Antminer T17 - S17

[kekeck33]

Can I use control board from T17+ in S17pro. They don't look the same.

[BitMaxz]

Depending on the control board model, it is best to check the control board manually by disassembling the unit.

If it XiLinx control board I thinly it should be compatible you just need to reflash it with exact firmware.

[philipma1957]

if you are usa based I have a s17pro board.

also. this person is a good seller


https://www.ebay.com/itm/266837501927?

[kekeck33]

Depending on the control board model, it is best to check the control board manually by disassembling the unit.

If it XiLinx control board I thinly it should be compatible you just need to reflash it with exact firmware.

T17+ control boar Bitmain AMCB07_4x1_4F_VER2.1
S17pri control board AMCB07_3x1_2F_VER1.4

I like to use cb prom T17+ in S17pro

[kekeck33]

C9ntrol board from T17+ is not working in S17pro (firmware updated)

[BitMaxz]

C9ntrol board from T17+ is not working in S17pro (firmware updated)

It will not work if you use stock firmware; instead, you must flash it with modded or custom firmware, such as Braiins OS, if you want the hashboard to detect, as each hashboard has a unique serial number. The hashboard will not recognize the serial if it is not registered on the control board.

To bypass that issue, you need to boot it or flash the control board with Braiins OS to make them work.

Check the firmware from this link below

- https://braiins.com/os-firmware/download