[Minera v0.9.1] Your next mining dashboard - Antminer/CPUminer/CGminer/BFGminer

[n00bminer]

v7.0 has been flawless so I have not upgraded.  Suddenly today, this started happening


cleared cache, saved settings, different computer, rebooted pi to no avail

Raw stats shows a different error:

[jenia1]

sorry for the stupid question. but does this also work with other ascis such as D3 and L3+? or only with bitcoin mining asics?

[michelem]

v7.0 has been flawless so I have not upgraded.  Suddenly today, this started happening


cleared cache, saved settings, different computer, rebooted pi to no avail

Raw stats shows a different error:

I just fixed it. You need to update the code.

https://github.com/getminera/minera/commit/05cf2ede9674e2157cac96b906263fc655bbb3a4

[michelem]

sorry for the stupid question. but does this also work with other ascis such as D3 and L3+? or only with bitcoin mining asics?

No it doesn't work with L3/D3.
It doesn't work neither with S9 because all of these miners doesn't use Cgminer.

[michelem]

Guys

need help, cannot figure it out why.

Raspberry Pi 3 Model B
2017-09-07-raspbian-stretch

Followed steps as per getMinera website, all the way until its fully installed.
however, i failed to connect to the URL


SSH is enabled and the default password for the 'pi' user has not been changed.
This is a security risk - please login as the 'pi' user and type 'passwd' to set a new password.

all: /var/www/minera/build_miner.sh: Permission denied
DONE! Minera is ready!

Open the URL: http://192.168.0.11/minera/

And happy mining!

Why don't you flash your SD card with latest Minera image (https://getminera.com/download/latest) instead trying to manual install it?

What command do you use to manual install it? It requires "sudo".

yes, its done by flashing using Etcher. Using Win32DiskImager killed my other SD
yes, installation is smooth, as per Instruction on Minera webpage. Of course using SUDO, else the installation will fail

Now i stuck. Trying to login using LAN (Wifi also same issue) at the URL: http://192.168.0.11/minera/ , it failed.
IP scanning shows correct IP of the Pi.

Tried searching the net, no go.

If you flashed the SD Card with the Minera image you DON'T need to install anything else. Just connect to the RPI IP.
f you can't connect we need more info.

i tested 3 SDcards today
1.One download image direct from Minera
2. One installed 2017-09-07-raspbian-stretch, then followed the step by step guide on Minera website
3. One installed Noobs, internet working fine. No error. Youtube is smooth [to ensure that Raspberry Pi3 is good]

Both SD (1,2) gave me same error. Unable to connect

I have same problem, the problem is the IP shown in monitor is not totally correct.
I use ip scanner to find the correct one (yes, my router use DHCP)

First of all, what device are you trying? Ethernet or Wifi?

[jenia1]

sorry for the stupid question. but does this also work with other ascis such as D3 and L3+? or only with bitcoin mining asics?

No it doesn't work with L3/D3.
It doesn't work neither with S9 because all of these miners doesn't use Cgminer.

thanks for that. mind also telling me the difference between
Cminer/CGminer/BFGminer with regards to asics/gpu rigs? and recommend a tool for a farm of both rigs and various asics?

[Astrali]

i'm missing the live-log button .. where is it? O_o   Version 0.8.0 - it's been there before the update!

[n00bminer]

sorry for the stupid question. but does this also work with other ascis such as D3 and L3+? or only with bitcoin mining asics?

L3 uses a version of cgminer but the operate system's footprint is small (openembedded); there is no room on the storage device for much customization.

[michelem]

Minera 0.8.1 released

The new 0.8.1 version is ready to be updated. There are bug fixes and a completely new way to remove ads.
Now you can remove ads leaving your browser mining for Minera.
In the settings page you'll find a new button "Start/Stop browser mining", if you start it Minera will be automatically ads-free and when you will look at Minera from any PC/Mac browser, it will start mining for Minera with a small part of your idle CPU.
It works with https://coin-hive.com/ a Javascript library to mine from a browser.

Hope you like it.

PS
Web update should work (from 0.8.0 to 0.8.1, previous version still not working)
Image file is on its way, I will update you when ready.

[zamans98]

I looked at your Photo. IPv6 is not assigned   ::1

well good sir, i don't have IPv6, its only IPv4. Doesn;t make any different. on Standard Noobs, i can login just fine. Youtubing all day long.
but the complete build image is FUBAR.

[zamans98]

Guys

need help, cannot figure it out why.

Raspberry Pi 3 Model B
2017-09-07-raspbian-stretch

Followed steps as per getMinera website, all the way until its fully installed.
however, i failed to connect to the URL


SSH is enabled and the default password for the 'pi' user has not been changed.
This is a security risk - please login as the 'pi' user and type 'passwd' to set a new password.

all: /var/www/minera/build_miner.sh: Permission denied
DONE! Minera is ready!

Open the URL: http://192.168.0.11/minera/

And happy mining!

