 0 0 0
22 AIfDSo 49 1.990 1.881 139 1 0 0 0 178 [1:5] 525 9 9 9 9 9 9 8 9 9 8 8 8 8 9 9 9 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0
23 AIfDSo 49 1.618 1.839 113 0 0 0 0 174 [1:6] 541 7 7 7 7 7 7 7 7 7 7 7 7 8 7 7 7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
24 AIfDSo 49 2.362 1.903 165 1 0 0 0 180 [1:7] 502 11 11 10 11 10 10 10 10 10 10 10 10 10 10 11 11 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0
25 AIfDSo 49 1.918 1.945 134 2 0 0 0 184 [1:8] 534 9 9 9 8 8 8 8 8 8 8 8 8 8 9 9 9 0 0 0 1 1 0 0 0 0 0 0 0 0 0 0 0
26 AIfDSo 49 1.532 1.860 107 1 0 0 0 176 [1:9] 555 7 7 7 7 7 6 7 7 7 7 7 7 7 6 6 5 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0
27 AIfDSo 49 1.833 1.903 128 1 0 0 0 180 [1:A] 531 8 9 8 8 8 8 8 8 8 8 8 8 8 7 8 8 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0
28 AIfDSo 49 1.904 2.008 133 4 0 0 0 190 [1:B] 531 8 8 8 8 8 8 9 9 9 9 9 9 8 8 7 8 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1
29 AIfDSo 49 2.004 1.945 140 1 0 2 1 184 [1:C] 526 9 9 9 8 8 8 8 9 9 9 9 9 9 9 9 9 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0
30 AIfDSo 49 2.033 1.903 142 0 0 0 0 180 [1:D] 520 9 9 9 9 9 9 8 9 9 9 9 9 8 9 9 9 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
31 AIfDSo 49 1.947 1.776 136 2 0 0 0 168 [1:E] 544 8 8 8 8 8 9 9 9 9 8 8 8 9 9 9 9 0 0 0 0 0 0 0 0 0 0 1 1 0 0 0 0
32 AIfDSo 49 1.833 1.913 128 0 0 0 0 181 [1:F] 551 7 7 8 8 8 8 9 9 9 8 8 8 8 8 8 7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
speed:1568 noncerate[GH/s]:46.715 (1.460/chip) hashrate[GH/s]:47.215 good:3263 errors:22 spi-err:1 miso-err:3 duplicates:1 jobs:300 cores:26% good:32 bad:0 off:0 (best[GH/s]:0.000) Sun Dec 1 17:24:50 2013
board-2 speed nrate hrate good errors spi-err miso-er duplic good bad off per chip good cores
0: 784 16.636 16.890 1162 5 1 1 0 16 0 0 (1.040/chip) 23%
1: 784 30.079 30.324 2101 17 0 2 1 16 0 0 (1.880/chip) 29%
Any idea how to toubleshoot this? I have fans pointed at the boards, they are cool. I also set the 49s to 53 in the best.cnf file, but it seems to keep putting them down to 49. then it goes down to this: board-2 speed nrate hrate good errors spi-err miso-er duplic good bad off per chip good cores
0: 848 6.483 7.065 397 492 0 3 57 16 0 0 (0.405/chip) 3%
1: 848 6.794 7.825 416 488 0 1 57 16 0 0 (0.425/chip) 3%
|
|
|
|
|
|
Doff
|
|
December 02, 2013, 12:20:05 AM |
|
Did you adjust your Pool difficulty to match the hashrate? If your are mining diff 1 shares it will slow down the miners like that.
|
|
|
|
|
|
zurg
|
|
December 02, 2013, 02:24:35 PM |
|
Is anyone mining Zetacoin?
I need some help with pool (cant get CoinEx running) or heck even solo mining.
Thanks
|
|
|
|
|
|
tom99
|
|
December 02, 2013, 03:58:55 PM
Last edit: December 02, 2013, 05:19:29 PM by tom99 |
|
Is anyone mining Zetacoin?
I need some help with pool (cant get CoinEx running) or heck even solo mining.
Thanks
you can use bfgminer for it but I did not test yet. edit: solo ok with bfgminer. |
|
|
|
|
|
zurg
|
|
December 02, 2013, 05:21:21 PM |
|
Is anyone mining Zetacoin?
I need some help with pool (cant get CoinEx running) or heck even solo mining.
Thanks
you can use bfgminer for it but I did not test yet. edit: solo ok with bfgminer. How do you get bfgminer on it? Any guides? Thanks! |
|
|
|
|
|
tom99
|
|
December 02, 2013, 05:53:58 PM |
|
Is anyone mining Zetacoin?
I need some help with pool (cant get CoinEx running) or heck even solo mining.
Thanks
you can use bfgminer for it but I did not test yet. edit: solo ok with bfgminer. How do you get bfgminer on it? Any guides? Thanks! read here https://asktom.cf/index.php?topic=251966.3720I changed 4 to 1 for it to work old v1 mboard clock_gettime(CLOCK_PROCESS_CPUTIME_ID, &t1); for (i = 0; i < 1; i++) { slot_on = 1;
|
|
|
|
|
klondike_bar
Legendary
Offline
Activity: 2184
Merit: 1005
ASIC Wannabe
|
|
December 02, 2013, 11:37:03 PM |
|
OK, so I have this... which is great... 1.) Although the nrate was 60, btcguild shows only 40. Any idea for that? 18 AIfDSo 49 2.176 1.913 152 0 0 0 0 181 [1:1] 618 9 9 9 9 10 10 10 10 10 10 10 10 9 9 9 9 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
19 AIfDSo 49 1.761 1.871 123 0 0 0 0 177 [1:2] 639 7 8 8 8 8 8 8 8 8 8 8 8 7 7 7 7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
20 AIfDSo 49 1.618 1.860 113 0 0 0 0 176 [1:3] 651 8 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
21 AIfDSo 49 1.904 1.860 133 0 0 0 0 176 [1:4] 632 9 9 9 9 8 8 8 8 8 8 8 8 8 8 8 9 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
22 AIfDSo 49 2.004 1.871 140 0 0 0 0 177 [1:5] 622 8 9 9 9 9 9 9 9 9 9 9 9 9 8 8 8 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
23 AIfDSo 49 1.861 1.829 130 0 0 0 0 173 [1:6] 631 8 8 8 8 8 8 8 8 8 8 9 9 8 8 8 8 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
24 AIfDSo 49 2.090 1.903 146 1 0 0 0 180 [1:7] 621 9 9 9 9 9 9 9 9 9 9 9 10 10 9 9 9 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0
25 AIfDSo 49 1.761 1.945 123 0 0 0 0 184 [1:8] 640 7 7 8 8 8 8 8 8 8 8 8 8 8 7 7 7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
26 AIfDSo 49 1.875 1.850 131 0 0 0 0 175 [1:9] 641 8 8 8 8 8 8 8 8 8 8 8 8 8 9 9 9 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
27 AIfDSo 49 1.833 1.892 128 0 0 0 0 179 [1:A] 636 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
28 AIfDSo 49 1.890 1.998 132 1 1 0 0 189 [1:B] 631 8 9 9 9 9 9 7 8 8 8 8 8 8 8 8 8 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0
29 AIfDSo 49 1.833 1.955 128 0 0 0 0 185 [1:C] 639 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
30 AIfDSo 49 1.947 1.913 136 4 0 0 0 181 [1:D] 628 8 8 9 9 9 9 9 9 9 9 7 8 9 8 8 8 0 0 0 0 0 0 0 0 0 0 2 2 0 0 0 0
31 AIfDSo 49 1.689 1.776 118 1 0 0 0 168 [1:E] 646 8 8 8 8 8 7 7 7 7 7 7 7 7 6 8 8 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0
32 AIfDSo 49 1.589 1.913 111 0 0 0 0 181 [1:F] 648 7 7 7 7 7 7 6 7 7 7 7 7 7 7 7 7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
speed:1568 noncerate[GH/s]:59.485 (1.859/chip) hashrate[GH/s]:60.543 good:4155 errors:16 spi-err:3 miso-err:1 duplicates:0 jobs:314 cores:16% good:32 bad:0 off:0 (best[GH/s]:0.000) Sun Dec 1 17:19:50 2013
board-2 speed nrate hrate good errors spi-err miso-er duplic good bad off per chip good cores
0: 784 29.965 30.282 2093 9 1 1 0 16 0 0 (1.873/chip) 16%
1: 784 29.521 30.261 2062 7 2 0 0 16 0 0 (1.845/chip) 16%
Then it goes to this: 1 AIfDSo 49 0.888 1.025 62 1 0 1 0 97 [0:0] 583 3 4 4 4 4 4 4 4 4 4 4 4 4 4 4 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
