[ANN][X11] X11/Darkcoin Gpu Miner - updated to use leaked binaries - even faster

[ekoice]

after the "make" comand, you should do : "make install"
worked for me.

and, I dont know what kind of memory they have, never bothered to check.

[basilisk]

I have a problem with my 2xgigabyte 280x. When I place it with an intensity of 13 works fine (I use the sgminer of nicehash) , but with this mod, having an intensity of 15 for default appear sick at 3 minutes. I use Windows 8.1. I15 g2 w128 thread 8192.

[sikman]

I have a problem with my 2xgigabyte 280x. When I place it with an intensity of 13 works fine (I use the sgminer of nicehash) , but with this mod, having an intensity of 15 for default appear sick at 3 minutes. I use Windows 8.1. I15 g2 w128 thread 8192.

I switched form I-13 to 15 and no issues for me

My config:

sgminer -k darkcoin -o stratum+tcp://XXXXXX:3333 -u blowme -p x --gpu-fan 75 --temp-overheat 88 --temp-cutoff 92 --intensity 15 --worksize 256 -g 2 --lookup-gap 2 --thread-concurrency 8193 --gpu-engine 1022 --gpu-memclock 1500 --gpu-powertune 20

[cryptouser]

Can anyone please upload the 2% version and post a link ?! This one keeps crashing in just a couple of minutes no matter what settings i try...

[basilisk]

I have a problem with my 2xgigabyte 280x. When I place it with an intensity of 13 works fine (I use the sgminer of nicehash) , but with this mod, having an intensity of 15 for default appear sick at 3 minutes. I use Windows 8.1. I15 g2 w128 thread 8192.

I switched form I-13 to 15 and no issues for me

My config:

sgminer -k darkcoin -o stratum+tcp://XXXXXX:3333 -u blowme -p x --gpu-fan 75 --temp-overheat 88 --temp-cutoff 92 --intensity 15 --worksize 256 -g 2 --lookup-gap 2 --thread-concurrency 8193 --gpu-engine 1022 --gpu-memclock 1500 --gpu-powertune 20

I'm using you configuration, gpu 0 sick. Do you mod the rom?

[oktay50000]

donate version uses load balance
i want to use fail over...

[sikman]

I have a problem with my 2xgigabyte 280x. When I place it with an intensity of 13 works fine (I use the sgminer of nicehash) , but with this mod, having an intensity of 15 for default appear sick at 3 minutes. I use Windows 8.1. I15 g2 w128 thread 8192.

I switched form I-13 to 15 and no issues for me

My config:

sgminer -k darkcoin -o stratum+tcp://XXXXXX:3333 -u blowme -p x --gpu-fan 75 --temp-overheat 88 --temp-cutoff 92 --intensity 15 --worksize 256 -g 2 --lookup-gap 2 --thread-concurrency 8193 --gpu-engine 1022 --gpu-memclock 1500 --gpu-powertune 20

I'm using you configuration, gpu 0 sick. Do you mod the rom?

Only change was voltages, 1.1 using VBE to do it: http://www.techpowerup.com/forums/threads/vbe7-vbios-editor-for-radeon-hd-7000-series-cards.189089/

[sikman]

Can anyone please upload the 2% version and post a link ?! This one keeps crashing in just a couple of minutes no matter what settings i try...

The version your using is the 2%, what it does is use load balance and point it to one of his POOL's ( Pool 0 ) and uses 2% of your hashing power towards it.

click on on "P" for Pool management and you will see his and your pool , Pool 0 is the 2% donation and Pool 1 is mine/your's that is hashing away at 98% of it max capacity..

eg:

[basilisk]

Can anyone please upload the 2% version and post a link ?! This one keeps crashing in just a couple of minutes no matter what settings i try...

The version your using is the 2%, what it does is use load balance and point it to one of his POOL's ( Pool 0 ) and uses 2% of your hashing power towards it.

click on on "P" for Pool management and you will see his and your pool , Pool 0 is the 2% donation and Pool 1 is mine/your's that is hashing away at 98% of it max capacity..

eg:

I'm using trixx with you configuration, all fine in 40 min. 290 khs. Thanks friend.

[Remember remember the 5th of November]

If you try the version from the other thread, same speed NO 2% hidden mining.

[BitcoinGeekBoy]

If you try the version from the other thread, same speed NO 2% hidden mining.

Or just press P C 0 and enter to disable the donation pool.

[Remember remember the 5th of November]

If you try the version from the other thread, same speed NO 2% hidden mining.

Or just press P C 0 and enter to disable the donation pool.

Or simply try the other version which is open source and never hassle oneself with Pool Management settings.

[aznboy84]

Doesn't work on ASUS 280X .... around 5% increase hashrate

[kaltar]

Doesn't work on ASUS 280X .... around 5% increase hashrate

Doesn't work hmm!!!!!!

this is running on 6 asus 280x with lasybear and Remember remember the 5th of November, latest release




I'd say it does work, very nicely actually

[adaseb]

can somebody post the link to the other thread?

the one dedicated to lasybears miner for x11 ?

[lasybear]

can somebody post the link to the other thread?

the one dedicated to lasybears miner for x11 ?

https://asktom.cf/index.php?topic=623409

[Sobek007]

I m running bamt 1.6

would apritiate if someone can guide me how to add this miner to bamt.conf ,
at this moment i have to manually stop mining over bamt and manually start moded sgminer...

solved this problem?

[rentahash]

I m running bamt 1.6

would apritiate if someone can guide me how to add this miner to bamt.conf ,
at this moment i have to manually stop mining over bamt and manually start moded sgminer...

solved this problem?

nop
I m still doing manually ...

BTW I solved temp and fan speed control by these commands

export DISPLAY=:0
export GPU_MAX_ALLOC_PERCENT=100
export GPU_USE_SYNC_OBJECTS=1
./sgminer -c dark.conf

[installer]

how disable pool 0? who can do it?

[Eastwind]

how disable pool 0? who can do it?

In the miner window, press P, then C then 0 to change it to failover-only mode.

Or you can use CGWatcher >1.37 version, and use the pool guard feature in the Monitor Tab, Pool Guard Tab.