[GPUC] GPU Coin | Mandatory Wallet Update

[Shintax]

this has to be a planned ninja launch... 1: fork it, 2: copy paste pandacoin, 3: delay it

[bananahunter67]

Hi guys been up all night myself and am rather tired.  I have already mined on pools and lost out on those coins on two occasions now myself due to the forks and hope this next attempt will be third time lucky.

I have decided to look at solo mining as I have always used pools until now.  I have made a bat file with this in it "cgminer.exe --scrypt -o 127.0.0.1:3344 -u username -p password -I 13 -w 256 -g 2 --gpu-reorder --thread-concurrency 8192 --gpu-engine 1060 --gpu-memclock 1500 --gpu-powertune 0 --temp-target 80 --auto-fan" That has been put with all my other bat files in the cgminer/vertminer folder.
Should that bat just be "cgminer.exe --scrypt -o 127.0.0.1:3344 -u username -p password" or are the other settings not a issue, or is that even right?

I have also made a .CONF file that is called gpucoin.CONF and that should be put in the appdata/roaming folder with the dat file I gather.

rpcuser=username
rpcpassword=password
server=1
daemon=1
addnode=70.161.219.122
addnode=91.125.248.210
addnode=69.8.51.75:6858
addnode=81.229.246.124:6858
addnode=99.28.127.102:64132
addnode=85.214.95.230:6858
gen=0
listen=0
port=3344
rpcport=3344
rpcallowip=*
rpcallowip=localhost

Is this correct?

Then if i get this right i just start the bat while the wallet is running and i should receive payments?

Any help is appreciated, thanks in advance.

YOu have specified rpcallowip=*
rpcallowip=localhost
twice.
Leave just 127.0.0.1
Settings in bat file are OK, of course, if you not speicfy them, it will take them from the config.
However, pool settings (in your case, solo), MUST be set from the bat file, not the config.
And dont forget to start the wallet as a server first. (command line, path to wallet, and add to this -server).

[alphateam]

Hi, guys, i'm just wake up.

So second launch failed?
Another launch when?

thx

[rygamble]

Hi, guys, i'm just wake up.

So second launch failed?
Another launch when?

thx

2nd and 3rd launch failed. 4th launch to fail at some point in the near future.

[LuckyLuke]

Hi, guys, i'm just wake up.

So second launch failed?
Another launch when?

thx

nobody knows....

[Kestrel71]

EDIT

Been replied too.

[leewilson]

What pool do I leave my miners pointed whilst I sleep?

Sack staying up till 4am on a weekday for this...

I point them at RevolutionCoin to protest against the continuing trend of failed launches.

I tried to let you know.  I hope some of you took the advice.  

You know the best way to get them back?  

Don't mine the coin...mine something different.
Don't post in the thread.
Don't ask them to re-re-re-relaunch.
Just leave and never look back.

The university coin dev cannot be an ivory tower, far away from the society community, removed from the practical accomplishments of the Revolution. If such an attitude is maintained, the university coin dev will continue giving our society community lawyers failed launches that we do not need. -CHE Guevara

This is wise, bro.

This type of situation is what created RevolutionCoin. A multiple failed launch dev put up the source for the third re-launch and tried to say it was the old source because he forgot to premine it.  Someone in the community mined the genesis and the community took it and ran. The rest is history.

It is now completely run by the community. You should check it out.

[sq]

http://gpuscanner.qemulab.com/

It's already being mined... bs devs... release the f'n wallet.

They're minig the old fork

They just want to make us tired ! ;p

But we're in Europe, it's 9 A.M.

yeah true stroy where are you from?

Poland

Prevc vs Stoch 

[XbladeX]

Fack that shit i am in ... i had hope that will happened few times:D for lol

[Shintax]

Hi guys been up all night myself and am rather tired.  I have already mined on pools and lost out on those coins on two occasions now myself due to the forks and hope this next attempt will be third time lucky.

