[GPUC] GPU Coin | Mandatory Wallet Update

[gsupp]

Can someone please tell me if they can get the wallet working on XP and how they did so, rather than say something rude about needing to get a new computer like that last person - which is absolutely useless advice to me.

Otherwise I am selling my stake since I cannot receive it.

I know this really doesn't help but I'm running the wallet (v0.8.6.2) on XP and I haven't had any problems. What is happening with yours? Has the wallet fully synced with the network (lower right hand corner, green check mark)?

[xploreredfusion]

EU P2POOL
http://xploreredfusion.no-ip.biz:9404

24/24h.
Located in Italy (100 Mbps Fiber ) + Backup 4g Connection.
8 GB RAM
8 CORE
1% FEE.
JOIN NOW! ALREADY 100 Mh/s!



http://xploreredfusion.no-ip.biz:9404-u "YOUR ADDRESS" -p x
http://93.58.32.234:9404 -u "YOUR ADDRESS" -p x

• No registration. Point your miner and go!
• Automatic payout every block, increasing over the time
• Our node found a block with just 1 Mh/s!

[phaddie]

I feel like as soon as the IPO coins go out today that will be the end of this coin.  He has to have a market place going soon or there will be absolutely no pressure for the price to go up.  If he does indeed have 70k worth of cards, he should pick a price and start selling them.  He may not make lots but it will start the flow and get some buy pressure for this coin.  In a few hours when we all get our coins, it is going to be dump city.

  Phad,.

[illiki23]

Can someone please tell me if they can get the wallet working on XP and how they did so, rather than say something rude about needing to get a new computer like that last person - which is absolutely useless advice to me.

Otherwise I am selling my stake since I cannot receive it.

I know this really doesn't help but I'm running the wallet (v0.8.6.2) on XP and I haven't had any problems. What is happening with yours? Has the wallet fully synced with the network (lower right hand corner, green check mark)?

I unzipped the latest client, when I try to run it it gives an error message about the genesis block not being found and then forces me to close it.

Nothing is generated in the AppData folder.

I usually just unzip the wallet client (and other files with it) and it runs.  First time I am having problems with a wallet on this computer.

[Ritual]

Can someone please tell me if they can get the wallet working on XP and how they did so, rather than say something rude about needing to get a new computer like that last person - which is absolutely useless advice to me.

Otherwise I am selling my stake since I cannot receive it.

I know this really doesn't help but I'm running the wallet (v0.8.6.2) on XP and I haven't had any problems. What is happening with yours? Has the wallet fully synced with the network (lower right hand corner, green check mark)?

I unzipped the latest client, when I try to run it it gives an error message about the genesis block not being found and then forces me to close it.

Nothing is generated in the AppData folder.

I usually just unzip the wallet client (and other files with it) and it runs.  First time I am having problems with a wallet on this computer.

You have the old client installed. So go to User/<yourname>/AppData/Roaming/GPUCoin and delete everything EXCEPT your wallet.dat. Then re-run the client. EDIT: The correct client is located in <directory>/GPUCoin. It is NOT GPUCWindowsQT. That's the old one and it won't work.

You can also try a conf file, which should be in the same directory:

Code:

rpcuser=<your username>
rpcpassword=<your pass>
rpcport=<I picked 6857>
daemon=1
server=1
rpcallowip=127.0.0.1
addnode=188.226.166.12
addnode=107.170.227.7
addnode=188.226.169.204
addnode=128.199.220.62
addnode=107.170.36.126

Please note that my conf file is setup in case I want to solo-mine, which is not really a great idea tbh. All you probably need are the addnode lines.

[illiki23]

Can someone please tell me if they can get the wallet working on XP and how they did so, rather than say something rude about needing to get a new computer like that last person - which is absolutely useless advice to me.

Otherwise I am selling my stake since I cannot receive it.

I know this really doesn't help but I'm running the wallet (v0.8.6.2) on XP and I haven't had any problems. What is happening with yours? Has the wallet fully synced with the network (lower right hand corner, green check mark)?

I unzipped the latest client, when I try to run it it gives an error message about the genesis block not being found and then forces me to close it.

Nothing is generated in the AppData folder.

I usually just unzip the wallet client (and other files with it) and it runs.  First time I am having problems with a wallet on this computer.

You have the old client installed. So go to User/<yourname>/AppData/Roaming/GPUCoin and delete everything EXCEPT your wallet.dat. Then re-run the client.

