[ANN] [XMG] MAGI | CPU mining | mPoW | mPoS | [MagiPay]

[xms]

http://www.blockchaindynamics.net/voting.html

Friendliest Community 2016

[ X ] Magi

Nothing more to say I think  

Bumping this towards the top of the new page - maybe it'll attract a few more votes =)

Voted! Thanks for link Vin!
And for the bump Starmman.

Hey crypto friends

Voted for magi too

[ x ] magi

gr xms

[Abiky]

The latest code v1.3.1 is live on the master branch [https://github.com/magi-project/magi]. The Qt was tweaked the most and all prior issues were fixed. Remaining issues are likely broken daemon compilation at this moment, and a bit more tweaks for OSX too; I'll fix.

If you can't wait for official compiled wallet, pls do so of compilation on your own. We're using LevelDB; if you're upgrading from version prior to v1.3.0, pls sync from scratch, or download (a while ago): http://coinmagi.org/bin/block-chain.

Great. Thanks for the update, Joe! It's been quite some time since I left out of buying and staking Magi, since I have been very busy with things like college, among other stuff, but I would gladly get back into Magi soon as it is one of the best altcoin out there.

Hopefully, with the release of the new QT wallet, Magi could get even more attention and increase in price. I wish that Magi could reach $0.05 USD or higher this year.

Nevertheless, I'm looking forward for more exciting news like these. 


By the way, do you happen to know how do I compile the Magi wallet for Raspberry Pi 3? I'm trying to figure it out, but haven't gone anywhere as I'm not very tech savvy. Any help would be greatly appreciated. 

[joelao95]

Great. Thanks for the update, Joe! It's been quite some time since I left out of buying and staking Magi, since I have been very busy with things like college, among other stuff, but I would gladly get back into Magi soon as it is one of the best altcoin out there.

Hopefully, with the release of the new QT wallet, Magi could get even more attention and increase in price. I wish that Magi could reach $0.05 USD or higher this year.

Nevertheless, I'm looking forward for more exciting news like these.  


By the way, do you happen to know how do I compile the Magi wallet for Raspberry Pi 3? I'm trying to figure it out, but haven't gone anywhere as I'm not very tech savvy. Any help would be greatly appreciated.  

Glad to see you again. It's been some time for me on the work stuffs as well. I'm not yet into Raspberry, but someone did a guide as I remember. I'll try to find it out. Also I'm interested to get a Pi like for staking; either way I'll figure out a guide.  

[111magic]

Great. Thanks for the update, Joe! It's been quite some time since I left out of buying and staking Magi, since I have been very busy with things like college, among other stuff, but I would gladly get back into Magi soon as it is one of the best altcoin out there.

Hopefully, with the release of the new QT wallet, Magi could get even more attention and increase in price. I wish that Magi could reach $0.05 USD or higher this year.

Nevertheless, I'm looking forward for more exciting news like these.  


By the way, do you happen to know how do I compile the Magi wallet for Raspberry Pi 3? I'm trying to figure it out, but haven't gone anywhere as I'm not very tech savvy. Any help would be greatly appreciated.  

Glad to see you again. It's been some time for me on the work stuffs as well. I'm not yet into Raspberry, but someone did a guide as I remember. I'll try to find it out. Also I'm interested to get a Pi like for staking; either way I'll figure out a guide.  

You mean this one Joe: https://raspi2miner.wordpress.com/tag/xmg/

https://www.google.nl/url?sa=t&source=web&rct=j&url=/amp/s/raspi2miner.wordpress.com/2015/11/29/magicoin-xmg-miner-for-raspberry-pi-2/amp/&ved=0ahUKEwjCvuS_gsvRAhWJQBoKHaa5C4AQFgglMAI&usg=AFQjCNE_RoINm_s-5sO0pyiyuDWQIwL55Q&sig2=5hb0G-5SD0jPSZ-jMsEmjg

[starmman]

Great. Thanks for the update, Joe! It's been quite some time since I left out of buying and staking Magi, since I have been very busy with things like college, among other stuff, but I would gladly get back into Magi soon as it is one of the best altcoin out there.

