d57heinz
Legendary
 Offline
Activity: 1453
Merit: 1011
Bitcoin Talks Bullshit Walks
|
 |
November 30, 2016, 03:13:43 PM |
|
I am getting
0,125 ZEC on flypool (average over 2 days)
0,12 ZEC on dwarfpool (average over 1,5 days -- perhaps just bad luck)
standardized to 1000sol/s (displayed on pool not miner) in 24h average
whattomine says I can expect 0.1188 ZEC
Well I'm going to wait one more day. But what bothers me on dwarf is the discrepancy on payouts/share ratio. Maybe I don't fully understand hbpps that well. Thanks for letting me know According to calc I should be getting .89 ish per day. Diff is going up really fast. Almost 25% overnight!!! Ouch BR |
As in nature, all is ebb and tide, all is wave motion, so it seems that in all branches of industry, alternating currents - electric wave motion - will have the sway. ~Nikola Tesla~
|
|
|
pacolito
Jr. Member
Offline
Activity: 36
Merit: 5
|
|
November 30, 2016, 03:16:46 PM |
|
is anyone else not receiving payments from flypool the past 2-3 hours?
Sorry for posting this here but I figured many are using flypool in here.
Flypool is paying as usual, but if you are sending to Poloniex.... they have some delays and they are fixing it. Thanks for clearing that out for me. |
|
|
|
|
|
Selsonblue
|
|
November 30, 2016, 03:17:28 PM |
|
I am getting
0,125 ZEC on flypool (average over 2 days)
0,12 ZEC on dwarfpool (average over 1,5 days -- perhaps just bad luck)
standardized to 1000sol/s (displayed on pool not miner) in 24h average
whattomine says I can expect 0.1188 ZEC
I am getting about the same on Flypool. Havent seen anything better advertised so no need to switch. 1 kh/s - .125 ish daily payout. |
|
|
|
|
AriesIV10
Legendary
Offline
Activity: 1260
Merit: 1006
Mine for a Bit
|
|
November 30, 2016, 03:20:10 PM |
|
I am getting
0,125 ZEC on flypool (average over 2 days)
0,12 ZEC on dwarfpool (average over 1,5 days -- perhaps just bad luck)
standardized to 1000sol/s (displayed on pool not miner) in 24h average
whattomine says I can expect 0.1188 ZEC
Well I'm going to wait one more day. But what bothers me on dwarf is the discrepancy on payouts/share ratio. Maybe I don't fully understand hbpps that well. Thanks for letting me know According to calc I should be getting .89 ish per day. Diff is going up really fast. Almost 25% overnight!!! Ouch BR After 1 day, I am all out of Dwarfpool and back to Flypool. Keep us informed about the type of payout system for Dwarfpool. |
|
|
|
sorry2xs
Legendary
Offline
Activity: 924
Merit: 1000
Dark Passenger Bitcoin miner 2013,Bitcoin node
|
|
November 30, 2016, 03:21:11 PM |
|
we need a miner refresh
|
Please tip the Node 1MPWKB23NsZsXHANnFwVAWT86mL24fqAjF; KO4UX
THAT NO GOOD DO GOODER BAT!!!
|
|
|
wdiazyomi
Newbie
Offline
Activity: 23
Merit: 0
|
|
November 30, 2016, 03:34:50 PM |
|
we need a miner refresh
Version 9? yup, need for speed xD |
|
|
|
|
|
joaocha
|
|
November 30, 2016, 03:36:31 PM |
|
Go for www.f2pool.com , they pay right and almosta 0.125 day per 1khs |
|
|
|
|
|
Ursul0
|
|
November 30, 2016, 03:46:08 PM |
|
is anyone else not receiving payments from flypool the past 2-3 hours?
Sorry for posting this here but I figured many are using flypool in here.
yes. all works fine for me |
|
|
|
|
Taxidermista
Legendary
Offline
Activity: 1148
Merit: 1001
|
|
November 30, 2016, 03:47:59 PM |
|
This must sound stupid but I can't find a f*ckin clue anywhere, and I can't believe nobody has made this question before: how do you identify a specific gpu from 6 identical cards in a mining rig? The only thing special about this card is 10ºC more in GPU temperature. You can't tell it apart with your hand obviously. Is there any option in Claymore miner that can help with that?
|
|
|
|
|
Hotmetal
|
|
November 30, 2016, 03:53:24 PM |
|
This must sound stupid but I can't find a f*ckin clue anywhere, and I can't believe nobody has made this question before: how do you identify a specific gpu from 6 identical cards in a mining rig? The only thing special about this card is 10ºC more in GPU temperature. You can't tell it apart with your hand obviously. Is there any option in Claymore miner that can help with that?