Why don't you flash your SD card with latest Minera image (https://getminera.com/download/latest) instead trying to manual install it?

What command do you use to manual install it? It requires "sudo".

yes, its done by flashing using Etcher. Using Win32DiskImager killed my other SD
yes, installation is smooth, as per Instruction on Minera webpage. Of course using SUDO, else the installation will fail

Now i stuck. Trying to login using LAN (Wifi also same issue) at the URL: http://192.168.0.11/minera/ , it failed.
IP scanning shows correct IP of the Pi.

Tried searching the net, no go.

If you flashed the SD Card with the Minera image you DON'T need to install anything else. Just connect to the RPI IP.
f you can't connect we need more info.

i tested 3 SDcards today
1.One download image direct from Minera
2. One installed 2017-09-07-raspbian-stretch, then followed the step by step guide on Minera website
3. One installed Noobs, internet working fine. No error. Youtube is smooth [to ensure that Raspberry Pi3 is good]

Both SD (1,2) gave me same error. Unable to connect

I have same problem, the problem is the IP shown in monitor is not totally correct.
I use ip scanner to find the correct one (yes, my router use DHCP)

First of all, what device are you trying? Ethernet or Wifi?

Hard-Wired, ETH, IP v4 for sure

[Valnurat]

NO SYSTEM IP SHOWN

Hi,

Hope someone can help. I am trying to intall Minera on a Raspberry Pi 3 and I have installed the img on an SD card. The img loads and I can login but no system IP is shown and nor does the Pi show in the list of attached devices on my router.

I have booted the pi using Raspbian (NOOBS) and this connects to WiFi fine (though I had to disable IPV6).

I have tried fiddling with dhcp settings, assigning a static IP, disabling IPV6, etc. but no luck. Any ideas?

I am pretty new to Linux so it's a little painful at the mo.

Cheers in advance for any help.

Are you trying to work with Wifi or Ethernet?

WiFi:-)

Please check this https://github.com/getminera/minera/wiki/Configure-Wifi
And this: https://www.raspberrypi.org/documentation/configuration/wireless/wireless-cli.md

I have installed the new image and I can't connect with WiFi even though I following the link above.
When I want to edit /etc/network/interfaces I see this:

# interfaces( 5 ) file used be ifup( 8 ) and ifdoen( 8 )

# Please note that this file is written to be used with dhcpcd
# For static IP, consult /etc/dhcpcd.conf and 'man dhcpcd.conf'

# Include files from /etc/network/interfaces.d
source-directory /etc/network/interfaces.d

I don't see that in the link

[michelem]

NO SYSTEM IP SHOWN

Hi,

Hope someone can help. I am trying to intall Minera on a Raspberry Pi 3 and I have installed the img on an SD card. The img loads and I can login but no system IP is shown and nor does the Pi show in the list of attached devices on my router.

I have booted the pi using Raspbian (NOOBS) and this connects to WiFi fine (though I had to disable IPV6).

I have tried fiddling with dhcp settings, assigning a static IP, disabling IPV6, etc. but no luck. Any ideas?

I am pretty new to Linux so it's a little painful at the mo.

Cheers in advance for any help.

Unfortunately new Raspbian release has new way to connect to WiFi. I have to investigate and update the link

Are you trying to work with Wifi or Ethernet?

WiFi:-)

Please check this https://github.com/getminera/minera/wiki/Configure-Wifi
And this: https://www.raspberrypi.org/documentation/configuration/wireless/wireless-cli.md

I have installed the new image and I can't connect with WiFi even though I following the link above.
When I want to edit /etc/network/interfaces I see this:

# interfaces( 5 ) file used be ifup( 8 ) and ifdoen( 8 )

# Please note that this file is written to be used with dhcpcd
# For static IP, consult /etc/dhcpcd.conf and 'man dhcpcd.conf'

# Include files from /etc/network/interfaces.d
source-directory /etc/network/interfaces.d

I don't see that in the link

[Valnurat]

NO SYSTEM IP SHOWN

Hi,

Hope someone can help. I am trying to intall Minera on a Raspberry Pi 3 and I have installed the img on an SD card. The img loads and I can login but no system IP is shown and nor does the Pi show in the list of attached devices on my router.

I have booted the pi using Raspbian (NOOBS) and this connects to WiFi fine (though I had to disable IPV6).

I have tried fiddling with dhcp settings, assigning a static IP, disabling IPV6, etc. but no luck. Any ideas?

I am pretty new to Linux so it's a little painful at the mo.

Cheers in advance for any help.

Unfortunately new Raspbian release has new way to connect to WiFi. I have to investigate and update the link

Are you trying to work with Wifi or Ethernet?