Hopefully, with the release of the new QT wallet, Magi could get even more attention and increase in price. I wish that Magi could reach $0.05 USD or higher this year.

Nevertheless, I'm looking forward for more exciting news like these.  


By the way, do you happen to know how do I compile the Magi wallet for Raspberry Pi 3? I'm trying to figure it out, but haven't gone anywhere as I'm not very tech savvy. Any help would be greatly appreciated.  

Glad to see you again. It's been some time for me on the work stuffs as well. I'm not yet into Raspberry, but someone did a guide as I remember. I'll try to find it out. Also I'm interested to get a Pi like for staking; either way I'll figure out a guide.  

You mean this one Joe: https://raspi2miner.wordpress.com/tag/xmg/

https://www.google.nl/url?sa=t&source=web&rct=j&url=/amp/s/raspi2miner.wordpress.com/2015/11/29/magicoin-xmg-miner-for-raspberry-pi-2/amp/&ved=0ahUKEwjCvuS_gsvRAhWJQBoKHaa5C4AQFgglMAI&usg=AFQjCNE_RoINm_s-5sO0pyiyuDWQIwL55Q&sig2=5hb0G-5SD0jPSZ-jMsEmjg

I might give that a go myself some time. I want to also start researching how to create apt-get packages - would be great to have a apt-get install magi-pi

Welcome back Abiky good to see you on the forums again

[killerjoegreece]

Can i get the windows 1.3.1 windows exe from somewhere , and how much ram does the wallet take up fully synced?

[My9bot]

The latest code v1.3.1 is live on the master branch [https://github.com/magi-project/magi]. The Qt was tweaked the most and all prior issues were fixed. Remaining issues are likely broken daemon compilation at this moment, and a bit more tweaks for OSX too; I'll fix.

If you can't wait for official compiled wallet, pls do so of compilation on your own. We're using LevelDB; if you're upgrading from version prior to v1.3.0, pls sync from scratch, or download (a while ago): http://coinmagi.org/bin/block-chain.

Great. Thanks for the update, Joe! It's been quite some time since I left out of buying and staking Magi, since I have been very busy with things like college, among other stuff, but I would gladly get back into Magi soon as it is one of the best altcoin out there.

Hopefully, with the release of the new QT wallet, Magi could get even more attention and increase in price. I wish that Magi could reach $0.05 USD or higher this year.

Nevertheless, I'm looking forward for more exciting news like these. 


By the way, do you happen to know how do I compile the Magi wallet for Raspberry Pi 3? I'm trying to figure it out, but haven't gone anywhere as I'm not very tech savvy. Any help would be greatly appreciated. 

hey i using my pi2 for staking
i can help building magid on a pi

[My9bot]

Build your MagiCoin XMG Wallet
tested at pi2

Code:

sudo apt-get update
sudo apt-get upgrade

sudo apt-get install -y gcc-4.9 g++-4.9
sudo apt-get install -y libgmp-dev libcurl4-openssl-dev libjansson-dev git

sudo apt-get install -y libdb5.3-dev libdb5.3++-dev
sudo apt-get install -y libboost-all-dev
sudo apt-get install -y libqrencode-dev
sudo apt-get install -y libminiupnpc-dev libminiupnpc

for v1.3.0-RC :

Code:

BRANCH="1.3.0rc"
mkdir $BRANCH
cd $BRANCH
git init
git remote add -t $BRANCH -f origin https://github.com/magi-project/magi.git
git checkout $BRANCH

cd src/

Now edit your makefile.unix
goto line 108 :

Code:

ifeq ($(xCPUARCH),armv7l)

and replace it with :

Code:

ifeq ($(xCPUARCH),armv7l)
xCXXFLAGS+=-Ofast -mcpu=cortex-a7 -mfpu=neon-vfpv4 -mfloat-abi=hard

now build magid with :

Code:

make -f makefile.unix xCPUARCH=armv7l

[111magic]

Very nice My9bot! Awesome job.

