Announcement: Bitmain launches AntMiner solution, 0.68 J/GH on chip

[martijntje]

OK, will go ahead with the order then. Thanks guys.

[adqsonline]

Hi,
Some help needed please.

Today i received 2 S3 from Batch 4.

1 of the machines is mining but the green led light doesnt blinks when connected to internet and mining. Is allways green without blinking like me batch 2 S3 machines. And the fan of chain 2 is working at more than 10 000 rotations.

The other machine from this batch 5 i connect it and i feel the fans working but no lights at all.

Can anyone to help me out to fix this issues? By the way i allways use 2 psu's, one in each blade like i do in my Batch 2 machines(because if goes wrong i dont spent to much money to replace it).

Thanks in advanced.

[allcoinminer]

Hi,
Some help needed please.

Today i received 2 S3 from Batch 4.

1 of the machines is mining but the green led light doesnt blinks when connected to internet and mining. Is allways green without blinking like me batch 2 S3 machines. And the fan of chain 2 is working at more than 10 000 rotations.

The other machine from this batch 5 i connect it and i feel the fans working but no lights at all.

Can anyone to help me out to fix this issues? By the way i allways use 2 psu's, one in each blade like i do in my Batch 2 machines(because if goes wrong i dont spent to much money to replace it).

Thanks in advanced.

As per your post the one miner in your S3 where the fan rpm is lower in batch 4 is loaded with older firmware.
The other one which do not have a green steady led is loaded with the latest firmware.
Most of the users reported the S3 Batch 4 fan above 4000-10000 and bitmaintech not yet responded to it.
Inshort it seems like all your miners are mining good with normal readings and need to do anything now.

[adqsonline]

Hi,
Some help needed please.

Today i received 2 S3 from Batch 4.

1 of the machines is mining but the green led light doesnt blinks when connected to internet and mining. Is allways green without blinking like me batch 2 S3 machines. And the fan of chain 2 is working at more than 10 000 rotations.

The other machine from this batch 5 i connect it and i feel the fans working but no lights at all.

Can anyone to help me out to fix this issues? By the way i allways use 2 psu's, one in each blade like i do in my Batch 2 machines(because if goes wrong i dont spent to much money to replace it).

Thanks in advanced.

As per your post the one miner in your S3 where the fan rpm is lower in batch 4 is loaded with older firmware.
The other one which do not have a green steady led is loaded with the latest firmware.
Most of the users reported the S3 Batch 4 fan above 4000-10000 and bitmaintech not yet responded to it.
Inshort it seems like all your miners are mining good with normal readings and need to do anything now.

Thank you for your answer, but 1 of them makes only the fan noise apart that no lights at all, is like it only connects the fans for example. About the one with steady green light no steady hash power.

[allcoinminer]

Hi,
Some help needed please.

Today i received 2 S3 from Batch 4.

1 of the machines is mining but the green led light doesnt blinks when connected to internet and mining. Is allways green without blinking like me batch 2 S3 machines. And the fan of chain 2 is working at more than 10 000 rotations.

The other machine from this batch 5 i connect it and i feel the fans working but no lights at all.

Can anyone to help me out to fix this issues? By the way i allways use 2 psu's, one in each blade like i do in my Batch 2 machines(because if goes wrong i dont spent to much money to replace it).

Thanks in advanced.

As per your post the one miner in your S3 where the fan rpm is lower in batch 4 is loaded with older firmware.
The other one which do not have a green steady led is loaded with the latest firmware.
Most of the users reported the S3 Batch 4 fan above 4000-10000 and bitmaintech not yet responded to it.
Inshort it seems like all your miners are mining good with normal readings and need to do anything now.

Thank you for your answer, but 1 of them makes only the fan noise apart that no lights at all, is like it only connects the fans for example. About the one with steady green light no steady hash power.

No green light and unsteady hashing mean its a Batch 1 or 2 or 3 miner with older firmware even though you ordered from batch 4 or 5.
Update this miner with the latest firmware.
/edit

[adqsonline]

Hi,
Some help needed please.

Today i received 2 S3 from Batch 4.

1 of the machines is mining but the green led light doesnt blinks when connected to internet and mining. Is allways green without blinking like me batch 2 S3 machines. And the fan of chain 2 is working at more than 10 000 rotations.

The other machine from this batch 5 i connect it and i feel the fans working but no lights at all.

Can anyone to help me out to fix this issues? By the way i allways use 2 psu's, one in each blade like i do in my Batch 2 machines(because if goes wrong i dont spent to much money to replace it).

Thanks in advanced.

As per your post the one miner in your S3 where the fan rpm is lower in batch 4 is loaded with older firmware.
The other one which do not have a green steady led is loaded with the latest firmware.
Most of the users reported the S3 Batch 4 fan above 4000-10000 and bitmaintech not yet responded to it.
Inshort it seems like all your miners are mining good with normal readings and need to do anything now.

Thank you for your answer, but 1 of them makes only the fan noise apart that no lights at all, is like it only connects the fans for example. About the one with steady green light no steady hash power.