2 AIfDSo 49 1.203 1.068 84 0 0 0 0 101 [0:1] 571 5 5 5 5 6 6 6 6 5 5 5 5 5 5 5 5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
3 AIfDSo 49 1.160 1.057 81 0 0 0 0 100 [0:2] 574 5 5 5 5 6 5 5 5 5 5 5 5 5 5 5 5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
4 AIfDSo 49 1.145 1.046 80 0 0 0 0 99 [0:3] 575 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
5 AIfDSo 49 0.959 1.078 67 0 0 0 0 102 [0:4] 585 5 5 4 4 4 4 4 4 4 4 4 4 4 4 4 5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
6 AIfDSo 49 1.016 1.068 71 0 0 0 0 101 [0:5] 585 4 4 4 4 5 5 5 5 5 5 5 4 4 4 4 4 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
7 AIfDSo 49 0.787 1.036 55 0 0 0 0 98 [0:6] 600 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
8 AIfDSo 49 1.031 1.004 72 1 0 0 0 95 [0:7] 584 5 5 5 5 5 5 5 4 4 4 4 3 4 4 5 5 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0
9 AIfDSo 49 0.916 1.110 64 0 0 0 0 105 [0:8] 576 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
10 AIfDSo 49 0.959 1.036 67 0 0 0 0 98 [0:9] 580 5 5 5 4 4 4 4 4 4 4 4 4 4 4 4 4 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
11 AIfDSo 49 1.160 1.046 81 1 0 0 0 99 [0:A] 572 5 5 6 6 5 5 5 5 5 5 5 5 5 5 4 5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0
12 AIfDSo 49 1.074 1.068 75 2 0 0 0 101 [0:B] 580 5 5 5 3 3 4 5 5 5 5 5 5 5 5 5 5 0 0 0 1 1 0 0 0 0 0 0 0 0 0 0 0
13 AIfDSo 49 1.045 1.068 73 0 0 0 0 101 [0:C] 575 4 4 4 4 4 4 5 5 5 5 5 5 5 5 5 4 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
14 AIfDSo 49 1.059 1.025 74 0 0 0 0 97 [0:D] 591 4 4 4 4 5 5 5 5 5 5 5 5 5 5 4 4 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
15 AIfDSo 49 1.217 1.046 85 0 1 0 0 99 [0:E] 561 6 6 6 6 5 5 5 5 5 5 5 5 5 5 5 6 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
16 AIfDSo 49 1.016 1.110 71 0 0 0 0 105 [0:F] 563 5 5 5 5 5 5 5 4 4 4 4 4 4 4 4 4 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
17 AIfDSo 49 1.918 1.903 134 0 0 0 0 180 [1:0] 539 9 9 9 8 8 8 8 8 8 8 8 8 8 9 9 9 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
18 AIfDSo 49 1.904 1.924 133 0 0 0 0 182 [1:1] 521 9 8 8 8 8 8 8 8 8 8 8 8 9 9 9 9 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
19 AIfDSo 49 1.833 1.881 128 0 0 0 0 178 [1:2] 544 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
20 AIfDSo 49 1.747 1.871 122 2 0 0 0 177 [1:3] 552 7 8 8 8 8 8 8 7 8 8 8 8 7 7 7 7 0 0 0 0 0 0 0 1 1 0 0 0 0 0 0 0
21 AIfDSo 49 1.704 1.871 119 2 0 0 0 177 [1:4] 544 7 7 7 7 7 7 8 8 8 8 8 8 8 7 7 7 0 0 0 0 1 1 0 0 0 0 0 0 0 0 0 0
22 AIfDSo 49 1.990 1.881 139 1 0 0 0 178 [1:5] 525 9 9 9 9 9 9 8 9 9 8 8 8 8 9 9 9 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0
23 AIfDSo 49 1.618 1.839 113 0 0 0 0 174 [1:6] 541 7 7 7 7 7 7 7 7 7 7 7 7 8 7 7 7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
24 AIfDSo 49 2.362 1.903 165 1 0 0 0 180 [1:7] 502 11 11 10 11 10 10 10 10 10 10 10 10 10 10 11 11 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0
25 AIfDSo 49 1.918 1.945 134 2 0 0 0 184 [1:8] 534 9 9 9 8 8 8 8 8 8 8 8 8 8 9 9 9 0 0 0 1 1 0 0 0 0 0 0 0 0 0 0 0
26 AIfDSo 49 1.532 1.860 107 1 0 0 0 176 [1:9] 555 7 7 7 7 7 6 7 7 7 7 7 7 7 6 6 5 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0
