[Antminer S1 Sales open] Price changes daily, now 0.414 BTC for 180GH/s

[CroverNo01]

Okay time to settle this, let me show you the very nice email I got from bitmain thanking me for my idea for a support system  

I'm glad he is reading these posts

Where is the email? Thanks.

[edgie13]

Okay time to settle this, let me show you the very nice email I got from bitmain thanking me for my idea for a support system  

I'm glad he is reading these posts

Where is the email? Thanks.

Thanks.

[pedrosoft]

I was contacted by ups. There were problems at customs. UPS told me it has to deliver some documents to customs. In particular I require an invoice. WHAT DO I DO?


PLEASE HELP ME

Same with me. And furthermore they state that the declared price is too cheap for  the weight...I have provided the original invoice (BTC). We'll see what happens.

Ok

[wpgdeez]

They forgot to put my order on the truck today  Waiting for a callback to see if I can just go grab it from the depot. Took a day off work for this!

[s1lverbox]

Okay time to settle this, let me show you the very nice email I got from bitmain thanking me for my idea for a support system  

I'm glad he is reading these posts

Where is the email? Thanks.

I think if bitmain is so positive he should give green light or not for this.
What u done is similar what u was doing in the past.

Who are you to give support?  I think if bitmain will state clear that "use this system for support" then once approved will be something which can be considered as help.

At this moment i would suggest to stay away and keep asking bitmain directly for support.

[candoo]

One of my 6 ants is hashing with one blade only.

So its 90 ghash instead of 180.

I reconnected all the connectors and I know that the  PSU and eveything is fine.

Is there any other Idea what could be wrong? OR am I just having bad luck and that one is broken?

[klondike_bar]

One of my 6 ants is hashing with one blade only.

So its 90 ghash instead of 180.

I reconnected all the connectors and I know that the  PSU and eveything is fine.

Is there any other Idea what could be wrong? OR am I just having bad luck and that one is broken?

what does the status page show? Is the second board visible, are chips marked with x's?

take a multimeter and measure voltage on both blades - make sure 12V is present and look fro 1.1V across any inductors and capacitors. Its possible one of the 4 'segments' (possible the 1st from the left) has an issue and wont power its controls/chips

[Prelude]

Has anyone in Canada received any antminers since Bitmain reopened orders at the new BTC1.45 price?

[cad_cdn]

I am expecting it today according to UPS website.
(GTA)

Has anyone in Canada received any antminers since Bitmain reopened orders at the new BTC1.45 price?

[btmtb]

Received my order today, hashing away nicely. Had some funny business setting the wan/lan settings up, but its hashing fine. Anyone else notice that the new boards have PCIE connector sockets as well as the terminals? Makes using a Modular PSU much easier, no need to trim, strip, solder and screw as many extension cords. Big help, thanks BMT.

[s1lverbox]

One of my 6 ants is hashing with one blade only.

So its 90 ghash instead of 180.

I reconnected all the connectors and I know that the  PSU and eveything is fine.

Is there any other Idea what could be wrong? OR am I just having bad luck and that one is broken?

You can connect different ant to non working blade and check with other cable.
Or you can connect small pcb board with ethernet socket to non working blade and try that.

Whats happening when you connecting psu to miner?
Can you see other blade in luCi?

[Gamer67]

From the looks of things they apply thermal grease with a fire hose. Some of my new machines had it oozing out of screw holes and the bottom.

Anyone taken the heat sinks off and had a looky loo ?

[rob143]

I just bought one of these and had it up and running in about 2 minutes after I wiped off all the thermal compound. Really nice product, runs at 180 GH/s or better most of the time.

[pjcltd]

Hi
I placed an order on the 10th
paid on the 10th
order id is  00120140210120555264BhPRfp260673
and it still has not been shipped
common BITMAIN get it shipped out please.

[CroverNo01]

Hi
I placed an order on the 10th
paid on the 10th
order id is  00120140210120555264BhPRfp260673
and it still has not been shipped
common BITMAIN get it shipped out please.

Hi, Bitmain made a statement saying orders would be shipped out today, so please advise 48hours for tracking.

If you haven't got it by then just drop them an email or raise a ticket.

Bitmain team is working there socks of to get all these packages sent out on time. Yes there has been issues with invoices not being filled in correctly or some details missed.

This is only due to the sheer amount of rush they are in to keep us customers happy.

Stand by for update from Bitmain 

[elasticband]

taking on more work than you are capable of handling without causing negligence is not right for the people their mistakes are harming financially.....Greed!

edit: fixed for mistake

 

[CroverNo01]

taking on more work than you are capable of handling without causing negligence is not right for the people their mistakes are harming financially.....Greed!

 

Could not agree more with you, Bitmain could make a few improvements with SLA and quality checks before they leave the factory to ENSURE all documents are in place so 1. they don't get any complaints 2. keeps the customer happy 3. gives users respect and trust but hey I'm not the manger and if they are making shit loads of money why would you change that unless you are full off greed.

Bitmain could be one of the best company's to ever enter the scene. I think they will be working on this and from my email yesterday they are already working on a customer support system

Still I take my hats off to them for getting so many orders shipped out.

[death_hawk]

Has anyone in Canada received any antminers since Bitmain reopened orders at the new BTC1.45 price?

Mine is coming tomorrow (hopefully).

[jelin1984]

what paper i must show at customs?
and what i must say that is it?

what value?
 

[matt4054]

what paper i must show at customs?

Avoid showing them toilet paper or long smoking papers, that's a good start

and what i must say that is it?

what value?

The notorious "computer game gateway getway": it gets its way and getaway with it

$120, what else