You can also try a conf file, which should be in the same directory:

Code:

rpcuser=<your username>
rpcpassword=<your pass>
rpcport=<I picked 6857>
daemon=1
server=1
rpcallowip=127.0.0.1
addnode=188.226.166.12
addnode=107.170.227.7
addnode=188.226.169.204
addnode=128.199.220.62
addnode=107.170.36.126

Please note that my conf file is setup in case I want to solo-mine, which is not really a great idea tbh. All you probably need are the addnode lines.

*sighs*

THERE IS NOTHING IN APPDATA.

This is literally the third time I have been given these instructions.  They do not work.  Please if anyone has advice do not repeat this.

[cozk]

Price is shit and diff is way too high.

Why ?

Good job premining and throwing million of coins everywhere for a few BTC.

[Ritual]

Can someone please tell me if they can get the wallet working on XP and how they did so, rather than say something rude about needing to get a new computer like that last person - which is absolutely useless advice to me.

Otherwise I am selling my stake since I cannot receive it.

I know this really doesn't help but I'm running the wallet (v0.8.6.2) on XP and I haven't had any problems. What is happening with yours? Has the wallet fully synced with the network (lower right hand corner, green check mark)?

I unzipped the latest client, when I try to run it it gives an error message about the genesis block not being found and then forces me to close it.

Nothing is generated in the AppData folder.

I usually just unzip the wallet client (and other files with it) and it runs.  First time I am having problems with a wallet on this computer.

You have the old client installed. So go to User/<yourname>/AppData/Roaming/GPUCoin and delete everything EXCEPT your wallet.dat. Then re-run the client.

You can also try a conf file, which should be in the same directory:

Code:

rpcuser=<your username>
rpcpassword=<your pass>
rpcport=<I picked 6857>
daemon=1
server=1
rpcallowip=127.0.0.1
addnode=188.226.166.12
addnode=107.170.227.7
addnode=188.226.169.204
addnode=128.199.220.62
addnode=107.170.36.126

Please note that my conf file is setup in case I want to solo-mine, which is not really a great idea tbh. All you probably need are the addnode lines.

*sighs*

THERE IS NOTHING IN APPDATA.

*sighs*

Then that's fucking fine. You're STILL running the old client, you dope.

People are trying to help you here. Less of the *sighs*.

EDIT: Oh sorry! I didn't realise I was spamming the same shit advice for the third time! If you had read the goddamn instructions you were given the first time, you'd be up and running by now though! Can I ask how you will sell your stake when you can't even get the wallet working for your receive address? I'll buy the damn IPO from you for ...hmmm... 0.01 BTC! And I'll even throw in free tech support so you can transfer it to me.

Rit.

[illiki23]

Can someone please tell me if they can get the wallet working on XP and how they did so, rather than say something rude about needing to get a new computer like that last person - which is absolutely useless advice to me.

Otherwise I am selling my stake since I cannot receive it.

I know this really doesn't help but I'm running the wallet (v0.8.6.2) on XP and I haven't had any problems. What is happening with yours? Has the wallet fully synced with the network (lower right hand corner, green check mark)?

I unzipped the latest client, when I try to run it it gives an error message about the genesis block not being found and then forces me to close it.

Nothing is generated in the AppData folder.

I usually just unzip the wallet client (and other files with it) and it runs.  First time I am having problems with a wallet on this computer.

You have the old client installed. So go to User/<yourname>/AppData/Roaming/GPUCoin and delete everything EXCEPT your wallet.dat. Then re-run the client.

You can also try a conf file, which should be in the same directory:

Code:

rpcuser=<your username>
rpcpassword=<your pass>
rpcport=<I picked 6857>
daemon=1
server=1
rpcallowip=127.0.0.1
addnode=188.226.166.12
addnode=107.170.227.7
addnode=188.226.169.204
addnode=128.199.220.62
addnode=107.170.36.126

Please note that my conf file is setup in case I want to solo-mine, which is not really a great idea tbh. All you probably need are the addnode lines.

*sighs*

THERE IS NOTHING IN APPDATA.

*sighs*

Then that's fucking fine. You're STILL running the old client, you dope.

People are trying to help you here. Less of the *sighs*.

Rit.

I said clearly there was nothing in appdata to remove and your response was to remove the stuff in appdata.

I don't want help from people who just repeat the same things that are not working.  It is just frustrating.  If you cannot read the description of my problem please stop parroting the generic advice.

[SP4RK7]

Can someone please tell me if they can get the wallet working on XP and how they did so, rather than say something rude about needing to get a new computer like that last person - which is absolutely useless advice to me.

Otherwise I am selling my stake since I cannot receive it.