27 AIfDSo 49 1.833 1.903 128 1 0 0 0 180 [1:A] 531 8 9 8 8 8 8 8 8 8 8 8 8 8 7 8 8 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0
28 AIfDSo 49 1.904 2.008 133 4 0 0 0 190 [1:B] 531 8 8 8 8 8 8 9 9 9 9 9 9 8 8 7 8 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1
29 AIfDSo 49 2.004 1.945 140 1 0 2 1 184 [1:C] 526 9 9 9 8 8 8 8 9 9 9 9 9 9 9 9 9 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0
30 AIfDSo 49 2.033 1.903 142 0 0 0 0 180 [1:D] 520 9 9 9 9 9 9 8 9 9 9 9 9 8 9 9 9 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
31 AIfDSo 49 1.947 1.776 136 2 0 0 0 168 [1:E] 544 8 8 8 8 8 9 9 9 9 8 8 8 9 9 9 9 0 0 0 0 0 0 0 0 0 0 1 1 0 0 0 0
32 AIfDSo 49 1.833 1.913 128 0 0 0 0 181 [1:F] 551 7 7 8 8 8 8 9 9 9 8 8 8 8 8 8 7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
speed:1568 noncerate[GH/s]:46.715 (1.460/chip) hashrate[GH/s]:47.215 good:3263 errors:22 spi-err:1 miso-err:3 duplicates:1 jobs:300 cores:26% good:32 bad:0 off:0 (best[GH/s]:0.000) Sun Dec 1 17:24:50 2013
board-2 speed nrate hrate good errors spi-err miso-er duplic good bad off per chip good cores
0: 784 16.636 16.890 1162 5 1 1 0 16 0 0 (1.040/chip) 23%
1: 784 30.079 30.324 2101 17 0 2 1 16 0 0 (1.880/chip) 29%
Any idea how to toubleshoot this? I have fans pointed at the boards, they are cool. I also set the 49s to 53 in the best.cnf file, but it seems to keep putting them down to 49. then it goes down to this: board-2 speed nrate hrate good errors spi-err miso-er duplic good bad off per chip good cores
0: 848 6.483 7.065 397 492 0 3 57 16 0 0 (0.405/chip) 3%
1: 848 6.794 7.825 416 488 0 1 57 16 0 0 (0.425/chip) 3%
make sure you use the start-miner command or reboot after making changes to the best.cnf file. check your pool difficulty. if you are running 2 cards, your difficulty should be at least 64, but in some pools 128 will work a lot better. |
|
|
|
|
Beans
|
|
December 09, 2013, 05:44:36 AM |
|
On my unit one of the last cards in a bank always seems to shut off after hour or so. Sometimes it comes back on for a while and sometimes the issue spreads to the 3rd card in the bank. I've rotated card positions and it doesn't seem to solve the problem. Anyone know what's causing this?
|
|
|
|
|
|
Keefe
|
|
December 09, 2013, 06:14:10 AM |
|
On my unit one of the last cards in a bank always seems to shut off after hour or so. Sometimes it comes back on for a while and sometimes the issue spreads to the 3rd card in the bank. I've rotated card positions and it doesn't seem to solve the problem. Anyone know what's causing this?
Have you secured your cards so they don't flutter in the airflow? |
|
|
|
Cablez
Legendary
Offline
Activity: 1400
Merit: 1000
I owe my soul to the Bitcoin code...
|
|
December 09, 2013, 11:37:38 AM |
|
Regulator temp. not too high? That will cause hash cycling as well as it heats and cools off.
|
Tired of substandard power distribution in your ASIC setup??? Chris' Custom Cablez will get you sorted out right! No job too hard so PM me for a quote
Check my products or ask a question here: https://asktom.cf/index.php?topic=74397.0
|
|
|
mwk13
Newbie
Offline
Activity: 13
Merit: 0
|
|
December 11, 2013, 07:01:26 AM |
|
I've applied copper heatsinks to the back of the new unmodded h-cards i have, directed fans (3x 120 mm) at them but the cards still get so hot they seem on the verge of burning up.
