[ANN] [XMG] MAGI | CPU mining | mPoW | mPoS | [MagiPay]

[starmman]

Have you guys thought about updating main page with a new roadmap. Not criticizing but its nice if the first page has a clean decisive roadmap to breakdown project.

If not just updating with a roadmap, some of the links in the main page seem to be dead or not working anymore, at least on my end. Some cleaning up would make it a bit easier to get started with the coin, or at least less confusing for some of the new guys like myself.  

Exactly; I'll clean these things up and fill in descriptions / clarifications like what's magi's PoW, and how PoS worked out. A to-do-list is a must also. Busy in getting the overdue release ready, will divert my focus on the OP once the new wallets are released.

Great stuff - I think a roadmap will make a massive impact on people adopting the coin - its one of that main things new investors will look at when completing a fundamental analysis when deciding on which coin to invest.

Who can make a good roadmap? Joe?

I can help here if needed - but will need to know the main points - is there anything like a slack group for Magi, so these topics can be discussed in real-time? I can help set one up if you guys agree we need one.

[preble]

I have been in other forums and the positivity is just overwhelming here. No doubt the most enjoyable forum to read. It's great how ideas are being discussed to progress magi even further ahead. It's no mystery magi is one of only 79 altcoins on poloniex.

[liberatorium]

does anyone have a recent bootstrap? my wallet is stuck since 10 days ago, and only 1 connenction.


also, which is the last stable wallet version? i'm using 1.3.0.0 - but it has a warning at the bottom:

'This is a pre-release test build - use at your own risk - do not use for mining or merchant applications'

[starmman]

does anyone have a recent bootstrap? my wallet is stuck since 10 days ago, and only 1 connenction.


also, which is the last stable wallet version? i'm using 1.3.0.0 - but it has a warning at the bottom:

'This is a pre-release test build - use at your own risk - do not use for mining or merchant applications'

I'm on that version and all is working fine for me,

did you add any nodes to your magi.conf file? Could be worth adding more nodes and restarting the wallet

there are some noes listed in the op of this thread, and if you need more check the following link
https://chainz.cryptoid.info/xmg/#!network

[liberatorium]

thanks i've been running it for several months though, with enough connections.
but now it's stuck/forked - so will have to re-sync the chain. a bootstrap would be very helpful

[brigabriela470]

What is exactly the end goal of magi

That's one for Joe or 111magic to answer officially =)

I see Magi as a coin that is scaled for fairness, the algorithm is unique as it stops rewarding when big miners get on board - so makes it better for the smaller miner and deters the larger miner. This could make the coin valuable - and helps with even distribution, since its difficult to mine a lot of - it could also make the larger miners move away from the coin as they can't make immediate profit - but as more people get involved I think the rarity of the coin will increase and this will hopefully translate to greater value.

There is certainly no other project like Magi around. It has quite a few USP's.

Yes right Starmman. Sorry for my late response.
But i see you gave a good answer. Thanks for that.
Another thing is that Magi gives all people in the world a good & easy way to mine and learn about this unique  digital currency. People don't need a very fast or expensive computer to mine XMG. Think about people living in other places. In some countries people live 1 month with $100,-  In other countries you need $100,- for a week or less. So the value of XMG and the option to mine it with a simple computer or idle gives more people the option to do. Magi also has some awesome campaigns like the Proof of Interest campaign.
Last interest-rate was 6.7% What bank would give you that in only  3 months.

Magi achieved most goals because of the help or support
of the awesome Magi community or crypto-friends.
Magi team does not hold big wallets and is working on the future of the currency in the spare time they have next to busy jobs and their family's.
Magi team is doing this because we believe in the great future of digital currencies and special Magi.

I can tell so many good things about our developer or others but than this post will because more a book.
I just would like to say that whatever happend with Magi  (XMG) value up or down, new exchanges, removed or hacked exchanges, more services, etc.... Magi team will be here and stays always friendly and supporting.

During the last years Magi (team) had good times and bad times.
We lost teammembers, (RIP my friend), accidents, less time to work on the currency, added on Cryptsy etc..

But for sure we believe Magi is the next generation currency for all people living everywhere! And we will continue working on that.

Sorry for the long post!


http://www.blockchaindynamics.net/voting.html
Vote for Magi here pls.

do not feel sorry for the long post but stress only upon the authentication.

[PetATL]

Can you please send some manual how to setup wallet for POS 2 because I try few version of wallets but it stake very low amount, when I compare it with different wallet with same amount.

Thanks

[starmman]

thanks i've been running it for several months though, with enough connections.
but now it's stuck/forked - so will have to re-sync the chain. a bootstrap would be very helpful

Sorry, I understand you now -

Will this link to a blockchain download help you?

http://coinmagi.org/bin/block-chain/

[starmman]

U guys have slack.

I've searched and found the following link setup by lionheart78 

https://coinmagi.slack.com/

Not sure how to join - is it invite only?

[liberatorium]

thanks i've been running it for several months though, with enough connections.
but now it's stuck/forked - so will have to re-sync the chain. a bootstrap would be very helpful

Sorry, I understand you now -

Will this link to a blockchain download help you?

http://coinmagi.org/bin/block-chain/

that did the trick, it's synced and staking thank you very much!

[starmman]

thanks i've been running it for several months though, with enough connections.
but now it's stuck/forked - so will have to re-sync the chain. a bootstrap would be very helpful

Sorry, I understand you now -

Will this link to a blockchain download help you?

http://coinmagi.org/bin/block-chain/

that did the trick, it's synced and staking thank you very much!

Great to hear - I wish you happy staking!

