OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.11.1

[Degolep]

thx.

with my ATI 7950 stock(880/1250) I get max 520KH/s which results in 7 hours 1k DOGE.

[Gandalfs Mentor]

So I recently tried updating cgminer on two of my windows machines from 3.12.0 to 3.12.3 that are connected to multiple hashfast babyjets, and whenever I try running 3.12.3 cgminer just crashes on startup, yet 3.12.0 works...

I strongly advise people wait till they have new firmware as the new cgminer code is optimised around it and vice versa.

Sorry keeping up with everything is hard sometimes.

When's the new firmware being released?

Greetings masked brother from another mother,

Take and start 3.12.0 and enter the url, user, and password ~IE get it running...
Now start 3.12.3 and again enter the url, user and password data ~when it starts, shut down 3.12.0 with Q command.

This worked on my 2012 Server... it runs for a while then crashes, I'm still poking it with a stick so I can't say much more at the moment.

I realize this is a horrible hack, forgive me CK

[coolice]

Hi, this is newcomer here.

Does anybody know why I'm getting such screen output on Linux? It seems under debug mode
It was normal under Windows

https://i.imgur.com/cr1W2oD.png

https://i.imgur.com/At0wK9x.png

Thanks!

[rgr_rgr]

I guess you have forgotten to install libncurses5-dev. Or it is a version too old. Check output of ./configure.

[chek2fire]

The last version of cgminer is the most stable version i ever use. I run it for three days now without any crash. My system is some icarus,some antminer, some bifure some nanofury and a pinch of redfury

[Globalm]

Hi.  Complete n00b here!

I have searched but may not be specifying the correct terminology so apologies in advance.

I am attempting to run cgminer under Windows 7 to mine Maxcoin using my GPU (AMD 6770).

Cgminer starts for a couple of seconds and then dies.  Log output is as follows

[18:32:45] Log date is now 2014-02-11
 [18:32:45] Started cgminer 3.7.3
 [18:32:45] CL Platform 0 vendor: Intel(R) Corporation
 [18:32:45] CL Platform 0 name: Intel(R) OpenCL
 [18:32:45] CL Platform 0 version: OpenCL 1.1
 [18:32:45] Platform 0 devices: 0
 [18:32:45] CL Platform 1 vendor: Advanced Micro Devices, Inc.
 [18:32:45] CL Platform 1 name: AMD Accelerated Parallel Processing
 [18:32:45] CL Platform 1 version: OpenCL 1.2 AMD-APP (1348.5)
 [18:32:45] Platform 1 devices: 1
 [18:32:45]    0   Juniper
 [18:32:45] GPU 0 iAdapterIndex 0 strUDID PCI_VEN_1002&DEV_68BA&SUBSYS_31551682&REV_00_4&B77C4C1&0&0008A iBusNumber 1 iDeviceNumber 0 iFunctionNumber 0 iVendorID 1002 strAdapterName  AMD Radeon HD 6700 Series
 [18:32:45] GPU 0 AMD Radeon HD 6700 Series hardware monitoring enabled
 [18:32:45] GPU 0 BIOS partno.: 113-HD677AZNF81-113-AC35000-100, version: 012.020.000.055, date: 2011/04/16 01:33
 [18:32:45] Probing for an alive pool
 [18:32:45] Popping work to stage thread

Output of cgminer -ndevs is as follows

[18:48:46] Log date is now 2014-02-11
 [18:48:46] CL Platform 0 vendor: Intel(R) Corporation
 [18:48:46] CL Platform 0 name: Intel(R) OpenCL
 [18:48:46] CL Platform 0 version: OpenCL 1.1
 [18:48:46] Platform 0 devices: 0
 [18:48:46] CL Platform 1 vendor: Advanced Micro Devices, Inc.

 [18:48:46] CL Platform 1 name: AMD Accelerated Parallel Processing

 [18:48:46] CL Platform 1 version: OpenCL 1.2 AMD-APP (1348.5)

 [18:48:46] Platform 1 devices: 1
 [18:48:46]     0       Juniper
 [18:48:46] GPU 0 AMD Radeon HD 6700 Series hardware monitoring enabled

 [18:48:46] GPU 0 BIOS partno.: 113-HD677AZNF81-113-AC35000-100, version: 012.02
0.000.055, date: 2011/04/16 01:33
 [18:48:46] 1 GPU devices max detected

Can anyone shed any light on this problem or suggest further diagnostics.  All drivers are up to date.

Many thanks.

[Globalm]

MaxCoin uses SHA-3, cgminer does not.

Thanks for that.

Cgminer command line reads

cgminer.exe --keccak --no-submit-stale -o stratum+tcp://maxpool.1gh.com:17333 -u MyPasswordGoesHere -p x -I 9 -D 2>c:\temp\cgminer.log

I understood that SHA-3 and keccak were, effectively, the same.  If this is wrong then the advice in many places that cgminer 3.7.3 is suitable for Maxcoin mining must be incorrect.  It is often downloadable as a .zip called 'cgminer3.7.3_maxcoin.zip'.

Seems strange!

Any recomendations for a suitable GPU miner for Maxcoin?

Thanks again.

[kano]

MaxCoin uses SHA-3, cgminer does not.

Thanks for that.

Cgminer command line reads

cgminer.exe --keccak --no-submit-stale -o stratum+tcp://maxpool.1gh.com:17333 -u MyPasswordGoesHere -p x -I 9 -D 2>c:\temp\cgminer.log

I understood that SHA-3 and keccak were, effectively, the same.  If this is wrong then the advice in many places that cgminer 3.7.3 is suitable for Maxcoin mining must be incorrect.  It is often downloadable as a .zip called 'cgminer3.7.3_maxcoin.zip'.