What else can i try?
Does anyone have instructions that show how to adjust the voltage using the trimpots?
For now, I'd like to turn down the voltage to get ~25gh/s (currently at 33+ gh/s).
Thank you.
|
|
|
|
|
|
Trongersoll
|
|
December 29, 2013, 08:12:55 PM |
|
I'm feeling stupid today.  I just added two more boards to my rig. I now have SlotsS 0,1 4,5 8 C occupied. Oddly, the board in Slot 1 is grossly under performing: speed:4345 noncerate[GH/s]:151.183 (1.779/chip) hashrate[GH/s]:163.407 good:10560 errors:484 spi-err:3 miso-err:21 jobs:375 cores:84% good:79 bad:3 off:3 (best[GH/s]:160.073) Sun Dec 29 20:13:30 2013 0: 770 25.383 26.678 1773 67 1 4 14 1 1 (1.586/chip) 83% 1: 220 6.242 7.621 436 39 1 1 4 0 1 (1.248/chip) 59% 4: 825 32.184 33.812 2248 60 0 0 15 1 0 (2.011/chip) 87% 5: 880 29.750 32.597 2078 104 1 0 16 0 0 (1.859/chip) 87% 8: 825 27.287 29.204 1906 89 0 16 15 0 1 (1.705/chip) 86% C: 825 30.337 33.495 2119 125 0 0 15 1 0 (1.896/chip) 85% this is a V2 motherboard any suggestions as to what to do? i looked through past posts but it literraly made my head hurt. |
|
|
|
|
Xian01
Legendary
Offline
Activity: 1652
Merit: 1067
Christian Antkow
|
|
December 29, 2013, 10:32:44 PM |
|
the board in Slot 1 is grossly under performing:
1: 220 6.242 7.621 436 39 1 1 4 0 1 (1.248/chip) 59%
this is a V2 motherboard any suggestions as to what to do? i looked through past posts but it literraly made my head hurt.
Apologies if you have already tried this, but does every card underperform in slot 1 ? Can you shuffle around to put that current card in slot 1 closer to slot F ? Do you *HAVE TO* have something plugged into slot 1 ? |
|
|
|
|
|
Trongersoll
|
|
December 29, 2013, 11:00:46 PM |
|
the board in Slot 1 is grossly under performing:
1: 220 6.242 7.621 436 39 1 1 4 0 1 (1.248/chip) 59%
this is a V2 motherboard any suggestions as to what to do? i looked through past posts but it literraly made my head hurt.
Apologies if you have already tried this, but does every card underperform in slot 1 ? Can you shuffle around to put that current card in slot 1 closer to slot F ? Do you *HAVE TO* have something plugged into slot 1 ? I'm going to try shuffling them around, just didn't feel up to it today. I thought that i read that on the v2 motherboards you had to populate them in order, but if it works moving it, what the heck. |
|
|
|
|
Swimmer63
Legendary
Offline
Activity: 1593
Merit: 1004
|
|
January 14, 2014, 06:20:56 PM |
|
Ordered a new kit and expect it today. I assume it will be a V3 M-Board. But it's unclear where to find an image file for V3. The OP just lists V1 and V2.
Anyone know?
|
|
|
|
|
|
zurg
|
|
January 14, 2014, 07:00:40 PM |
|
Ordered a new kit and expect it today. I assume it will be a V3 M-Board. But it's unclear where to find an image file for V3. The OP just lists V1 and V2.
Anyone know?
If you find one let me know where to get it.., so I can host it. Only have V1 image so far. |
|
|
|
|
Swimmer63
Legendary
Offline
Activity: 1593
Merit: 1004
|
|
January 14, 2014, 07:02:36 PM |
|
Ordered a new kit and expect it today. I assume it will be a V3 M-Board. But it's unclear where to find an image file for V3. The OP just lists V1 and V2.
Anyone know?
If you find one let me know where to get it.., so I can host it. Only have V1 image so far. V2 is on the OP. |
|
|
|
|
|
|
Swimmer63
Legendary
Offline
Activity: 1593
Merit: 1004
|
|
January 14, 2014, 07:17:53 PM |
|
And there it is! Thank you sir! |
|
|
|
|
|