No green light and unsteady hashing mean its a Batch 1 or 2 or 3 miner with older firmware even though you ordered from batch 4 or 5.
Update this miner with the latest firmware.
/edit

Yes i can confirm the firmware of this batch 4 is the same of my batch 2 machines. But i have 3 units of batch 3 that works very fine with a green light blinking when mining.
I am also more worried with my other unit of batch 4 which doesnt have lights at all, it looks like that only works the fans, apart that no lights at all.
Tomorrrow i will take a look at both machines. Now i need to reboot my brains with a good night sleep lol
Thanks for the help.

[Reven79]

Bitmain is a good company, pretty much right now the only good company out there in regards to miner manufacturing. No worries

I agree, Bitmain always delivered, product does as it should and doesn't breakdown.

Slightly concerned that I've heard nothing for a few days now.

I've had no more emails from Bitmain other than order confirmation from batch 5

I just got my Batch 5 shipping confirmation. 5 days ahead of schedule... ! YES! 

BTW, anyone got the coupons or the 7.7% refund? How does it work? 

I ordered a set of S3s from Batch 1 and about 3 days after the offer I decided to go with the 7.77% refund.  I wasn't until 7/28/2014 that I actually received that refund so I have no idea how that will relate to other batches.

[adqsonline]

Yesterday i got 2 Antminers S3 from Batch 4.

Both of machines doesnt work. Would like to have your help. To not complicate today i will ask help for the first one.

Machine allways logs me of when i try to access control panel through the IP. When i try to make any performance logs me off again.

I tried to resset the machine in control panel and in the hole of machine but nothing.

Doesnt accept also the download of firmware because instead logs me off.

I am feeling powerless over this machine because nothing appears to respond to my actions allways getting logged of.

[lovenlifelarge]

How do i get my 10% off my next order & why is bitmain not selling those switches as a part of a 2 unit order?
Just add the price into the sale??

BTW nothing wrong with my S3-B3 works perfectly!

[adqsonline]

Yesterday i got 2 Antminers S3 from Batch 4.

Both of machines doesnt work. Would like to have your help. To not complicate today i will ask help for the first one.

Machine allways logs me of when i try to access control panel through the IP. When i try to make any performance logs me off again.

I tried to resset the machine in control panel and in the hole of machine but nothing.

Doesnt accept also the download of firmware because instead logs me off.

I am feeling powerless over this machine because nothing appears to respond to my actions allways getting logged of.

You aren't trying to set them both up at the same time are you?

Keep 1 offline, set 1 up with a static IP/settings and then power up your 2nd one. You could be having IP conflicts between the 2 units.

Hi, i allways set up my machines 1 at the time. Everything is wrong with them. Doesnt mines, doesnt appear the chains in miner status, most of the times i try to take any action and it logs me off to the login pannel. I am guessing that i have spent almost 1000 euros to through to the garbage. Already tried to replace the firmware and nothing.
I have machines from Batch 2 that works perfectly. Dont know anymore what to do as i dont know how its possible to send so disfunctional machines to costumers if they try them first. No reply from support.

[allcoinminer]

Yesterday i got 2 Antminers S3 from Batch 4.

Both of machines doesnt work. Would like to have your help. To not complicate today i will ask help for the first one.

Machine allways logs me of when i try to access control panel through the IP. When i try to make any performance logs me off again.

I tried to resset the machine in control panel and in the hole of machine but nothing.

Doesnt accept also the download of firmware because instead logs me off.

I am feeling powerless over this machine because nothing appears to respond to my actions allways getting logged of.

You aren't trying to set them both up at the same time are you?

Keep 1 offline, set 1 up with a static IP/settings and then power up your 2nd one. You could be having IP conflicts between the 2 units.

Hi, i allways set up my machines 1 at the time. Everything is wrong with them. Doesnt mines, doesnt appear the chains in miner status, most of the times i try to take any action and it logs me off to the login pannel. I am guessing that i have spent almost 1000 euros to through to the garbage. Already tried to replace the firmware and nothing.
I have machines from Batch 2 that works perfectly. Dont know anymore what to do as i dont know how its possible to send so disfunctional machines to costumers if they try them first. No reply from support.

Open the cover of this machine and look of any loose cables, unplug them one by one and reconnect.
Also, getting logged off like yours means you have an IP conflict.
It can be of many reasons. So just change your miner IP to a different one like 192.168.1.95
If not working change it to 192.168.1.105 and try again.
Post a screenshot of your Miner Status page and WAN settings page here if its still not working.

[adqsonline]

Yesterday i got 2 Antminers S3 from Batch 4.

Both of machines doesnt work. Would like to have your help. To not complicate today i will ask help for the first one.

Machine allways logs me of when i try to access control panel through the IP. When i try to make any performance logs me off again.

I tried to resset the machine in control panel and in the hole of machine but nothing.

Doesnt accept also the download of firmware because instead logs me off.

I am feeling powerless over this machine because nothing appears to respond to my actions allways getting logged of.

You aren't trying to set them both up at the same time are you?

