|
CMMPro
|
 |
November 24, 2013, 09:12:05 PM |
|
Hey has there been any info about special deals for gen 1 /batch 1 buyers in the future?
I'm sure they promised us special consideration for buying the gen 1 stuff and getting this party started....any deals on future hardware offerings?
My Saturn has paid for itself 1.5x over and I want to get something more powerful.
Let's hear about some gen 2 hardware specials...maybe something in the 2TH range?
Or send us an email with a coupon....I'd probably jump on that even if it was a pre-order.
|
|
|
|
|
|
Henchman24
|
|
November 24, 2013, 09:45:36 PM |
|
I use that PSU on a Jupiter. I put each module on a separate rail. It's worked flawlessly so far. I'm confident it will work fine with Nov. units as well. |
|
|
|
|
soy
Legendary
 Offline
Activity: 1428
Merit: 1013
|
|
November 24, 2013, 09:56:23 PM |
|
I had mistakenly thought the new module was running cooler than the original in my Merc. Realizing the new module at 55°C might run better if cooled like the original running at 34°C and having two Antec 3 speed 120mm fans with 4 grills, I put one either side of the new module, just plugging into the 4 pin molex but that glitched and putty disconnected so I rebooted. Here I ran into trouble. The BBB couldn't get a connect. No bright white light, no red/green. It may have been the 3 speed switch on the fans. If those are SCRs perhaps the noise disturbed the BBB. I ended up running the two Antec fans from a nearby supply not associated with the Merc. Now it's back up and running all cores 37.5° and 34.5°C 285GH/s.
|
|
|
|
|
RChevalier
Member
Offline
Activity: 94
Merit: 10
|
|
November 24, 2013, 09:59:03 PM |
|
Well I'll put one more vote in for the .981 being better than .99
It's been running for 3days now with exactly 4Gh/s lower than .981 so i guess it's time to switch back.
one question about switching firmware:
Do you guys wait until a block is found before stopping your machines to upgrade?
|
|
|
|
|
Phoenix1969
Legendary
Offline
Activity: 938
Merit: 1000
LIR DEV
|
|
November 24, 2013, 10:02:40 PM
Last edit: November 24, 2013, 10:28:17 PM by Phoenix1969 |
|
Well I'll put one more vote in for the .981 being better than .99
It's been running for 3days now with exactly 4Gh/s lower than .981 so i guess it's time to switch back.
one question about switching firmware:
Do you guys wait until a block is found before stopping your machines to upgrade?
Meh, I just "go for it" with multiple machines, the connection to the pool, and hashing never stops tho... so the pool doesn't ever assume you are "poolhopping"  |
|
|
|
Epoch
Legendary
Offline
Activity: 922
Merit: 1003
|
|
November 24, 2013, 10:03:43 PM |
|
Do you guys wait until a block is found before stopping your machines to upgrade?
If you are on a hop-proof pool it makes no difference when you choose to have down-time. On a hoppable pool it is best to wait until you are in an unlucky round. If you are solo mining it makes no difference. |
|
|
|
|
|
|
Phoenix1969
Legendary
Offline
Activity: 938
Merit: 1000
LIR DEV
|
|
November 24, 2013, 10:28:26 PM |
|
Okay, I got a weird one for ya... couldn't get my finicky vrm to wake up this morning....tried my temp tricks...nada....but physically grabbed the cooling tower with both hands, rocked it clockwise & counter-clockwise...(without actually moving anything), which did the trick! .... another possible whammy MacGuyver fix for ya. ... ug.
