[XMR] Monero - A secure, private, untraceable cryptocurrency

[owlcatz]

Ive sorted out my wallet problems, but boy this wallet takes ages to sync!

Is there any way to speed it up?

im on fibre. I heard the chain is about 20GB?

Ive had the daemon running for two days now says its synced 689596 and i still have to get to block 1299530!

I cant sweep the dust until this has synced.

I can sync it in a day or so with an SSD. If you're using spinning disks, expect a few days I guess, sorry....

[nzminer]

Ive sorted out my wallet problems, but boy this wallet takes ages to sync!

Is there any way to speed it up?

im on fibre. I heard the chain is about 20GB?

Ive had the daemon running for two days now says its synced 689596 and i still have to get to block 1299530!

I cant sweep the dust until this has synced.

I can sync it in a day or so with an SSD. If you're using spinning disks, expect a few days I guess, sorry....

I wouldnt think an SSD would really make any difference, its the internet connection at the end of the day that determines how fast the chain can be downloaded.

[aminorex]

Is there any way to speed it up?

im on fibre. I heard the chain is about 20GB?

Ive had the daemon running for two days now says its synced 689596 and i still have to get to block 1299530!

I cant sweep the dust until this has synced.

Mine is 15gb, 12gb after compression.  I would offer a copy, but it would take longer than that (i.e. your fibre sync) to upload to an s3 bucket over my (WiFi and docsis 3 cable modem) Time Warner residential internet. (Kids these days!)

*Note to self: Check Fios local availability again on Monday.*

[ozkraut]

Ive sorted out my wallet problems, but boy this wallet takes ages to sync!

Is there any way to speed it up?

im on fibre. I heard the chain is about 20GB?

Ive had the daemon running for two days now says its synced 689596 and i still have to get to block 1299530!

I cant sweep the dust until this has synced.

I can sync it in a day or so with an SSD. If you're using spinning disks, expect a few days I guess, sorry....

I wouldnt think an SSD would really make any difference, its the internet connection at the end of the day that determines how fast the chain can be downloaded.

No. There is a lot of processing of the chain by the client apart from download so read/write speed of the hdd has a marked impact

[nioc]

Took a break from bct but ofc not from Monero

good2cu 

[ghuang168]

Ive sorted out my wallet problems, but boy this wallet takes ages to sync!

Is there any way to speed it up?

im on fibre. I heard the chain is about 20GB?

Ive had the daemon running for two days now says its synced 689596 and i still have to get to block 1299530!

I cant sweep the dust until this has synced.

you can download the blockchain and use the monero-blockchain-import.exe import it
that can save a lot of your time

[cordlesslake]

monero is a gret project !

[Kryptowerk]

I downloaded the latest c.0.10.3.1 client. Finally the blockchain is not stuck at block 1288639 anymore.

But I still get a ton of COMMAND_HANDSHAKE Failed messages. Is there any way to speed up Daemon syncing?

[explorer]

Took a break from bct but ofc not from Monero

good2cu 

Its about time 

[Hueristic]

Took a break from bct but ofc not from Monero

good2cu 

Missed yah.

[nzminer]

Can someone help me here?

Ive finally synced my blockchain after 4 solid days and now when i come to running a sweep_unmixable command, its saying mixin too low.

Any ideas whats wrong?


TIA

[dEBRUYNE]

Can someone help me here?

Ive finally synced my blockchain after 4 solid days and now when i come to running a sweep_unmixable command, its saying mixin too low.

Any ideas whats wrong?


TIA

Could you try the sweep_all command?

[nzminer]

Can someone help me here?

Ive finally synced my blockchain after 4 solid days and now when i come to running a sweep_unmixable command, its saying mixin too low.

Any ideas whats wrong?


TIA

Could you try the sweep_all command?

I have since ran a sweep_all command, and it asked for an address, so i provided it with mine.

I assume this was correct?

It looked like it went through OK, but i have the feeling some coins are still unmixable.

[saddambitcoin]

Can someone help me here?

Ive finally synced my blockchain after 4 solid days and now when i come to running a sweep_unmixable command, its saying mixin too low.

Any ideas whats wrong?


TIA

Could you try the sweep_all command?

I have since ran a sweep_all command, and it asked for an address, so i provided it with mine.

I assume this was correct?