Keep 1 offline, set 1 up with a static IP/settings and then power up your 2nd one. You could be having IP conflicts between the 2 units.

Hi, i allways set up my machines 1 at the time. Everything is wrong with them. Doesnt mines, doesnt appear the chains in miner status, most of the times i try to take any action and it logs me off to the login pannel. I am guessing that i have spent almost 1000 euros to through to the garbage. Already tried to replace the firmware and nothing.
I have machines from Batch 2 that works perfectly. Dont know anymore what to do as i dont know how its possible to send so disfunctional machines to costumers if they try them first. No reply from support.

Open the cover of this machine and look of any loose cables, unplug them one by one and reconnect.
Also, getting logged off like yours means you have an IP conflict.
It can be of many reasons. So just change your miner IP to a different one like 192.168.1.95
If not working change it to 192.168.1.105 and try again.
Post a screenshot of your Miner Status page and WAN settings page here if its still not working.

Ok i am doing 1 machine at time (i never connect 2 machines at the same time). Lets start by IP config.

I have 3 previous machines that uses the following ip's( they all work very well):
192.168.1.155
.... ..... ... 156
..... .... .... 157
Now for this new machine i set up the ip 192.168.1.158 but it still logs me off everytime i want to perform an action in control panel.

if i changed the ip what option i should click in this machine at least to make it working? Reboot? Reset? Firmware, i already tried the 2 available on the website?
Thanks

[adqsonline]

After i set up a stable ip in my S3 now i can´t see the blades in mining status and the device is mining at 0.00GH/s.

How should i fix this?

Thanks.

[Swimmer63]

After i set up a stable ip in my S3 now i can´t see the blades in mining status and the device is mining at 0.00GH/s.

How should i fix this?

Thanks.

Check to make sure your pools are set up correctly. 
You may have to unplug the miner and restart it.  Rebooting does always reset everything properly.
Suggest you use DNS of 8.8.8.8

[xstr8guy]

Ok i am doing 1 machine at time (i never connect 2 machines at the same time). Lets start by IP config.

I have 3 previous machines that uses the following ip's( they all work very well):
192.168.1.155
.... ..... ... 156
..... .... .... 157
Now for this new machine i set up the ip 192.168.1.158 but it still logs me off everytime i want to perform an action in control panel.

if i changed the ip what option i should click in this machine at least to make it working? Reboot? Reset? Firmware, i already tried the 2 available on the website?
Thanks

Some other equipment is probably using .158. Use an IP Scanner to find an unused address.

[adqsonline]

After i set up a stable ip in my S3 now i can´t see the blades in mining status and the device is mining at 0.00GH/s.

How should i fix this?

Thanks.

Check to make sure your pools are set up correctly. 
You may have to unplug the miner and restart it.  Rebooting does always reset everything properly.
Suggest you use DNS of 8.8.8.8

Thank you for ur reply.

I am trying to isolate the problem with help of you members. And once that both machines have similar problems which i find unusual it could be a router problem or internet problem. I am asking this because besides this 2 machines i have 3 previous Antminers S3 hashing normally at good rate and i wounder if i have enough internet or router for more machines.

[adqsonline]

After i set up a stable ip in my S3 now i can´t see the blades in mining status and the device is mining at 0.00GH/s.

How should i fix this?

Thanks.

Check to make sure your pools are set up correctly. 
You may have to unplug the miner and restart it.  Rebooting does always reset everything properly.
Suggest you use DNS of 8.8.8.8

Thank you for ur reply.

I am trying to isolate the problem with help of you members. And once that both machines have similar problems which i find unusual it could be a router problem or internet problem. I am asking this because besides this 2 machines i have 3 previous Antminers S3 hashing normally at good rate and i wounder if i have enough internet or router for more machines.

The problem isnt either Internet or Router, i am more sure now that's about Antminer control border or its ethernet port.

[Swimmer63]

After i set up a stable ip in my S3 now i can´t see the blades in mining status and the device is mining at 0.00GH/s.

How should i fix this?

Thanks.

Check to make sure your pools are set up correctly. 
You may have to unplug the miner and restart it.  Rebooting does always reset everything properly.
Suggest you use DNS of 8.8.8.8

Thank you for ur reply.

I am trying to isolate the problem with help of you members. And once that both machines have similar problems which i find unusual it could be a router problem or internet problem. I am asking this because besides this 2 machines i have 3 previous Antminers S3 hashing normally at good rate and i wounder if i have enough internet or router for more machines.

The problem isnt either Internet or Router, i am more sure now that's about Antminer control border or its ethernet port.

Maybe reset to factory default and try again.

[allcoinminer]

After i set up a stable ip in my S3 now i can´t see the blades in mining status and the device is mining at 0.00GH/s.

How should i fix this?

Thanks.

The problem can only be fixed if you follow proper troubleshooting steps.
Go through my post again and do as said. Also, post images as said in the post.
https://asktom.cf/index.php?topic=330665.msg8199301#msg8199301

[BITMAIN]

ANTMINER S3 Batch 6 sales open. 0.66BTC per S3 will be shipped on August 12th, shipping cost included.