ECCoin (ECC) Takeover by Trusted-Cryptos Team [Griffith]

[Griffith]

Tried to move some coins to Swisscex and got stuck -

http://129.21.141.139:3000/tx/5203675dcced15d91cb4eef2dbf01656dab5a3222ac42444d3e17537d8df753d

Any1 know why?

it looks like that is just an orphaned block and they will move over in a later block

[q-biq]

Tried to move some coins to Swisscex and got stuck -

http://129.21.141.139:3000/tx/5203675dcced15d91cb4eef2dbf01656dab5a3222ac42444d3e17537d8df753d

Any1 know why?

it looks like that is just an orphaned block and they will move over in a later block

Phjuu, sounds good

[Bansheroom]

I cant get 1.9 to sync. Prev. Version worked, but after update even with deleting the whole ecc dir in appdata it does not even start to sync.
Config file or not makes no difference.

[Griffith]

u dont need to delete that with every update, there was just a few updates when i was changing the interest % and block stake times that u needed to delete that, i actually don't recommend that you delete that folder anymore. if u need to get it started u can add connect=129.21.141.139 to your conf file. this will get you a connect to one of the nodes. actually u can change the addnode= to connect= for the nodes in the conf file but i recommend that after it gets synced you change these back to addnode= so that you dont only connect to node and get p2p connections as well. sometimes a peer file populated by the people in the network (which is what u get from the nodes) is needed to start syncing. so try that, try changing all of the addnode= in the conf file to connect= and see if that works.

[q-biq]

Tried to move some coins to Swisscex and got stuck -

http://129.21.141.139:3000/tx/5203675dcced15d91cb4eef2dbf01656dab5a3222ac42444d3e17537d8df753d

Any1 know why?

it looks like that is just an orphaned block and they will move over in a later block

hm stil stuck?

[Krista]

Hello.
Where it is possible to look at transaction ID?
A week ago I sent 5000000 ECC to AllCoin still didn't come.
Advise what to do?

[BarTeam]

Go vote for ECC over BTer (listed by me).

https://bter.com/voting#ECC

[BarTeam]

Hello.
Where it is possible to look at transaction ID?
A week ago I sent 5000000 ECC to AllCoin still didn't come.
Advise what to do?

Here: http://129.21.141.139:3000

[taaku]

whats up with multipool

[Bansheroom]

u dont need to delete that with every update, there was just a few updates when i was changing the interest % and block stake times that u needed to delete that, i actually don't recommend that you delete that folder anymore. if u need to get it started u can add connect=129.21.141.139 to your conf file. this will get you a connect to one of the nodes. actually u can change the addnode= to connect= for the nodes in the conf file but i recommend that after it gets synced you change these back to addnode= so that you dont only connect to node and get p2p connections as well. sometimes a peer file populated by the people in the network (which is what u get from the nodes) is needed to start syncing. so try that, try changing all of the addnode= in the conf file to connect= and see if that works.

Im doing a resync with 1.8.2.1 atm, seems to work and i will let it finish and do a backup before i start updating again.
I deleted the dir and tried to resync just because after the update from 1.8.2.1 to 1.9 sync became more and more unreliable and eventually stopped completly.

[Griffith]

whats up with multipool

we are testing it atm. its up and running pretty good so far

u dont need to delete that with every update, there was just a few updates when i was changing the interest % and block stake times that u needed to delete that, i actually don't recommend that you delete that folder anymore. if u need to get it started u can add connect=129.21.141.139 to your conf file. this will get you a connect to one of the nodes. actually u can change the addnode= to connect= for the nodes in the conf file but i recommend that after it gets synced you change these back to addnode= so that you dont only connect to node and get p2p connections as well. sometimes a peer file populated by the people in the network (which is what u get from the nodes) is needed to start syncing. so try that, try changing all of the addnode= in the conf file to connect= and see if that works.

Im doing a resync with 1.8.2.1 atm, seems to work and i will let it finish and do a backup before i start updating again.
I deleted the dir and tried to resync just because after the update from 1.8.2.1 to 1.9 sync became more and more unreliable and eventually stopped completly.

ill look into that

EDIT: i have found that it does take a while to find connections, but if you leave it alone it will find one after a few minutes. i am currently working in net.cpp adding a few functions and method calls to get this problem to fix and make it find nodes faster.