A guy at work asked me the same question. The fastest method i suggested was to use Claymore to turn 1 fan to 100%. So easy to do on the fly and map your GPUs that way. |
|
|
|
|
AriesIV10
Legendary
Offline
Activity: 1260
Merit: 1006
Mine for a Bit
|
|
November 30, 2016, 03:54:46 PM |
|
Does anyone have a experience running the XFX R9 295 X2? SOLs/settings/temps/watts/...
|
|
|
|
|
joaocha
|
|
November 30, 2016, 03:58:57 PM |
|
This must sound stupid but I can't find a f*ckin clue anywhere, and I can't believe nobody has made this question before: how do you identify a specific gpu from 6 identical cards in a mining rig? The only thing special about this card is 10ºC more in GPU temperature. You can't tell it apart with your hand obviously. Is there any option in Claymore miner that can help with that?
press numpad numbers from 0 to 5, until you find whice gpu it is, once you find , enable all others and wait 3 minutes, them use your hand  |
|
|
|
|
yatta
Member
Offline
Activity: 93
Merit: 10
|
|
November 30, 2016, 03:59:29 PM |
|
This must sound stupid but I can't find a f*ckin clue anywhere, and I can't believe nobody has made this question before: how do you identify a specific gpu from 6 identical cards in a mining rig? The only thing special about this card is 10ºC more in GPU temperature. You can't tell it apart with your hand obviously. Is there any option in Claymore miner that can help with that?
A guy at work asked me the same question. The fastest method i suggested was to use Claymore to turn 1 fan to 100%. So easy to do on the fly and map your GPUs that way. atiflash -ai |
ETH 0xe3c8d2587e03ac3bdcb86794b8227c000db54d25
|
|
|
Taxidermista
Legendary
Offline
Activity: 1148
Merit: 1001
|
|
November 30, 2016, 04:04:46 PM |
|
This must sound stupid but I can't find a f*ckin clue anywhere, and I can't believe nobody has made this question before: how do you identify a specific gpu from 6 identical cards in a mining rig? The only thing special about this card is 10ºC more in GPU temperature. You can't tell it apart with your hand obviously. Is there any option in Claymore miner that can help with that?
A guy at work asked me the same question. The fastest method i suggested was to use Claymore to turn 1 fan to 100%. So easy to do on the fly and map your GPUs that way. I must be really stupid but I can't see any difference between a fan at 50% and a fan at 100% on these cards. |
|
|
|
|
Demarsac
|
|
November 30, 2016, 04:06:23 PM |
|
This must sound stupid but I can't find a f*ckin clue anywhere, and I can't believe nobody has made this question before: how do you identify a specific gpu from 6 identical cards in a mining rig? The only thing special about this card is 10ºC more in GPU temperature. You can't tell it apart with your hand obviously. Is there any option in Claymore miner that can help with that?
A guy at work asked me the same question. The fastest method i suggested was to use Claymore to turn 1 fan to 100%. So easy to do on the fly and map your GPUs that way. Yep. That's also what I do... I know its not the most fancy way but still gets the job done... |
|
|
|
|
|
Hotmetal
|
|
November 30, 2016, 04:07:28 PM |
|
I must be really stupid but I can't see any difference between a fan at 50% and a fan at 100% on these cards.
Turn the other fans to 5% and you'll notice a difference. |
|
|
|
|
|
Ursul0
|
|
November 30, 2016, 04:08:03 PM |
|
This must sound stupid but I can't find a f*ckin clue anywhere, and I can't believe nobody has made this question before: how do you identify a specific gpu from 6 identical cards in a mining rig? The only thing special about this card is 10ºC more in GPU temperature. You can't tell it apart with your hand obviously. Is there any option in Claymore miner that can help with that?
A guy at work asked me the same question. The fastest method i suggested was to use Claymore to turn 1 fan to 100%. So easy to do on the fly and map your GPUs that way. I must be really stupid but I can't see any difference between a fan at 50% and a fan at 100% on these cards. There's another thing that can help you - with Rx400 you can make custom bios and among other things set minimal fan speed to a unique for this gpu number. EDIT: and after setting proper -di order for claymore (you do it in conjunction with watttool - the order there is good) by disabling and anabling during runtime (you'll see activity drop from 100 to 0%) - you know it all |
|
|
|
|
|
Demarsac
|
|
November 30, 2016, 04:08:24 PM |
|
This must sound stupid but I can't find a f*ckin clue anywhere, and I can't believe nobody has made this question before: how do you identify a specific gpu from 6 identical cards in a mining rig? The only thing special about this card is 10ºC more in GPU temperature. You can't tell it apart with your hand obviously. Is there any option in Claymore miner that can help with that?
A guy at work asked me the same question. The fastest method i suggested was to use Claymore to turn 1 fan to 100%. So easy to do on the fly and map your GPUs that way. I must be really stupid but I can't see any difference between a fan at 50% and a fan at 100% on these cards. How do you change the speed? Through Claymore config or with wattman etc? 50% and 100% in fans speed have a big and obvious difference Maybe you are not really making it 100%? |
|
|
|
|
Jinx99
Member
Offline
Activity: 91
Merit: 10
|
|
November 30, 2016, 04:08:38 PM |
|
This must sound stupid but I can't find a f*ckin clue anywhere, and I can't believe nobody has made this question before: how do you identify a specific gpu from 6 identical cards in a mining rig? The only thing special about this card is 10ºC more in GPU temperature. You can't tell it apart with your hand obviously. Is there any option in Claymore miner that can help with that?
1. If you have RX 480 sapphire nitro cards - you can control LED lights on each card with latest Sapphire Trixx 2. with any other card - just set zero or max RPM of cooling fans for awhile in MSI AB or what you use. Do this when mining is stopped. |
|
|
|
|
|
TheRider
|
|
November 30, 2016, 04:17:25 PM |
|
Does anyone have a experience running the XFX R9 295 X2? SOLs/settings/temps/watts/...
560 Sols total, 1100 core, 1500 mem, 72C and 68C temps, no idea about power, probably around 450W. |
|
|
|
|
|