It looked like it went through OK, but i have the feeling some coins are still unmixable.

sweep_all should empty the entire balance of your wallet to the address you send it to (which in your case, should be your own).

if the transaction went through there will be nothing left unmixable.

[nzminer]

Can anyone tell me whats wrong here?

I cant get this jolly thing to work.

im trying to send to poloniex

[wallet 43xU1y]: transfer 0 47sghzufGhJJDQEbScMCwVBimTuq6L5JiRixD8VeGbpjCTA12noX
mi4ZyBZLc99e66NtnKff34fHsGRoyZk3ES1s1V4QVcB 5.1 2dab222e9540062809db12c601ad7472
8b7bbbd12254828084e37394f68680e7

Error: unexpected error: Error! What is c if cols = 1!

[ozkraut]

Can anyone tell me whats wrong here?

I cant get this jolly thing to work.

im trying to send to poloniex

[wallet 43xU1y]: transfer 0 47sghzufGhJJDQEbScMCwVBimTuq6L5JiRixD8VeGbpjCTA12noX
mi4ZyBZLc99e66NtnKff34fHsGRoyZk3ES1s1V4QVcB 5.1 2dab222e9540062809db12c601ad7472
8b7bbbd12254828084e37394f68680e7

Error: unexpected error: Error! What is c if cols = 1!

Not sure 0 mixin is valid. I used 3 transferring to polo with no issues eg

[wallet 43xU1y]: transfer 3 47sghzufGhJJDQEbScMCwVBimTuq6L5JiRixD8VeGbpjCTA12noX
mi4ZyBZLc99e66NtnKff34fHsGRoyZk3ES1s1V4QVcB 5.1 2dab222e9540062809db12c601ad7472
8b7bbbd12254828084e37394f68680e7

[nzminer]

Can anyone tell me whats wrong here?

I cant get this jolly thing to work.

im trying to send to poloniex

[wallet 43xU1y]: transfer 0 47sghzufGhJJDQEbScMCwVBimTuq6L5JiRixD8VeGbpjCTA12noX
mi4ZyBZLc99e66NtnKff34fHsGRoyZk3ES1s1V4QVcB 5.1 2dab222e9540062809db12c601ad7472
8b7bbbd12254828084e37394f68680e7

Error: unexpected error: Error! What is c if cols = 1!

Not sure 0 mixin is valid. I used 3 transferring to polo with no issues eg

[wallet 43xU1y]: transfer 3 47sghzufGhJJDQEbScMCwVBimTuq6L5JiRixD8VeGbpjCTA12noX
mi4ZyBZLc99e66NtnKff34fHsGRoyZk3ES1s1V4QVcB 5.1 2dab222e9540062809db12c601ad7472
8b7bbbd12254828084e37394f68680e7

OK i was reaing that you could do 0 mixin to speed up.
Anyway, with mixin 3 i get:

Error: not enough outputs for specified mixin_count = 3:
output amount = 0.004269227661, found outputs to mix = 1
output amount = 0.002961879501, found outputs to mix = 1
output amount = 0.002852539795, found outputs to mix = 1
output amount = 0.004356796150, found outputs to mix = 1

Im sure its a dust issue.

Sweep_unmixable gives me this error:

mixin too low.

If i do a sweep_all to a different address, i get the same error output amount = *.*********, found outputs to mix =1 error like above scrolling down the page.


I managed to send 2 XMR to poloniex in a few broken down transactions, but i cant send the rest. any ideas??

[cAPSLOCK]

You have some unmixable dust.  You can send all but that dust.  How much do you intend to sell... perhaps I will buy it.

[nzminer]

You have some unmixable dust.  You can send all but that dust.  How much do you intend to sell... perhaps I will buy it.

Ive only got about 2.9 XMR left in the wallet.

Problem is how on earth do you spend it?
Only way to send it is if i send someone the wallet.

Your welcome to it if you want.

[smooth]

Sweep_unmixable gives me this error:

mixin too low.

This should not happen, is a bug, and should be reported in github if it hasn't been already.

It is supposed to be possible to send pre-existing unmixable outputs with mixin 0. Therefore no mixin would be 'too low'. It can't be guaranteed that you have enough value in the wallet to pay the necessary fees. That's a different issue though, and should not result in the above error. Again, please report the bug.

Report here: https://github.com/monero-project/monero/issues

Click "New issue" and as completely and accurately as possible describe what is going on. Do not include any private information as those issues are public.