[just a thought] i might also change the way the chain updates so you need a minimum of 2 or 3 peers in order to start to sync (although this might probably be a negative over a positive) or mint new blocks [just a thought]

[BarTeam]

...
[just a thought] i might also change the way the chain updates so you need a minimum of 2 or 3 peers in order to start to sync (although this might probably be a negative over a positive) or mint new blocks [just a thought]

It's actually better in terms of correct functionality of a block chain. It prevents "initial fake POS" (sometimes not confirmed) and "forking".

[BarTeam]

ECC is jumping fast over BTER! Very nice!

https://bter.com/voting#ECC (place 37)

I hope to start trading them there! Vote, vote, vote!

[groggin]

hi guys,
 some wallet/chain? trbl
  Resolved
i'm using the v1.8.4.0 wallet and win7

i want to sell a few ECC, wallet hadn't run in 2 weeks, it fired up OK but

crashed atleast 5 x with a c++ runtime error, i saved 1 error msg:

  

Code:

  Fault Module Timestamp:	0860d3b8
  Exception Code:	40000015
  Exception Offset:	00b216ad
  OS Version:	6.1.7601.2.1.0.256.1
  Locale ID:	1033
  Additional Information 1:	dc3a
  Additional Information 2:	dc3a991c8a6555863699563d7445d9cf
  Additional Information 3:	a06d
  Additional Information 4:	a06d62a0bdfb92ba3323c6e11c3ecfe2

finally, after about a day of crashing and restarting, deleting everything in the roaming folder,  restarting and restarting, it got over all the bumps and was showing synched, so i sent a few thou to swisscex

usually i will wait for a few confirms to show before i close the wallet, forgot to this time, closed it down as soon as it showed up in 'pending'

that was just abt 12 hrs ago, the deposit is still pending w/0 confirms, re-opened the wallet some hrs ago, and seems it will only synch to within 1/2 hr. before i sent (so far). i restart the wallet every hour or so, is there anything else i can do?

thanks

[edit] 1 hr. after posting, everything is OK, leaving post in place incase any info here is helpful to the spirit of bugfixing

[edit] seems as soon as my wallet was synched, the swisscex wallet synched too. why?  does my wallet need to be involved in confirming all of my transactions? i thought anyone mining/staking would provide confirms once sent/recieved. i guess it's always important to wait for the confirms before closing.  

[edit] i was thinking, maybe no one is mining or staking atm;  :wrong:    networkhashps" : 319879217

[groggin]

[edit] seems as soon as my wallet was synched, the swisscex wallet synched too. why?  does my wallet need to be involved in confirming all of my transactions? i thought anyone mining/staking would provide confirms once sent/recieved. i guess it's always important to wait for the confirms before closing.   

As far as I know, you should keep your wallet online a while once you send a transaction. If you don't have a lot of connections or your wallet is busy with other things, it might not have propagated through the network yet. This is solved by keeping it online for a while till you see a confirmation.

  right, i guess evidently, but the transmission had been received, awaiting conf. anyway, thx

[Griffith]

i think swisscex froze there market and wallet. since trading on that site is disabled atm

[groggin]

i think swisscex froze there market and wallet. since trading on that site is disabled atm

 hi griffith
err - i was able to post some asks already

[Swisscex]

The ECC/BTC has been closed, since the exchange rate is below 1 Satoshi.

You can still trade ECCoin on our ECC/LTC market: https://www.swisscex.com/market/ECC_LTC

Best regards,

Kevin
SWISSCEX

[immeraba]

The ECC/BTC has been closed, since the exchange rate is below 1 Satoshi.

You can still trade ECCoin on our ECC/LTC market: https://www.swisscex.com/market/ECC_LTC

Best regards,

Kevin
SWISSCEX

Here we go again... when will we see 4 sat again???
Never?

[andromeda66]

@griffith

look at this....that would be a game changer

Project XUC

https://asktom.cf/index.php?topic=791338