[starmman]

Build your MagiCoin XMG Wallet
tested at pi2

Code:

sudo apt-get update
sudo apt-get upgrade

sudo apt-get install -y gcc-4.9 g++-4.9
sudo apt-get install -y libgmp-dev libcurl4-openssl-dev libjansson-dev git

sudo apt-get install -y libdb5.3-dev libdb5.3++-dev
sudo apt-get install -y libboost-all-dev
sudo apt-get install -y libqrencode-dev
sudo apt-get install -y libminiupnpc-dev libminiupnpc

for v1.3.0-RC :

Code:

BRANCH="1.3.0rc"
mkdir $BRANCH
cd $BRANCH
git init
git remote add -t $BRANCH -f origin https://github.com/magi-project/magi.git
git checkout $BRANCH

cd src/

Now edit your makefile.unix
goto line 108 :

Code:

ifeq ($(xCPUARCH),armv7l)

and replace it with :

Code:

ifeq ($(xCPUARCH),armv7l)
xCXXFLAGS+=-Ofast -mcpu=cortex-a7 -mfpu=neon-vfpv4 -mfloat-abi=hard

now build magid with :

Code:

make -f makefile.unix xCPUARCH=armv7l

Thanks very much for sharing - hopefully I'll get a chance to give this a go at the weekend - I currently only use my pi as a media centre - would be great to get it staking too - also considering trying to get it to stake using solar power

[111magic]

All interest shares (from the Proof of Interest campaign IV) will be paid in the next days. Keep eyes on your wallet!

[goldlabel]

All interest shares (from the Proof of Interest campaign IV) will be paid in the next days. Keep eyes on your wallet!

Sry cant do, i need my eyes for my work

[111magic]

All interest shares (from the Proof of Interest campaign IV) will be paid in the next days. Keep eyes on your wallet!

Sry cant do, i need my eyes for my work

Lol haha thats funny amigo!

[joelao95]

Can i get the windows 1.3.1 windows exe from somewhere , and how much ram does the wallet take up fully synced?

I'll get it out soon, and will provide an up-to-date blockchain so you won't need sync from scratch.

[joelao95]

... apt-get install magi-pi

...

This is cool; I like it..

[joelao95]

Build your MagiCoin XMG Wallet
...
sudo apt-get install -y libdb5.3-dev libdb5.3++-dev
...

I appreciated your efforts, and the guide is very helpful; probably I'd mention that installing db4.8 instead of the new version is strongly recommended. Unfortunately, that might need compiling from source code; the corresponding binary package is likely unavailable.  

[111magic]

Good news for the Magi community.
Proof of Interest campaign IV:

Interest 6.7% 

Last interest-shares will be paid today!!

[The Frisian]

I have a problem with the wallet:



After a while the connections go back from 4 until 0 and the program says wallet offline.

What can be the problem?

So much staking and so a low reward is also not right....

Any ideas?

[starmman]

I have a problem with the wallet:



After a while the connections go back from 4 until 0 and the program says wallet offline.

What can be the problem?

So much staking and so a low reward is also not right....

Any ideas?

Hi,

Do you have the following nodes in your magi.conf?
addnode=104.128.225.215
addnode=104.131.42.100

That staking reward does look a bit low for such a huge amount. Not sure on the technicalities of that, maybe its calculated in a different way - I think you are already using the split and combine mecahnisms, so wont ask about that.

EDIT: just spotted the network weight - that doesn't look right at all (unless its to do with the small number of connections) - I wonder if you are on an incorrect block chain - I'd be inclined to try to resync it if the addnodes list don't improve the situation

You can find some more nodes here:
https://chainz.cryptoid.info/xmg/#!network

[starmman]

Good news for the Magi community.
Proof of Interest campaign IV:

Interest 6.7% 

Last interest-shares will be paid today!!

Great news - I hope I managed to follow all the rules correctly =)