I know this really doesn't help but I'm running the wallet (v0.8.6.2) on XP and I haven't had any problems. What is happening with yours? Has the wallet fully synced with the network (lower right hand corner, green check mark)?

I unzipped the latest client, when I try to run it it gives an error message about the genesis block not being found and then forces me to close it.

Nothing is generated in the AppData folder.

I usually just unzip the wallet client (and other files with it) and it runs.  First time I am having problems with a wallet on this computer.

You can also try a conf file, which should be in the same directory:

Code:

rpcuser=<your username>
rpcpassword=<your pass>
rpcport=<I picked 6857>
daemon=1
server=1
rpcallowip=127.0.0.1
addnode=188.226.166.12
addnode=107.170.227.7
addnode=188.226.169.204
addnode=128.199.220.62
addnode=107.170.36.126

Please note that my conf file is setup in case I want to solo-mine, which is not really a great idea tbh. All you probably need are the addnode lines.

*sighs*

THERE IS NOTHING IN APPDATA.

This is literally the third time I have been given these instructions.  They do not work.  Please if anyone has advice do not repeat this.

Are you sure you have the latest wallet? If I remeber correectly when uzipped only thing there was the wallet-qt and gpucoindeamon.exe

[Ritual]

Can someone please tell me if they can get the wallet working on XP and how they did so, rather than say something rude about needing to get a new computer like that last person - which is absolutely useless advice to me.

Otherwise I am selling my stake since I cannot receive it.

I know this really doesn't help but I'm running the wallet (v0.8.6.2) on XP and I haven't had any problems. What is happening with yours? Has the wallet fully synced with the network (lower right hand corner, green check mark)?

I unzipped the latest client, when I try to run it it gives an error message about the genesis block not being found and then forces me to close it.

Nothing is generated in the AppData folder.

I usually just unzip the wallet client (and other files with it) and it runs.  First time I am having problems with a wallet on this computer.

You have the old client installed. So go to User/<yourname>/AppData/Roaming/GPUCoin and delete everything EXCEPT your wallet.dat. Then re-run the client.

You can also try a conf file, which should be in the same directory:

Code:

rpcuser=<your username>
rpcpassword=<your pass>
rpcport=<I picked 6857>
daemon=1
server=1
rpcallowip=127.0.0.1
addnode=188.226.166.12
addnode=107.170.227.7
addnode=188.226.169.204
addnode=128.199.220.62
addnode=107.170.36.126

Please note that my conf file is setup in case I want to solo-mine, which is not really a great idea tbh. All you probably need are the addnode lines.

*sighs*

THERE IS NOTHING IN APPDATA.

*sighs*

Then that's fucking fine. You're STILL running the old client, you dope.

People are trying to help you here. Less of the *sighs*.

Rit.

I said clearly there was nothing in appdata to remove and your response was to remove the stuff in appdata.

I don't want help from people who just repeat the same things that are not working.  It is just frustrating.  If you cannot read the description of my problem please stop parroting the generic advice.

You're running the old client, you ungrateful ass.

[illiki23]

Can someone please tell me if they can get the wallet working on XP and how they did so, rather than say something rude about needing to get a new computer like that last person - which is absolutely useless advice to me.

Otherwise I am selling my stake since I cannot receive it.

I know this really doesn't help but I'm running the wallet (v0.8.6.2) on XP and I haven't had any problems. What is happening with yours? Has the wallet fully synced with the network (lower right hand corner, green check mark)?

I unzipped the latest client, when I try to run it it gives an error message about the genesis block not being found and then forces me to close it.

Nothing is generated in the AppData folder.

I usually just unzip the wallet client (and other files with it) and it runs.  First time I am having problems with a wallet on this computer.

You have the old client installed. So go to User/<yourname>/AppData/Roaming/GPUCoin and delete everything EXCEPT your wallet.dat. Then re-run the client.

You can also try a conf file, which should be in the same directory:

Code:

rpcuser=<your username>
rpcpassword=<your pass>
rpcport=<I picked 6857>
daemon=1
server=1
rpcallowip=127.0.0.1
addnode=188.226.166.12
addnode=107.170.227.7
addnode=188.226.169.204
addnode=128.199.220.62
addnode=107.170.36.126

Please note that my conf file is setup in case I want to solo-mine, which is not really a great idea tbh. All you probably need are the addnode lines.

*sighs*

THERE IS NOTHING IN APPDATA.

*sighs*

Then that's fucking fine. You're STILL running the old client, you dope.

People are trying to help you here. Less of the *sighs*.

Rit.

I said clearly there was nothing in appdata to remove and your response was to remove the stuff in appdata.