WiFi:-)

Please check this https://github.com/getminera/minera/wiki/Configure-Wifi
And this: https://www.raspberrypi.org/documentation/configuration/wireless/wireless-cli.md

I have installed the new image and I can't connect with WiFi even though I following the link above.
When I want to edit /etc/network/interfaces I see this:

# interfaces( 5 ) file used be ifup( 8 ) and ifdoen( 8 )

# Please note that this file is written to be used with dhcpcd
# For static IP, consult /etc/dhcpcd.conf and 'man dhcpcd.conf'

# Include files from /etc/network/interfaces.d
source-directory /etc/network/interfaces.d

I don't see that in the link

?

[royke]

I have setup Minera on a Raspberry Pi with some Gridseed 5chip scrypt miners using CGMiner Maxl. Everything is working great, only I have setup that Minera should reboot every  2 hours, now when this happens the miner itself is not booting up. Is there something I need to change to get this fixed?

[HomeboySE]

v7.0 has been flawless so I have not upgraded.  Suddenly today, this started happening
https://image.prntscr.com/image/JESsa4y4QEWS5ZfCHTRJXA.png

cleared cache, saved settings, different computer, rebooted pi to no avail

Raw stats shows a different error:

I just fixed it. You need to update the code.

https://github.com/getminera/minera/commit/05cf2ede9674e2157cac96b906263fc655bbb3a4

Have still the same Problem with 0.8.1

How do i update the code ?

PS.
Minera shows me:

Severity: Notice

Message: json_decode(): integer overflow detected

Filename: models/util_model.php

Line Number: 1131

[biggee]

I've got Minera installed on 3 separate Pi's, one running Blades, One running Zeus' & one running Gridseed Orbs.

In the last few days ALL of them have stopped working.

The dashboard doesn't load on any of them anymore, just constantly spins like it's updating.

One just hangs when I try to save pool settings.

One refuses to start the miner.

One will mine for about 30 minutes then disconnects and freezes up.

What is going on here? Did something break?

P.S. I updated one of them to the latest version 0.8.1 and it's exactly the same, nothing works.

EDIT - Updating them all to 0.8.1 now, going to try and reset everything, if they don't work it's back to a clean rasp image and running the miners natively.

As great as Minera was, over the past few months it seems to be getting more and more sluggish, seems to be way overloaded with unnecessary features that really slow everything down.

EDIT II

Yep, getting the same error as mentioned above, just couldn't see it as the CSS was hiding it..


A PHP Error was encountered

Severity: Notice

Message: json_decode(): integer overflow detected

Filename: models/util_model.php

Line Number: 1131

So is this dusted now then?

[biggee]

Minera 0.8.1 released

The new 0.8.1 version is ready to be updated. There are bug fixes and a completely new way to remove ads.
Now you can remove ads leaving your browser mining for Minera.
In the settings page you'll find a new button "Start/Stop browser mining", if you start it Minera will be automatically ads-free and when you will look at Minera from any PC/Mac browser, it will start mining for Minera with a small part of your idle CPU.
It works with https://coin-hive.com/ a Javascript library to mine from a browser.

Hope you like it.

PS
Web update should work (from 0.8.0 to 0.8.1, previous version still not working)
Image file is on its way, I will update you when ready.

So this is whats screwed it all up then?

[Astrali]

I've got Minera installed on 3 separate Pi's, one running Blades, One running Zeus' & one running Gridseed Orbs.

In the last few days ALL of them have stopped working.

The dashboard doesn't load on any of them anymore, just constantly spins like it's updating.

One just hangs when I try to save pool settings.

One refuses to start the miner.

One will mine for about 30 minutes then disconnects and freezes up.

What is going on here? Did something break?

P.S. I updated one of them to the latest version 0.8.1 and it's exactly the same, nothing works.

EDIT - Updating them all to 0.8.1 now, going to try and reset everything, if they don't work it's back to a clean rasp image and running the miners natively.

As great as Minera was, over the past few months it seems to be getting more and more sluggish, seems to be way overloaded with unnecessary features that really slow everything down.

EDIT II

Yep, getting the same error as mentioned above, just couldn't see it as the CSS was hiding it..


A PHP Error was encountered

Severity: Notice

Message: json_decode(): integer overflow detected

Filename: models/util_model.php

Line Number: 1131

So is this dusted now then?

running with gridseed as well - nothing works anymore since 0.8.1
cant save pool details
miner wont start
actually "nothing" works - it just looks nice as usual.

but no more mining possible

[michelem]

READ IF YOU HAD PROBLEMS

Hello guys,
I'm really sorry for all the troubles but that seems to be something strictly connected to specific environment I can't reproduce.
So I need your help.

Having 0.8.1 or 0.8.0 please update the code (I made some changes just now):

Code:

cd /var/www/minera
sudo git fetch --all && sudo git reset --hard origin/master

Then, delete the profitability data (the 1 minute cron job should get it again):

Code:

redis-cli del coins_profitability

Now go to your Minera via browser and make sure to reload it forcing to reload the cache (hold SHIFT key and click reload button).

Then I need your really precious feedbacks. If something continues to fail please open the developer tools, click the "console" tab and post a screenshot (also pm is you prefer).

Thanks

PS
Please report also the Raspberry version you have.