CryptoDredge 0.27.0 — CUDA Miner

[Divinity666]

I get on avg. 5800mhs@197wt with 1080Ti's and 4520mhs@152wt with 1080's in lyra2z and 77.5mhs@195wt with 1080Ti's and 58.5@148wt with 1080's in lyra2rev2.

[Josefonaut]

Excellent work on improving CryptoDredge.
Had used version 0.40 to mine neoscrypt,

Just downloaded ver 0.91 to compare hashrates on phi2 between it z-enemy 1.20 32bit

On my 1080  hashrate rose from 5.1mh to 6.8mh (pl 100 mem +450 core +80)
On my 1080ti hashrate rose from 7.2mh to 9.0mh(pl 120 mem +450 core +150) (9.2mh with ethenlargementpill and mem +290 but miner was unstable)

3.5mh increase in performance over two cards is fantastic.
I tip my hat to you good sir 

[MiningTaken]

Hi cryptodredge dev. Please help.
I try to change the intensity for Phi2 algo with CryptoDredge 0.9.1 (Windows 10).
I set "-i 5", but the miner still use intensity "6" for my GTX1070Ti.
Is this a bug? Need your advise. Thank you.

[ggillies]

Hi cryptodredge dev. Please help.
I try to change the intensity for Phi2 algo with CryptoDredge 0.9.1 (Windows 10).
I set "-i 5", but the miner still use intensity "6" for my GTX1070Ti.
Is this a bug? Need your advise. Thank you.

Try "--intensity=5"

[MiningTaken]

Hi cryptodredge dev. Please help.
I try to change the intensity for Phi2 algo with CryptoDredge 0.9.1 (Windows 10).
I set "-i 5", but the miner still use intensity "6" for my GTX1070Ti.
Is this a bug? Need your advise. Thank you.

Try "--intensity=5"

Yes, I tried that and it worked. Thank you!
Yet miner still crashed though (even though it runs well with Lyra2z with the same OC).
Well, I guess I need to lower the OC.

[HiddenA]

Periodically I get an error on Lyra2z - "The semaphore timeout period has expired"
With what it can be connected? Other miners do not issue such errors.

[thespycry]

Just a question. I am getting about 6 MH/s in lyra2z on the 1080 TI.. but the power draw is insane.. about 250 watt
anyone else ?

[netto7]

Just a question. I am getting about 6 MH/s in lyra2z on the 1080 TI.. but the power draw is insane.. about 250 watt
anyone else ?

1080ti normally it use around 250 watt per card

[thespycry]

yeah but lyra2z was always was drawing about 30 % of the gpu.. not more.. with older ccminers (2017)

Just a question. I am getting about 6 MH/s in lyra2z on the 1080 TI.. but the power draw is insane.. about 250 watt
anyone else ?

1080ti normally it use around 250 watt per card

[Divinity666]

Just a question. I am getting about 6 MH/s in lyra2z on the 1080 TI.. but the power draw is insane.. about 250 watt
anyone else ?

I get ~5.9MH\s @ 197Wt

[thespycry]

Just a question. I am getting about 6 MH/s in lyra2z on the 1080 TI.. but the power draw is insane.. about 250 watt
anyone else ?

I get ~5.9MH\s @ 197Wt

what settings if i may ask? thank you

i was trying 75 TPD, 85 - 130 Core and 0 Mem

[netto7]

yeah but lyra2z was always was drawing about 30 % of the gpu.. not more.. with older ccminers (2017)

Just a question. I am getting about 6 MH/s in lyra2z on the 1080 TI.. but the power draw is insane.. about 250 watt
anyone else ?

1080ti normally it use around 250 watt per card

draw more power 30% but you mine faster around 80%

ccminer mine lyra2z around 3.5MH for 1080ti  use cryptodredge it have 6.1MH

[LordPower]

I get on Lyra2v2  68MH/s on 1080TI with CCminer, and Dredge.0.9.1 I get 74-75MH/s
on 1060TI I get 21.5-22mh/s with CCMiner and Dredge I get 25mh/s

[Dr_Victor]

I get on Lyra2v2  68MH/s on 1080TI with CCminer, and Dredge.0.9.1 I get 74-75MH/s
on 1060TI I get 21.5-22mh/s with CCMiner and Dredge I get 25mh/s

What is it 1060TI?

[Divinity666]

what settings if i may ask? thank you

i was trying 75 TPD, 85 - 130 Core and 0 Mem

I use curve OC, though for each card curve is a bit different cos cards have different OC potential, but not by much. Memory is  set to 5003(-502mhz). And then I adjust power consumption using PL, e.g. for Stris OC's 72%, for Gigabyte OC's its 79%. So you gotta tune your cards individually, my settings might not work for you. If you are mining only lyra2z  algorithm you dont need to limit PL at all, just find proper vcore\clock combination that will make ur card's draw below 200wt. It's just I mine on Nicehash, so I had to make curves for 3 algos for my cards: x16r, lyra2z\rev2, and I also got to use PL hence in lyra2z I'll get more powerdraw (though also higher h\r) if I allow 1080ti's to mine at max clock my curve has. With PL they usually stick to 825-831mV and their respective clocks.

ps Here is example of a curve of 1 of my strix's card:

I get on Lyra2v2  68MH/s on 1080TI with CCminer, and Dredge.0.9.1 I get 74-75MH/s

I get a bit higher h\r - 76-77Mh\s with power draw around 195Wt.

[ztaz]

0.9.2 - phi2 - on 1080 - 7,5-7,8 Mh/s    

[Dr_Victor]

Are there any speed-up's in 0.9.2?

[Dr_Victor]

# Release 0.9.2 - (September 26, 2018)

 * New CryptoNightSaber (BitTube) algorithm
 * Improve Allium and Phi2 for 1070, 1070 Ti, 1080, 1080 Ti
 * Allow to set intensity per GPU
 * Fix failover mechanism
 * Disable miner to auto-start after system restart
 * Add crash reporting mechanism. Check Readme for more information

[papacheal]

# Release 0.9.2 - (September 26, 2018)

 * New CryptoNightSaber (BitTube) algorithm
 * Improve Allium and Phi2 for 1070, 1070 Ti, 1080, 1080 Ti
 * Allow to set intensity per GPU
 * Fix failover mechanism
 * Disable miner to auto-start after system restart
 * Add crash reporting mechanism. Check Readme for more information

Not sure if others are seeing similar behavior, but the phi2 algo on 0.9.2 (all Windows CUDA builds, using 411.63 drivers) seems to bias performance on GPU0 vs. all the other GPUs on two different rigs.

On CD 9.1, I calculated a 5% delta in performance between GPU0 and GPU1 (both identical 1080ti) for phi2. On CD 9.2, this jumps to over 12%. No OC, stock PL.

After benchmarking all 6 x 1080ti in a rig, GPU0 always ends up over 1 MH/s better than all the others but only on phi2. Tests on allium, neoscrypt and lyra2z all show expected deltas in performance between GPUs.

It almost feels like an optimization was applied in code for phi2 specifically, but they forgot to apply it to any GPU past the first.

[trucobit]

The new RTX series from nvidia went on sale, I already have RIGs with these cards and like me too many miners with large farms.

It would be convenient a version with optimization for RTX, since it uses a different driver, cuda 10, different memory etc ...

You can get great improvements to HASH when there is this update.

Right now there is no miner optimized for RTX, and I guess the first one to do it, suddenly get many miners hit using their software.

Right now Cryptodedge works in RTX but it makes it unstable and not with improvements in HASH. Other miners like z-enemy still not being optimized, get good numbers

I hope soon an update that takes into account the RTX