I don't want help from people who just repeat the same things that are not working.  It is just frustrating.  If you cannot read the description of my problem please stop parroting the generic advice.

You're running the old client, you ungrateful ass.

I am running the latest client that was posted. 
I unzipped it to a different directory and am not using the old one.
There is nothing in the appdata file to delete.

[illiki23]

Can someone please tell me if they can get the wallet working on XP and how they did so, rather than say something rude about needing to get a new computer like that last person - which is absolutely useless advice to me.

Otherwise I am selling my stake since I cannot receive it.

I know this really doesn't help but I'm running the wallet (v0.8.6.2) on XP and I haven't had any problems. What is happening with yours? Has the wallet fully synced with the network (lower right hand corner, green check mark)?

I unzipped the latest client, when I try to run it it gives an error message about the genesis block not being found and then forces me to close it.

Nothing is generated in the AppData folder.

I usually just unzip the wallet client (and other files with it) and it runs.  First time I am having problems with a wallet on this computer.

You can also try a conf file, which should be in the same directory:

Code:

rpcuser=<your username>
rpcpassword=<your pass>
rpcport=<I picked 6857>
daemon=1
server=1
rpcallowip=127.0.0.1
addnode=188.226.166.12
addnode=107.170.227.7
addnode=188.226.169.204
addnode=128.199.220.62
addnode=107.170.36.126

Please note that my conf file is setup in case I want to solo-mine, which is not really a great idea tbh. All you probably need are the addnode lines.

*sighs*

THERE IS NOTHING IN APPDATA.

This is literally the third time I have been given these instructions.  They do not work.  Please if anyone has advice do not repeat this.

Are you sure you have the latest wallet? If I remeber correectly when uzipped only thing there was the wallet-qt and gpucoindeamon.exe

Yes.

Those are the two files I have as well.

[SP4RK7]

Can someone please tell me if they can get the wallet working on XP and how they did so, rather than say something rude about needing to get a new computer like that last person - which is absolutely useless advice to me.

Otherwise I am selling my stake since I cannot receive it.

I know this really doesn't help but I'm running the wallet (v0.8.6.2) on XP and I haven't had any problems. What is happening with yours? Has the wallet fully synced with the network (lower right hand corner, green check mark)?

I unzipped the latest client, when I try to run it it gives an error message about the genesis block not being found and then forces me to close it.

Nothing is generated in the AppData folder.

I usually just unzip the wallet client (and other files with it) and it runs.  First time I am having problems with a wallet on this computer.

You can also try a conf file, which should be in the same directory:

Code:

rpcuser=<your username>
rpcpassword=<your pass>
rpcport=<I picked 6857>
daemon=1
server=1
rpcallowip=127.0.0.1
addnode=188.226.166.12
addnode=107.170.227.7
addnode=188.226.169.204
addnode=128.199.220.62
addnode=107.170.36.126

Please note that my conf file is setup in case I want to solo-mine, which is not really a great idea tbh. All you probably need are the addnode lines.

*sighs*

THERE IS NOTHING IN APPDATA.

This is literally the third time I have been given these instructions.  They do not work.  Please if anyone has advice do not repeat this.

Are you sure you have the latest wallet? If I remeber correectly when uzipped only thing there was the wallet-qt and gpucoindeamon.exe

Yes.

Those are the two files I have as well.

I would do a windows search of all files and folders on your pc including hidden files and folders and delete anything related to gpucoin.

Re-download the client and see if that works.

[illiki23]

I would do a windows search of all files and folders on your pc including hidden files and folders and delete anything related to gpucoin.

Re-download the client and see if that works.

Thanks, I will try this.

[vesperwillow]

If the folder isn't there, how about creating it and placing the files there by hand?

[XBATTO]

wow bittrex is major fail. I put an order for:
53000 GPUC @ .00000012    .... That should total 0.00636 btc right?
It lists the total  price as .01 btc. yeah fuck thsi site

Different math I guess..?

sum(BTC) + all of the above sum(BTC)
it adds up

[laterbreh]

http://GPU.leetpools.com

DDOS PROTECTED - NO DOWN TIME
USA - TOP OF THE LINE SERVER
PROP/VARDIFF
0% FEE PROMO

All of our miners have been paid!! Join our pool for no bullshit, and stability.

[bigjme]

Hmm this coin is no profitable for miners in the UK.  Making about 2400 coins a day at current value is £1.26
About the same as the electric bill. Ooh well

[Ritual]

If the folder isn't there, how about creating it and placing the files there by hand?

This is also very good advice. But ofc the asker will spit the dummy out of his pram and reject it. The twat.