[Antminer S1 Sales open] Price changes daily, now 0.414 BTC for 180GH/s

[cyberspaced]

Guys, that empty fan header on the other board - is it a standard one? Can I plug a 3 pin fan into it?
[/quote]

Yes, but use the 3 pins from the top, as the 4th (buttom) is PWM and will make both fans go to max RPM if connected by the 3 pin plug (;

[pedrosoft]

I tried to unplug the fan from connector and Antminer stop mining. Is it possible ? Could I replace the stock fan with another ? In this case could you please give link for buying it ?

Thanks

[CroverNo01]

Just an update to let Bitmain and folks know my order arrived today, 2 out of 3 units are the new design the 3rd one is older model.

The 2 new ones had little dust but nothing the hover could not fix

On initial boot up the 2 new model kept hitting 165 Gh/s I reboot a few times and now seems to be okay. The firmware is very heavy on usage unlike the older version.

Also for anyone that is making a future order I advise you to PAY UPS before delivery. This saves so much hassle about money on the door.

You can pay customs charge as soon as you have tracking number - UPS then give you a ref number also they email the local depot so the delivery driver knows you have paid.

Honest it has saved me so much hassle with UPS.

Anyway thanks again Bitmain - even though UPS delay still good miner and heats my home ahaha with the slight smell of hot PCB

Cheers    

[mvalley]

Did anyone who ordered on 2014-01-25 from America get a shipping notice? My earlier orders shipped but the Saturday order is still showing unshipped.

[CYPER]

Guys, that empty fan header on the other board - is it a standard one? Can I plug a 3 pin fan into it?

Yes, but use the 3 pins from the top, as the 4th (buttom) is PWM and will make both fans go to max RPM if connected by the 3 pin plug (;
[/quote]

I measured the voltage on all 4 pins:
1st (top): seems to be ground
2nd: 12V
3rd: 9V
4th: 0.7V

All seems good apart from the 3rd pin, which is sense, so is 9V an expected value?

[cyberspaced]

I tried to unplug the fan from connector and Antminer stop mining. Is it possible ? Could I replace the stock fan with another ? In this case could you please give link for buying it ?

Thanks

This will work:

http://www.ebay.co.uk/itm/Dell-Y4574-Dimension-5100-4715KL-04W-B56-12VDC-1-4A-120mm-x-25mm-Fan-/301042103669?lgeo=1&clk_rvr_id=559832067167&vectorid=229508

[Xer0]

one of the smaller caps (C609) came off

can i run without it or do i have to find some smd pro to resolder?

[dplusf]

2 ants delivered today. 49€ for Customs.
Now their hashing at p2pool.

[Tigggger]

Guys, that empty fan header on the other board - is it a standard one? Can I plug a 3 pin fan into it?

It's a 4-pin, I put arctic f12 pwm fans on all of mine. The connector is slightly different but just push it on and the white bit bends out of the way.

[CYPER]

Guys, that empty fan header on the other board - is it a standard one? Can I plug a 3 pin fan into it?

It's a 4-pin, I put arctic f12 pwm fans on all of mine. The connector is slightly different but just push it on and the white bit bends out of the way.

Can you please make a picture of the connector. Thank you.

[Delarock]

Did anyone who ordered on 2014-01-25 from America get a shipping notice? My earlier orders shipped but the Saturday order is still showing unshipped.

I have an order from the 24th and have not received a shipping notification. Delivery to USA.

[BuildTheFuture]

Further testing seems to show that the ones that will run overclocked are cgminer v 3.4.3-1 and the ones that came today are 3.8.5-1

Anyone else got any experiences like this?

Mine came with the latest firmware & cgminer 3.8.5. OCed fine, has been running several days now without a problem other than the asic status display bug. 12 hr pool stats showing average 204.64 GH/s.

[edgie13]

Guys, that empty fan header on the other board - is it a standard one? Can I plug a 3 pin fan into it?

It's a 4-pin, I put arctic f12 pwm fans on all of mine. The connector is slightly different but just push it on and the white bit bends out of the way.

Does the miner status page show the secondary fan's speed?  Thanks.

[Tigggger]

Can you please make a picture of the connector. Thank you.

I will next time I'm there

Does the miner status page show the secondary fan's speed?  Thanks.

No it reports it as 0

[baltimoreppc]

Did anyone who ordered on 2014-01-25 from America get a shipping notice? My earlier orders shipped but the Saturday order is still showing unshipped.

I have an order from the 24th and have not received a shipping notification. Delivery to USA.

I am still waiting for my order from 24th as well..no info yet..

[warhawk187]

Same here and still no response as tto my FREE raffle unit from GB6, snf still no updates as to my most recent order of 4.

[lynx887]

Did anyone who ordered on 2014-01-25 from America get a shipping notice? My earlier orders shipped but the Saturday order is still showing unshipped.

I have an order from the 24th and have not received a shipping notification. Delivery to USA.

I am still waiting for my order from 24th as well..no info yet..

Ordered on the 24th and still showing unshipped.

[baltimoreppc]

Did anyone who ordered on 2014-01-25 from America get a shipping notice? My earlier orders shipped but the Saturday order is still showing unshipped.

I have an order from the 24th and have not received a shipping notification. Delivery to USA.

I am still waiting for my order from 24th as well..no info yet..

Ordered on the 24th and still showing unshipped.

Yeah..I found mine at UPS MyChoice.  He shipped on 27th, Estimate Delivery date is this Weds.

[CooLTreW]

Did anyone who ordered on 2014-01-25 from America get a shipping notice? My earlier orders shipped but the Saturday order is still showing unshipped.

I have an order from the 24th and have not received a shipping notification. Delivery to USA.

I ordered one on the 20th and one on the 22nd.  Both will be delivered today (west coast USA).  Hope that helps with your approximate status.

[Biffa]

Guys, that empty fan header on the other board - is it a standard one? Can I plug a 3 pin fan into it?

It's a 4-pin, I put arctic f12 pwm fans on all of mine. The connector is slightly different but just push it on and the white bit bends out of the way.

Can you please make a picture of the connector. Thank you.

You can see it on the top left of this pic: