[ANN] [XMG] MAGI | CPU mining | mPoW | mPoS | [MagiPay]

[Ginzink]

I like Magi's concept, i like the fair mining & unique blockreward system, i like the awesome Magi community with more than 1000 pages on bitcointalk without fud, i like the start without ico & more

Yeah it seems like a promising project. Dont have alot invested but it apears to be very undervalued at the moment. Old coin with a steady team. Considering to start mining after fork so my cpu can for its part as well :p

[111magic]

I like Magi's concept, i like the fair mining & unique blockreward system, i like the awesome Magi community with more than 1000 pages on bitcointalk without fud, i like the start without ico & more

Yeah it seems like a promising project. Dont have alot invested but it apears to be very undervalued at the moment. Old coin with a steady team. Considering to start mining after fork so my cpu can for its part as well :p

Thanks for the nice words here & welcome in our friendly Magi community

[crnkoj]

Request for all working pools!!
Please quote this post & add working pool in it!
That way i can see what pool i need to contact to inform about new releases. Thanks in advance.

Hi, been using this pool a bit, seems to not be updated as of now.
http://pool.mineproject.ru/explorer

[JeFeCiYo]

I've updated my wallet to the latest version and I'm still getting "connection refused" from Minerclaim, is it correct?

[111magic]

I've updated my wallet to the latest version and I'm still getting "connection refused" from Minerclaim, is it correct?

Yes minerclaim will update later.

[ljuni0rl]

I updated my wallet to the latest version but the coins are not staking. Do i need to do anything ? can anyone advise.

[cryptcoin84]

I updated my wallet to the latest version but the coins are not staking. Do i need to do anything ? can anyone advise.

I have done the update as well and staking is not working properly too.
The hardfork will teake place at 2200 CET Local time (4:00 PM EST, 2100 UTC).
Propably we kann expect working staking and mining reward distribution after the Hardfork.

[Ginzink]

Downloaded the new wallet, will move my coins over after a couple days as its risky now with the fork.
Then i can stake, but can you solo mine directly from wallet with console commands? Hoping for some low hashrate the first days until pool is up so maybe i get lucky

[ljuni0rl]

Downloaded the new wallet, will move my coins over after a couple days as its risky now with the fork.
Then i can stake, but can you solo mine directly from wallet with console commands? Hoping for some low hashrate the first days until pool is up so maybe i get lucky

I tried the solo mining but not working either.

[jiyef002]

Hi,

Yesterday, I read this article : http://everythingesp.com/bitcoin-mining-with-esp8266/. It's about a guy who created a Proof of Concept of a bitcoin miner on an ESP8266 µC. As the ESP8266 is not powerful compared to normal CPU, the hashrate is very low, and this project should be totally useless.

But I was wondering : as Magi targets more energy efficiency, and is already running of SBC (RaspberryPi,...), would it be possible/useful to mine XMG on ESP8266 (single core, 80Mhz, 96KB RAM) or ESP32 (dualcore 240Mhz, 520KB RAM)? These CPU embed Wifi and consome far less energy than SBCs and desktop compuers.
What are the ressources requirements for the M7M hash algorithm? I think RAM would be the bottleneck.
Could you point me to some docs about the algo?

Thanks

[andrew2221]

I have also updated the wallet, it shows the current amount of XMG correctly, but the price in $ is 0, whereas the previous wallet showed the $ price as well. Is this a bug?

[Jeremy450]

I have also updated the wallet, it shows the current amount of XMG correctly, but the price in $ is 0, whereas the previous wallet showed the $ price as well. Is this a bug?

i found same issue. but if you double click on the usd/xmg price it will update.

[xms]

magi coin need update his social channel
on coinmarketcap.com
need to add reddit talk
and on twitter
insted of @CoinMagi (that is not active) update to @Coin_Magi_XMG

that way more buzz and people will trust the coin

I suggest other people fill out CM's form too in order to update relevant info. I tried informing them about updating logo, adding novaexchange, obviously ignored. To clarify, @CoinMagi is mainly for announcement, and @Coin_Magi_XMG for multiple info; I agree the social channel on CM should be switched.

hello joelao95,

the wallet shows only fiat in dollars,
is there a posibilty to change this to euro

gr xms

[shroomzcoin]

Hi,

Yesterday, I read this article : http://everythingesp.com/bitcoin-mining-with-esp8266/. It's about a guy who created a Proof of Concept of a bitcoin miner on an ESP8266 µC. As the ESP8266 is not powerful compared to normal CPU, the hashrate is very low, and this project should be totally useless.

But I was wondering : as Magi targets more energy efficiency, and is already running of SBC (RaspberryPi,...), would it be possible/useful to mine XMG on ESP8266 (single core, 80Mhz, 96KB RAM) or ESP32 (dualcore 240Mhz, 520KB RAM)? These CPU embed Wifi and consome far less energy than SBCs and desktop compuers.
What are the ressources requirements for the M7M hash algorithm? I think RAM would be the bottleneck.
Could you point me to some docs about the algo?

Thanks

I would research the device more, i couldnt find to much information on it, but from what ive read the m7m algo goes off the cache in the processor and mining actually uses very little memory hence why its possible on pi's, i doubt its impossible to get one to mine xmg but you would probably have to write your own miner or heavily modify one of the current ones to run on the xtensia 32bit processor and would expect 0.5h's, and it depends which version the esp32 uses, when looking on the xtensia chip each one is customised to the manufacturers specifications. It's all open source so you can see all the code at https://github.com/magi-project/magi. I think the xtensia chip could actually be quite use full to mine xmg and aeon when looking on the custom order section for the chips, but for someone who is prepared to custom order 100+ chips and build their own usb or asic type miner.

[jiyef002]

I would research the device more, i couldnt find to much information on it, but from what ive read the m7m algo goes off the cache in the processor and mining actually uses very little memory hence why its possible on pi's, i doubt its impossible to get one to mine xmg but you would probably have to write your own miner or heavily modify one of the current ones to run on the xtensia 32bit processor and would expect 0.5h's, and it depends which version the esp32 uses, when looking on the xtensia chip each one is customised to the manufacturers specifications. It's all open source so you can see all the code at https://github.com/magi-project/magi. I think the xtensia chip could actually be quite use full to mine xmg and aeon when looking on the custom order section for the chips, but for someone who is prepared to custom order 100+ chips and build their own usb or asic type miner.

ESP's are very well known by the makers community. There are used for a lot of DIY projects about home-automation, IoT,... They are very cheap and available. Espressif provide a C SDK, and it is supported by many frameworks like Arduino and MicroPython.

I know this project would need a lot of work to port/implement M7M on the device, but I find it interesting (even if it would not be very powerful).
I'll have a look at the code, but I would be interested in any documentation that would help anyone to implement the algo, so that I can see if I have the time/knowledge to try to do it by myself

[Stratobitz]

Price moving back up. Above 10000 currently on Bittrex off it's low. 

Cheers to the Dev Team and Happy New Years!

Strato

[amanguver64]

Hello everyone!

I was syncing my wallet when suddenly my computer crashed and I had to force restart. Now when I try to open the wallet I get a message saying 'error loading block database'. I think it got corrupted or something. 

Is there anyway to recover the block database? I was at 80%, it took days to reach there.

Thanks.

[shroomzcoin]

Hello everyone!

I was syncing my wallet when suddenly my computer crashed and I had to force restart. Now when I try to open the wallet I get a message saying 'error loading block database'. I think it got corrupted or something. 

Is there anyway to recover the block database? I was at 80%, it took days to reach there.

Thanks.

are you using the new wallet released yesterday?

[amanguver64]

Hello everyone!

I was syncing my wallet when suddenly my computer crashed and I had to force restart. Now when I try to open the wallet I get a message saying 'error loading block database'. I think it got corrupted or something. 

Is there anyway to recover the block database? I was at 80%, it took days to reach there.

Thanks.

are you using the new wallet released yesterday?

Yes.

[xms]

Hello everyone!

I was syncing my wallet when suddenly my computer crashed and I had to force restart. Now when I try to open the wallet I get a message saying 'error loading block database'. I think it got corrupted or something. 

Is there anyway to recover the block database? I was at 80%, it took days to reach there.

Thanks.

are you using the new wallet released yesterday?

for savety delete everything but NOT wallet.dat (backup),
download the chain (1,2gb), copy and paste and start again

gr xms