[ANN] Technobit HEX8A1 -240 GHs Coincraft A1 board- Finished production

[iFA88]

Yo, but i use root for every time so i dont think that i need sudo.

Yes i have soon read this, but the compile fails ^^

Oops, forgot to add sudo  

Post updated.

[opodark]

hello Marto hello Technobit, i never received answer for my order  23-11-2013 SZYESJVZP (1/2 week of december) , paid for express delivery and received in 07-01-2014 with standard courier.
now i bought 3 x hex8a1  (order BHVSODEUH paid by bank wire in 21-03-2014) can i get these in time? can i get back 50 eur for wrong shipping?  i will get one day my 25% hashing power bonus for 5 week delay? many thanks.

[Lucko]

I had the same problem now 2 times. But in both cases it was not Technobit error. Did you look was it send normal or express? In my case it was Speedy error sending express normal or even lost it and found it weeks later. You might have the same problem...

[ZBC3]

Martin,

Thank you for manufacturing some of the most reliable and readily available miners on the market . That being said , are the end of March 260's still on schedule? I know there's a few more days to go, but I wanted to make sure. I saw the new listing has April listed with the same price as the end of March batch.

[TrytoHex]

Martin,

Thank you for manufacturing some of the most reliable and readily available miners on the market . That being said , are the end of March 260's still on schedule? I know there's a few more days to go, but I wanted to make sure. I saw the new listing has April listed with the same price as the end of March batch.

Hi marto74,

Same question Here but for the 130GHs version, is everything going to be shoppend on time?
You started sending out the units early, but my order still only says payment accepted.

[TrytoHex]

Martin,

Thank you for manufacturing some of the most reliable and readily available miners on the market . That being said , are the end of March 260's still on schedule? I know there's a few more days to go, but I wanted to make sure. I saw the new listing has April listed with the same price as the end of March batch.

Hi marto74,

Same question Here but for the 130GHs version, is everything going to be shoppend on time?
You started sending out the units early, but my order still only says payment accepted.

Never mind, status just changed to shipped. 

[marto74]

0.3.0 Milestone release http://technobit.eu/0_3_0.rar
- GET WORK cgminer support is depreciated. !!!USE STRATUM ONLY!!!!
* cgminer patch to cgminer 4.2.1 rev df7dcab4677a9fea1e1b7ac7b756d72e2e9c6f46.patch
* cgminer bug fixes: thread locking, memleaks, stage work buffer length adjustments and many more. All hex drivers were rewritten
* cgminer the most stable release! We encourage all to upgrade!
* openwrt updated to r40295

[Zich]

0.3.0 Milestone release http://technobit.eu/0_3_0.rar
- GET WORK cgminer support is depreciated. !!!USE STRATUM ONLY!!!!
* cgminer patch to cgminer 4.2.1 rev df7dcab4677a9fea1e1b7ac7b756d72e2e9c6f46.patch
* cgminer bug fixes: thread locking, memleaks, stage work buffer length adjustments and many more. All hex drivers were rewritten
* cgminer the most stable release! We encourage all to upgrade!
* openwrt updated to r40295

Wonderful. Thanks for the hard work  

Code:

1. git clone https://github.com/ckolivas/cgminer.git
2. mv cgminer cgminer-4.2.1
3. cd cgminer-4.2.1
4. git checkout df7dcab4677a9fea1e1b7ac7b756d72e2e9c6f46
5. wget https://www.dropbox.com/s/y2h9jqe4uswg9of/df7dcab4677a9fea1e1b7ac7b756d72e2e9c6f46.patch 
6. patch -p1 < df7dcab4677a9fea1e1b7ac7b756d72e2e9c6f46.patch
7. ./autogen.sh --enable-hexminera --enable-hexminerc --enable-hexminerb --enable-hexmineru --enable-hexminer8
8. make

[Zich]

I got insanely high reject rated 

[grana]

I got insanely high reject rated 

http://s26.postimg.org/mbvbigo3t/Insane.jpg

And I, but after reboot all is fine!

[loshia]

I got insanely high reject rated 

A fix will be released soon this is not happaning at btcguild eligus or bitminter

[Zich]

A fix will be released soon this is not happaning at btcguild eligus or bitminter

Nice, thanks loshia  



Thanks grana, but reboot didn't fix the problem since i am in slush pool  

[lucazane]

A fix will be released soon this is not happaning at btcguild eligus or bitminter

Nice, thanks loshia  



Thanks grana, but reboot didn't fix the problem since i am in slush pool  

Work well on eligius too

[lucazane]

With the 0.3.0 tplink image, I get 1.5 GH/s more per hex8.


also the load avg is 3 times less than before

[Zich]

Guys, i just receive the fix & already test it 

It's work like a charm, no more high reject at slush pool. And we can mine at diff one with up to 4 boards with this version, Chip reset code works better at diff 1 

Here is the download link if some of you wanna try, it's on latest cgminer-4.2.2 
https://www.dropbox.com/s/zbzzoaxg4jucvfx/0_3_1.rar

Code:

1. git clone https://github.com/ckolivas/cgminer.git
2. mv cgminer cgminer-4.2.2
3. cd cgminer-4.2.2
4. git checkout 5ed45a0d7a3bd71ed1b8726e5f1cdac55bf68196
5. wget https://www.dropbox.com/s/1kspms3gw0336du/5ed45a0d7a3bd71ed1b8726e5f1cdac55bf68196.patch 
6. patch -p1 < 5ed45a0d7a3bd71ed1b8726e5f1cdac55bf68196.patch
7. ./autogen.sh --enable-hexminera --enable-hexminerc --enable-hexminerb --enable-hexmineru --enable-hexminer8
8. make

[marto74]

0.3.1 Milestone release http://technobit.eu/0_3_1.rar

[gcube1305]

0.3.1 Milestone release http://technobit.eu/0_3_1.rar

Hello Martin,
Link down, is the 0.3.1 version available or is this a typo error ?
0.3.0 is available.

[Zich]

0.3.1 Milestone release http://technobit.eu/0_3_1.rar

Hello Martin,
Link down, is the 0.3.1 version available or is this a typo error ?
0.3.0 is available.

Try this http://technobit.eu/0_3_1.rar

[gcube1305]

0.3.1 Milestone release http://technobit.eu/0_3_1.rar

Hello Martin,
Link down, is the 0.3.1 version available or is this a typo error ?
0.3.0 is available.

Try this http://technobit.eu/0_3_1.rar

Great thanks.

[gcube1305]

Is this update "mandatory"?
I mean my hex8 is working perfectly (more than 1 month now, no reboot at all, with default settings 260@1000 and almost no HW error), what will i gain with this update?