I'm using the following settings in my magi.conf which stops me from having to use coin control to keep my staking weight up - might be useful to you - some other people on here tweak them differently

Code:

# posii=0 to disable PoS staking; default = 1
posii=1
# Transaction under stake with a value greater than the threshold is being splitted
stakesplitthreshold=150
# Transactions with values less than the threshold will combine into one
stakecombinethreshold=74

[Abiky]

While this sounds secondary, I'd post preliminary switch of logo to a new version (blue the primary) for clarity and simplicity: 





I propose in all of the situations where logos are used a switch should be done. Pls help to spread the words.

Here is a link to png files: http://coinmagi.org/files/logo/v2/, where you can also find the .svg. You're very welcome to improve / design logos.

@goldlabel, initial logo pngs will be remained here: http://coinmagi.org/files/logo/v1/

The logo looks simple, yet gives a cleaner image of Coin Magi itself. I like it due to the simplicity of the same, while at the same time delivering a colorful appearance, that it is sort of eye catching.

If I were to vote for a new logo for Coin Magi, that would be the blue one. I kinda of miss the II symbol which appeared on the original logo, which helped reflect Coin Magi's unique PoS II, but even still, it looks nice.

Nevertheless, I'm looking forward for the new release of the Magi wallet, as well as more exciting stuff like the logo, to help increase Coin Magi's popularity and value. 

[MilkandPie4U]

thanks i've been running it for several months though, with enough connections.
but now it's stuck/forked - so will have to re-sync the chain. a bootstrap would be very helpful

Sorry, I understand you now -

Will this link to a blockchain download help you?

http://coinmagi.org/bin/block-chain/

that did the trick, it's synced and staking thank you very much!

Great to hear - I wish you happy staking!

I'm using the following settings in my magi.conf which stops me from having to use coin control to keep my staking weight up - might be useful to you - some other people on here tweak them differently

Code:

# posii=0 to disable PoS staking; default = 1
posii=1
# Transaction under stake with a value greater than the threshold is being splitted
stakesplitthreshold=150
# Transactions with values less than the threshold will combine into one
stakecombinethreshold=74

I use posii=0 to ensure the blockchain is fully synced before staking, you can fork if staking when syncing. Just allow the chain to sync after starting the wallet , get the green checkmark in the qt wallet, then enable staking.

[jediwashuu]

I have been with magi for over a year, I can probably wait longer!
I am just looking to run the wallet so I can have a node going on my Pine64.  Its small, and low power, so it could be really good for that.
I tried making it myself with the git repository files, but I ended up getting an unknown switch error (i think it was -msse2, or something like that)

Has anyone tried running this on a Pine64?  I have one with ROKOS v7 on it, and have successfully got it to attach to a NAS for a bitcoin node, and now i would like to do the same for a magicoin node.  When i download the wallet from the website, it does not actually seem to open for me.  Suggestions to make it open?

I guess there isn't well established process of running magi on Pine64. I recommend either compiling the daemon from source, or if you could stick to magi that far, I'll get this issue sorted out in the near future.

[starmman]

I have been with magi for over a year, I can probably wait longer!
I am just looking to run the wallet so I can have a node going on my Pine64.  Its small, and low power, so it could be really good for that.
I tried making it myself with the git repository files, but I ended up getting an unknown switch error (i think it was -msse2, or something like that)

I'm planning at some point to make a pi build - not sure if that will help with a Pine64 or not.

Magi price is looking very nice today

[BitcoinNational]

re: ◥◣ TALK◥◣ suggested POS coins

XMG ... stop bye, say "hello planet!"

you all need a rep

https://asktom.cf/index.php?topic=1718048

[My9bot]

I have been with magi for over a year, I can probably wait longer!
I am just looking to run the wallet so I can have a node going on my Pine64.  Its small, and low power, so it could be really good for that.
I tried making it myself with the git repository files, but I ended up getting an unknown switch error (i think it was -msse2, or something like that)

I'm planning at some point to make a pi build - not sure if that will help with a Pine64 or not.

Magi price is looking very nice today

Build your MagiCoin XMG Wallet
tested at pi2

Code:

sudo apt-get update
sudo apt-get upgrade

sudo apt-get install -y gcc-4.9 g++-4.9
sudo apt-get install -y libgmp-dev libcurl4-openssl-dev libjansson-dev git

sudo apt-get install -y libdb5.3-dev libdb5.3++-dev
sudo apt-get install -y libboost-all-dev
sudo apt-get install -y libqrencode-dev
sudo apt-get install -y libminiupnpc-dev libminiupnpc

for v1.3.0-RC :

Code:

BRANCH="1.3.0rc"
mkdir $BRANCH
cd $BRANCH
git init
git remote add -t $BRANCH -f origin https://github.com/magi-project/magi.git
git checkout $BRANCH

cd src/

Now edit your makefile.unix
goto line 108 :

Code:

ifeq ($(xCPUARCH),armv7l)

and replace it with :

Code:

ifeq ($(xCPUARCH),armv7l)
xCXXFLAGS+=-Ofast -mcpu=cortex-a7 -mfpu=neon-vfpv4 -mfloat-abi=hard

now build magid with :

Code:

make -f makefile.unix xCPUARCH=armv7l

[eule]

FYI around 20k XMG were lost when my hard drive crashed. Make backups!

edit: Or was it 2k? Not sure anymore, which is the worst... 

[111magic]

FYI around 20k XMG were lost when my hard drive crashed. Make backups!

edit: Or was it 2k? Not sure anymore, which is the worst... 

Wow. I'am very sorry to hear that. Indeed its very important to make backups.

[eule]

Shit happens, lesson learnt.