The Chili – 30+GH/s BFL based Bitcoin Miner Assembly

[jelin1984]

i have artic twin turbo 2

what i must do at miner with hashing 28gh

[MrTeal]

i have artic twin turbo 2

what i must do at miner with hashing 28gh

Did you try reseating the heat sink to make sure you have good contact?

[ranmn7]

watching

[jelin1984]

which is the correct and incorrect Fujipoly     SIDE
Fujipoly Extreme Thermal Pad

I MEAN ONE SIDE HAVE SOME SQUARE these side put at heatsink or at jalapeno chip
?

[MrTeal]

which is the correct and incorrect Fujipoly     SIDE
Fujipoly Extreme Thermal Pad

I MEAN ONE SIDE HAVE SOME SQUARE these side put at heatsink or at jalapeno chip
?

Can you post a close-up picture of what you're talking about, preferably still on the board?

Thanks.

[jelin1984]

http://www.frozencpu.com/products/image/11631/thr-84.jpg/thr-84/Fujipoly_Premium_System_Builder_Thermal_Pad_-_14_Sheet_-_150_x_100_x_05_-_Thermal_Conductivity_60_WmK.html


if you see the photo you see that one side have some like square and the other side of thermal pad does not

which side go where
which go SIDE GO TO HEATSINK OF COOLER?

[MrTeal]

http://www.frozencpu.com/products/image/11631/thr-84.jpg/thr-84/Fujipoly_Premium_System_Builder_Thermal_Pad_-_14_Sheet_-_150_x_100_x_05_-_Thermal_Conductivity_60_WmK.html


if you see the photo you see that one side have some like square and the other side of thermal pad does not

which side go where
which go SIDE GO TO HEATSINK OF COOLER?

Yes, but can you take a picture of it on your board as you have it mounted?

[jelin1984]

OK THESE IS CORRECT OR THE SECOND PHOTO IS CORRECT?

[MrTeal]

The shiny bumpy part is the plastic that protects the thermal pad in transit. You should take it off.

[jelin1984]

yes i will take off
but which of the 2 photo is correct?
first or second??

[MrTeal]

yes i will take off
but which of the 2 photo is correct?
first or second??

It shouldn't matter.

[jelin1984]

ok i will try again and let you know the hashing of the second one the first is 35 gh
the second is somewhere between 28-30 gh

[suprabitz]

i have 1 chili i havent even set up. ordered these chips before i got out of mining

if anyone wants it i will do $650 (via bitcoin) shipped. you can contact Mr Teal and he will verify that he shipped me one.

Escrow with John K is ok if you pay the fees.

ready to ship - no wait

[Spieder]

Mr. Teal,

Since you guys were so successful on this project, any thoughts on whether or not your considering a group buy for your own custom chips or another version of the Chili using an existing chip?

[Keefe]

The shiny bumpy part is the plastic that protects the thermal pad in transit. You should take it off.

There is plastic on both sides that must be taken off. One side is bumpy, one side is smooth. Remove both.

[Spotswood]

What are the dimensions of the board?

[jelin1984]

Is the most sweet miner I have ever have

[dtown]

Is the most sweet miner I have ever have

You should print this directly on the next PCB

[ChipGeek]

No.  It will say
"All your coin are belong to us."

[jelin1984]

haha

how i use it with raspery bi model?

 


2 chilli avg 68 gh
and 345 watt from the wall