|
|
|
|
|
CYPER
|
|
November 24, 2013, 10:33:50 PM |
|
OK everyone: from now on if you have a problem with your VRM please grab your heatsinks with both hands and start twisting, then do a voodoo dance while naked. That should do the trick  |
|
|
|
|
|
Bitcoinorama
|
|
November 24, 2013, 10:34:15 PM |
|
Tuning Suite any time soon? Now with the team busy on the next production run any chance of us seeing it in the next few weeks? 'Orama please sir? What is the potential of the suite? Got the gear in the garage now that its cold out, would love to start overclocking it while the weather is favorable.  Joe it's pretty much ready, it's being tested to male sure range wise it's doesn't compromise your hardware and create RMA hell. As I said before it's a matter of days, not weeks! |
Make my day! Say thanks if you found me helpful BTC Address ---> 1487ThaKjezGA6SiE8fvGcxbgJJu6XWtZp |
|
|
|
Bitcoinorama
|
|
November 24, 2013, 10:35:18 PM |
|
Heads-up for tomo BTW - incoming...
|
Make my day! Say thanks if you found me helpful BTC Address ---> 1487ThaKjezGA6SiE8fvGcxbgJJu6XWtZp |
|
|
Phoenix1969
Legendary
Offline
Activity: 938
Merit: 1000
LIR DEV
|
|
November 24, 2013, 10:41:38 PM |
|
OK everyone: from now on if you have a problem with your VRM please grab your heatsinks with both hands and start twisting, then do a voodoo dance while naked. That should do the trick I must admit, sounds like bad advice....it was a move made in desperation...but it worked dammit!... hahahahaa **Thanks O'rama.... That's MUSIC to my ears! |
|
|
|
|
lemonte
|
|
November 24, 2013, 10:43:04 PM |
|
Heads-up for tomo BTW - incoming...
November delivery news??? |
|
|
|
Phoenix1969
Legendary
Offline
Activity: 938
Merit: 1000
LIR DEV
|
|
November 24, 2013, 10:45:12 PM |
|
Heads-up for tomo BTW - incoming...
November delivery news??? That was the news....! |
|
|
|
|
Bitcoinorama
|
|
November 24, 2013, 10:45:34 PM |
|
Heads-up for tomo BTW - incoming...
November delivery news??? Nope... |
Make my day! Say thanks if you found me helpful BTC Address ---> 1487ThaKjezGA6SiE8fvGcxbgJJu6XWtZp |
|
|
|
CYPER
|
|
November 24, 2013, 10:49:07 PM |
|
Heads-up for tomo BTW - incoming...
November delivery news??? Nope... I can't say I am surprised Don't get excited folks - November shipping is December shipping for a lot of us  |
|
|
|
|
|
lemonte
|
|
November 24, 2013, 10:49:47 PM |
|
Heads-up for tomo BTW - incoming...
November delivery news??? Nope... Now I'm intrigued.. Will be pressing refresh from 9AM. Fingers crossed it's not second generation news as right now I don't have a pot to piss in. |
|
|
|
|
Bitcoinorama
|
|
November 24, 2013, 10:50:01 PM |
|
Heads-up for tomo BTW - incoming...
November delivery news??? Nope... I can't say I am surprised Don't get excited folks - November shipping is December shipping for a lot of us Cyper, I have honestly never met anyone as pessimistic as you... |
Make my day! Say thanks if you found me helpful BTC Address ---> 1487ThaKjezGA6SiE8fvGcxbgJJu6XWtZp |
|
|
|
lemonte
|
|
November 24, 2013, 10:51:11 PM |
|
Heads-up for tomo BTW - incoming...
November delivery news??? Nope... I can't say I am surprised Don't get excited folks - November shipping is December shipping for a lot of us Cyper, I have honestly never met anyone as pessimistic as you... Avenger, surely? Have you been working this weekend O'rama? |
|
|
|
|
Bitcoinorama
|
|
November 24, 2013, 10:52:20 PM |
|
Heads-up for tomo BTW - incoming...
November delivery news??? Nope... Now I'm intrigued.. Will be pressing refresh from 9AM. Fingers crossed it's not second generation news as right now I don't have a pot to piss in. Ah...erm ok then, forget the news about... Well, in that case Marcus is heading down to the factory at 3am this morn to personally oversee the assembly line the entire week your boxes are being assembled and shipped. |
Make my day! Say thanks if you found me helpful BTC Address ---> 1487ThaKjezGA6SiE8fvGcxbgJJu6XWtZp |
|
|
|
