Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux)

[golden0707]

Can someone pinch me, I must be still asleep dreaming...

Have been couple times ago. IMO not for long.....

[BenCodie]

getting job cannot received error


Any idea?

[CoRpO]

getting job cannot received error


Any idea?

You have very bad ping times, have you tried the other nanopool urls ? (zec-us-west1.nanopool.org, zec-us-east1.nanopool.org, zec-eu2.nanopool.org, zec-eu1.nanopool.org) or port 16666 instead of 6666 ?

[BenCodie]

getting job cannot received error


Any idea?

You have very bad ping times, have you tried the other nanopool urls ? (zec-us-west1.nanopool.org, zec-us-east1.nanopool.org, zec-eu2.nanopool.org, zec-eu1.nanopool.org) or port 16666 instead of 6666 ?

nope i didn't tried either of above but yes i changed the port to 16666
let me give it a try again

Edit : changed pool url to eu1 [problem solved]

[glerand]

Can someone pinch me, I must be still asleep dreaming...

Have been couple times ago. IMO not for long.....

You are right. I am not bothered to switch to ZEC from ETH. I did that a few times before, had to switch back soon.

[BenCodie]

Yes



Two minutes ago it was on 70.899 lol

[orbital_station1]

Does anyone know average H/s & power draw for stock R9 380 4Gb? Miner ver 7.0 ofc.
I found some used ones on sale for cheap, so considering to buy.
Thanks

[Zzsdr]

I have a rig with 6 x sapphire nitro+ oc rx 480 8gb cards and using a modded bios from eth I am getting:
- 1000h/s for about 910w at the wall
Can we get more h/s from this gpu and less power draw?

I have the exact same cards, 7 of them in 1 rig.
1050H/s 780 Watts at the wall.

You need to underclock and undervolt.

D8V1D what is your motherboard?

[TTo314]

Thanks for your work, I am very satisfied with the performance.

Is possible add change of pool without restart the miner? In restart there are times that one o two GPUs won't restart correctly.

Thank you very much

[mohnori]

Does anyone know average H/s & power draw for stock R9 380 4Gb? Miner ver 7.0 ofc.
I found some used ones on sale for cheap, so considering to buy.
Thanks

Its GPU#2 :

Code:

GPU #0: Hawaii, 4096 MB available, 40 compute units 
GPU #1: Hawaii, 8192 MB available, 40 compute units 
GPU #2: Tonga, 4096 MB available, 28 compute units 
ZEC - Total Speed: 507.560 H/s, Total Shares: 2150, Rejected: 65, Time: 01:13 
ZEC: GPU0 188.030 H/s, GPU1 208.858 H/s, GPU2 110.665 H/s 
Pool switches: ZEC - 0 
Current ZEC pool share target: 0x00418937 (diff: 1000H) 
GPU0 t=79C fan=56%, GPU1 t=70C fan=46%, GPU2 t=65C fan=50% 

[Lerrcey]

Has anyone else experienced an issue with Claymore ZCash Miner v7.0 regarding only one of the GPU's working at half it's strength?

http://imgur.com/e9ufHz7

These three rigs are using all 480 8GB Sapphire Nitro+ cards.

All of the Sol/s is great except that one...


I have hard reset, checked all the cables, removed the overclock, and switched the bios yet nothing will budge it.

No matter what I do; I can't bring it up to speed. The lazy swine.


Does anyone have any suggests?

[dudutti]

Has anyone else experienced an issue with Claymore ZCash Miner v7.0 regarding only one of the GPU's working at half it's strength?



These three rigs are using all 480 8GB Sapphire Nitro+ cards.

All of the Sol/s is great except that one...


I have hard reset, checked all the cables, removed the overclock, and switched the bios yet nothing will budge it.

No matter what I do; I can't bring it up to speed. The lazy swine.


Does anyone have any suggests?

maybe try to put a monitor on this card

[ghostfaceuk]

Has anyone else experienced an issue with Claymore ZCash Miner v7.0 regarding only one of the GPU's working at half it's strength?



These three rigs are using all 480 8GB Sapphire Nitro+ cards.

All of the Sol/s is great except that one...


I have hard reset, checked all the cables, removed the overclock, and switched the bios yet nothing will budge it.

No matter what I do; I can't bring it up to speed. The lazy swine.


Does anyone have any suggests?

maybe try to put a monitor on this card

Does it have to be a monitor or can it just be a adaptor?  I'm sure I read earlier in the thread people have been using cheap adaptors from ebay/amazon to help fix this.

[dudutti]

Has anyone else experienced an issue with Claymore ZCash Miner v7.0 regarding only one of the GPU's working at half it's strength?



These three rigs are using all 480 8GB Sapphire Nitro+ cards.

All of the Sol/s is great except that one...


I have hard reset, checked all the cables, removed the overclock, and switched the bios yet nothing will budge it.

No matter what I do; I can't bring it up to speed. The lazy swine.


Does anyone have any suggests?

maybe try to put a monitor on this card

Does it have to be a monitor or can it just be a adaptor?  Sure I read earlier in the thread people have been using cheap adaptors from ebay/amazon to help fix this.

For me an adaptator never work only, custom adaptator maybe or dummy plug like this
http://www.ebay.fr/itm/5-PACK-DVI-Graphics-Card-Display-GPU-Detection-Monitor-Dummy-Plug-Adapter-VE-D11-/271595376795?hash=item3f3c58909b:g:4wEAAOSwQYZWzkGt

[iMish]

Does anyone know average H/s & power draw for stock R9 380 4Gb? Miner ver 7.0 ofc.
I found some used ones on sale for cheap, so considering to buy.
Thanks

21 MH/s on ethash and 110 H/s on equihash, so ethash is much more profitable for this card

with this modded bios it goes up to 24 MH/s:

https://asktom.cf/index.php?topic=1620733.0

[TTo314]

Thanks for your work, I am very satisfied with the performance.

Is possible add change of pool without restart the miner? In restart there are times that one o two GPUs won't restart correctly.

Thank you very much

Excuse me, The "r" option combined with epools.txt works perfectly. Great software.

[draxy]

I have a rig with 6 x sapphire nitro+ oc rx 480 8gb cards and using a modded bios from eth I am getting:
- 1000h/s for about 910w at the wall
Can we get more h/s from this gpu and less power draw?

I have the exact same cards, 7 of them in 1 rig.
1050H/s 780 Watts at the wall.

You need to underclock and undervolt.

what gpu/mem clock and gpu voltage are you using?

[giagge]

I have 165 hs with amd 480 4gb nitro+ stock bios .

[ffthomas]

Does anyone know average H/s & power draw for stock R9 380 4Gb? Miner ver 7.0 ofc.
I found some used ones on sale for cheap, so considering to buy.
Thanks

If you pay for electricity IMO you should not buy them. Too much power consumption for ~120H/s.

[Le_Bleu]

Can someone pinch me, I must be still asleep dreaming...

http://i67.tinypic.com/zl4y8n.png

Could you share the URL?