Seems strange!

Any recomendations for a suitable GPU miner for Maxcoin?

Thanks again.

You are not using cgminer.
There is no --keccak in cgminer.
You are downloading a version from someone else.
Who knows what is in that binary .............

[Globalm]

[/quote]
You are not using cgminer.
There is no --keccak in cgminer.
You are downloading a version from someone else.
Who knows what is in that binary .............
[/quote]

Got it.

I found this in Github (part of README for this)

"This is a modified cgminer software for Maxcoin stratum mining."

The author is someone called 'Reorder'.

I guess I need to seek help elsewhere.

Thanks.

[Entropy-uc]

Con / Kano:

What is the situation with Cointerra?  Did they provide test hardware / arrange for driver development in cgminer? 

I'm eager to get these machines consolidated on one instance of cgminer running on decent hardware rather than a bunch of beaglebone controllers.

[-ck]

Con / Kano:

What is the situation with Cointerra?  Did they provide test hardware / arrange for driver development in cgminer?  

I'm eager to get these machines consolidated on one instance of cgminer running on decent hardware rather than a bunch of beaglebone controllers.

Cointerra developed the communication protocol entirely based on my discussions with them and the driver for cgminer I wrote completely. Once hardware is in regular customers' hands I will push the driver to the master cgminer code. They are straight forward USB devices that are connected to a beaglebone black for standalone operation but you can unplug the beaglebone and plug a regular PC into their USB. I personally do not have any hardware yet, as I have only worked on them remotely.

[Entropy-uc]

Con / Kano:

What is the situation with Cointerra?  Did they provide test hardware / arrange for driver development in cgminer?  

I'm eager to get these machines consolidated on one instance of cgminer running on decent hardware rather than a bunch of beaglebone controllers.

Cointerra developed the communication protocol entirely based on my discussions with them and the driver for cgminer I wrote completely. Once hardware is in regular customers' hands I will push the driver to the master cgminer code. They are straight forward USB devices that are connected to a beaglebone black for standalone operation but you can unplug the beaglebone and plug a regular PC into their USB. I personally do not have any hardware yet, as I have only worked on them remotely.

There are in customer hands at this point.  It looks like there is some work needed on stability at least.

Let me know if you need access to multiple systems for testing.

[jimjam1210]

trying to use an older 3.72 version with my imac in built gpu put a srypct server in mining like sha256 where is config how do i change what its doing looked in appsupport nothing please help
how do i flip to scrypt mining running 10.6.8
help please

[jimjam1210]

found config file in a hidden file in users /.cgminer/cgminer.config still wont run scrpt can any one send me an example config that will work as i ahve tried what i know and still doin mh in kh weird

[-ck]

Con / Kano:

What is the situation with Cointerra?  Did they provide test hardware / arrange for driver development in cgminer?  

I'm eager to get these machines consolidated on one instance of cgminer running on decent hardware rather than a bunch of beaglebone controllers.

Cointerra developed the communication protocol entirely based on my discussions with them and the driver for cgminer I wrote completely. Once hardware is in regular customers' hands I will push the driver to the master cgminer code. They are straight forward USB devices that are connected to a beaglebone black for standalone operation but you can unplug the beaglebone and plug a regular PC into their USB. I personally do not have any hardware yet, as I have only worked on them remotely.

There are in customer hands at this point.  It looks like there is some work needed on stability at least.

Let me know if you need access to multiple systems for testing.

Cointerra driver now merged into the cgminer master code. Numerous generic fixes from cgminer itself likely are in the cgminer master code based on cgminer 3.12.3 that are not in the standalone software released with the hardware in the beaglebone black. Without actual hardware it is distinctly possible there are bugs I have been unable to reproduce and debug so far, so if you wish to give me access to hardware to mine with it to test the software, please pm me.

[jimjam1210]

 could anyone  send me a config to mine any script coin

 Invalid config option --scrypt: Invalid value this is the error here is the config where am i going wrong
 {
"pools" : [
   {
      "url" : "stratum+tcp://euro1.coinhuntr.com:3333",
      "user" : "jimjam1210.jimjam",
      "pass" : ""
   }
]
,
"intensity" : "d",
"vectors" : "2",
"worksize" : "128",
"kernel" : "poclbm",
"lookup-gap" : "0",
"thread-concurrency" : "0",
"shaders" : "0",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "120",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"gpu-threads" : "2",
"hotplug" : "5",
"log" : "5",
"no-pool-disable" : true,
"queue" : "0",
"scan-time" : "60",
"scrypt" : "true",
"shares" : "0",
"kernel-path" : "/Users/kcupit/Desktop/cgminer/x86_64/cgminer/bin"

[kano]

could anyone  send me a config to mine any script coin
...

Please take this elsewhere.
cgminer has no GPU or alt-coin code in it.
Only old unsupported versions do.

[ShiNoDaX]

i have asic blade 10.7 GHS i want mining in site www.cex.io -what do I do ?
how config menu (ASICMiner Blade Setup)
http://www3.0zz0.com/2014/02/12/13/555823398.jpg

[RaTTuS]

i have asic blade 10.7 GHS i want mining in site www.cex.io -what do I do ?
how config menu (ASICMiner Blade Setup)
...

find a correct thread to post in - this has nothing whatever to do with cgminer

[jimjam1210]

could anyone  send me a config to mine any script coin
...

Please take this elsewhere.
cgminer has no GPU or alt-coin code in it.
Only old unsupported versions do.

dude when the post was made it said mac osx / linux / pc

it might be an older version but thread still relevant who can help me with config ?