I have decided to look at solo mining as I have always used pools until now.  I have made a bat file with this in it "cgminer.exe --scrypt -o 127.0.0.1:3344 -u username -p password -I 13 -w 256 -g 2 --gpu-reorder --thread-concurrency 8192 --gpu-engine 1060 --gpu-memclock 1500 --gpu-powertune 0 --temp-target 80 --auto-fan" That has been put with all my other bat files in the cgminer/vertminer folder.
Should that bat just be "cgminer.exe --scrypt -o 127.0.0.1:3344 -u username -p password" or are the other settings not a issue, or is that even right?

I have also made a .CONF file that is called gpucoin.CONF and that should be put in the appdata/roaming folder with the dat file I gather.

rpcuser=username
rpcpassword=password
server=1
daemon=1
addnode=70.161.219.122
addnode=91.125.248.210
addnode=69.8.51.75:6858
addnode=81.229.246.124:6858
addnode=99.28.127.102:64132
addnode=85.214.95.230:6858
gen=0
listen=0
port=3344
rpcport=3344
rpcallowip=*
rpcallowip=localhost

Is this correct?

Then if i get this right i just start the bat while the wallet is running and i should receive payments?

Any help is appreciated, thanks in advance.

YOu have specified rpcallowip=*
rpcallowip=localhost
twice.
Leave just 127.0.0.1
Settings in bat file are OK, of course, if you not speicfy them, it will take them from the config.
However, pool settings (in your case, solo), MUST be set from the bat file, not the config.
And dont forget to start the wallet as a server first. (command line, path to wallet, and add to this -server).

[leewilson]

CAN OAKPOOL PLEASE RUN A COIN TO SWITCH OVER FROM ON THE SITE SO WE CAN LOG IN AND GET SOME SLEEP

They should add RevolutionCoin

[ByronP]

can we now officially call this the worst launch in history?

[LuckyLuke]

http://puu.sh/7iszK.png

 

[sq]

can we now officially call this the worst launch in history?

lets vote

[theking]

[turboseed]

+100000000000 Votes...

[znakistu]

so it's safe to mine now?

[Amph]

are these relaunches made to create hype or what?

[Kestrel71]

Hi guys been up all night myself and am rather tired.  I have already mined on pools and lost out on those coins on two occasions now myself due to the forks and hope this next attempt will be third time lucky.

I have decided to look at solo mining as I have always used pools until now.  I have made a bat file with this in it "cgminer.exe --scrypt -o 127.0.0.1:3344 -u username -p password -I 13 -w 256 -g 2 --gpu-reorder --thread-concurrency 8192 --gpu-engine 1060 --gpu-memclock 1500 --gpu-powertune 0 --temp-target 80 --auto-fan" That has been put with all my other bat files in the cgminer/vertminer folder.
Should that bat just be "cgminer.exe --scrypt -o 127.0.0.1:3344 -u username -p password" or are the other settings not a issue, or is that even right?

I have also made a .CONF file that is called gpucoin.CONF and that should be put in the appdata/roaming folder with the dat file I gather.

rpcuser=username
rpcpassword=password
server=1
daemon=1
addnode=70.161.219.122
addnode=91.125.248.210
addnode=69.8.51.75:6858
addnode=81.229.246.124:6858
addnode=99.28.127.102:64132
addnode=85.214.95.230:6858
gen=0
listen=0
port=3344
rpcport=3344
rpcallowip=*
rpcallowip=localhost

Is this correct?

Then if i get this right i just start the bat while the wallet is running and i should receive payments?

Any help is appreciated, thanks in advance.

YOu have specified rpcallowip=*
rpcallowip=localhost
twice.
Leave just 127.0.0.1
Settings in bat file are OK, of course, if you not speicfy them, it will take them from the config.
However, pool settings (in your case, solo), MUST be set from the bat file, not the config.
And dont forget to start the wallet as a server first. (command line, path to wallet, and add to this -server).

I assumed you needed the port number after the 127.0.0.1 guess i was wrong .  I also assumed the server=1 line was for turning the wallet into the server.  so much to learn it would seem.  Thanks I'll try to get it working.

[Gema]

can we now officially call this the worst launch in history?

lets vote

+1 But I still wait to mine. Fantastic fail!