|
BitJunkie556
|
 |
December 19, 2016, 10:55:33 PM |
|
thanks for your response guys. i have another question,i wanna build a rig that contain's 4 asus r9 390x dc2 8gb and 1 rx 480 4gb actually i feel fear when i think about this, i wanna spend alot of money and i am afraid of altcoins gonna be cheap in future. what shoud i do? is this predict possible? mining of etc and zcash is profitable in future? can you give me advise? extra information: i spend nothing for electricity
better build 5x rx470 4gb rig. "extra information: i spend nothing for electricity" No reason to go with 470s at all. 390/390x is definitely the way to go with zero power cost. I don't think this is necessarily true. I guess without power cost, maybe. But poster above is right. Beefier power supplies etc, make costs go way up. Likewise, try finding a 390 for less than 200, even used. Lowest I got mine for was like $185 out the door, but got lucky on ebay. $200 is more typical... Figuring that in, it costs more per hash than RX 470's... Although it may be balanced out by having to buy more motherboards, RAM, etc... But for me, where electricity still matters to some extend, the 470's massively lower w/sol would be my choice... Just for anyone wondering what the better deal *might* be in their circumstance. No. Going from 470 to 390/390x on a 6 card rig will require at most an extra 700W. That's a $100 PSU. If you don't think spending $200 ($100 PSU, $100 or so on GPU's) more to bump hash rate by 40%+ on free power then you shouldn't be building a rig to begin with. Already without the latest update promising even more hash/s on 390/390x they run close to 50% higher than 470s so with NO power cost. It's a total no brainer if you are building a rig. For one, an increase on Claymore miner's hashrate means difficulty goes up because everyone gets the increase. Second, yeah, if you are not paying for electricity, I can see the appeal of R9 390's. But 300 sol/s for 300 watts (ususally hashrate never gets that high...) vs ~210 sol/s for 100 watts sounds like a better deal to me. Well, mostly if someone were only building let's say, one 6-card rig. But I did make an error before. I guess when you consider not paying power, and also the additional cost of motherboards, cpu's, ram, etc, then the cost of a bigger PSU probably puts you under budget for the same hashrate... So I guess I didn't think about it all the way through.
|
|
|
|
ivomm
Legendary
Offline
Activity: 1933
Merit: 3428
All good things to those who wait
|
 |
December 19, 2016, 11:51:33 PM |
|
thanks for your response guys. i have another question,i wanna build a rig that contain's 4 asus r9 390x dc2 8gb and 1 rx 480 4gb actually i feel fear when i think about this, i wanna spend alot of money and i am afraid of altcoins gonna be cheap in future. what shoud i do? is this predict possible? mining of etc and zcash is profitable in future? can you give me advise? extra information: i spend nothing for electricity
better build 5x rx470 4gb rig. "extra information: i spend nothing for electricity" No reason to go with 470s at all. 390/390x is definitely the way to go with zero power cost. I don't think this is necessarily true. I guess without power cost, maybe. But poster above is right. Beefier power supplies etc, make costs go way up. Likewise, try finding a 390 for less than 200, even used. Lowest I got mine for was like $185 out the door, but got lucky on ebay. $200 is more typical... Figuring that in, it costs more per hash than RX 470's... Although it may be balanced out by having to buy more motherboards, RAM, etc... But for me, where electricity still matters to some extend, the 470's massively lower w/sol would be my choice... Just for anyone wondering what the better deal *might* be in their circumstance. No. Going from 470 to 390/390x on a 6 card rig will require at most an extra 700W. That's a $100 PSU. If you don't think spending $200 ($100 PSU, $100 or so on GPU's) more to bump hash rate by 40%+ on free power then you shouldn't be building a rig to begin with. Already without the latest update promising even more hash/s on 390/390x they run close to 50% higher than 470s so with NO power cost. It's a total no brainer if you are building a rig. For one, an increase on Claymore miner's hashrate means difficulty goes up because everyone gets the increase. Second, yeah, if you are not paying for electricity, I can see the appeal of R9 390's. But 300 sol/s for 300 watts (ususally hashrate never gets that high...) vs ~210 sol/s for 100 watts sounds like a better deal to me. Well, mostly if someone were only building let's say, one 6-card rig. But I did make an error before. I guess when you consider not paying power, and also the additional cost of motherboards, cpu's, ram, etc, then the cost of a bigger PSU probably puts you under budget for the same hashrate... So I guess I didn't think about it all the way through. You are comparing stock voltage 390 with undervolted 480. Mine 390 are undervolted -100 to -150 with the stock clock and memory (they work for weeks without crashes but the exact undervolting depends on the model; I use Trixx utility). They consume 200-210 W from the wall measured by watmeter. The whole rig with 6 390's consumes 1300 W at the peaks.
|
|
|
|
|
chronek
Sr. Member
  
Offline
Activity: 273
Merit: 250
BD People Are Legend
|
 |
December 20, 2016, 12:16:53 AM |
|
Well, will we see 10.0 tonight?  We will propably get that after 0.04 zec wall, when miner farms will change to something else and they will no longer prevent claymore from release next version 
|
|
|
|
mamboOo
Member

Offline
Activity: 76
Merit: 10
|
 |
December 20, 2016, 12:36:42 AM |
|
Guys,I want to know about RX 480 4Gb h/s in claymore can you give me a hand?
currently the average is around 220 h/s True. I'm on 16.11.5 drivers, 1333mhz core clock, 2100 mem clock, with -30 mV undervolt. I get up to about 225-230 sol/s. I'm on 16.11.5 drivers 1306 core clock, 1900 mem, -100mV 220-230 sol/s. (bios mem mod)
|
|
|
|
|
thedreamer
Legendary
Offline
Activity: 1694
Merit: 1002
Go Big or Go Home.....
|
 |
December 20, 2016, 01:08:22 AM |
|
Guys,I want to know about RX 480 4Gb h/s in claymore can you give me a hand?
currently the average is around 220 h/s True. I'm on 16.11.5 drivers, 1333mhz core clock, 2100 mem clock, with -30 mV undervolt. I get up to about 225-230 sol/s. I'm on 16.11.5 drivers 1306 core clock, 1900 mem, -100mV 220-230 sol/s. (bios mem mod) At that clock, even with the -100mV, you're using a ton of power. Less profitable than running stock speed or underclocked with less power.
|
Go Big or Go Home.
|
|
|
mamboOo
Member

Offline
Activity: 76
Merit: 10
|
 |
December 20, 2016, 01:31:38 AM |
|
Yes, that's right. My gpuz shows avg 80 - 90W
|
|
|
|
|
jelin1984
Legendary
Offline
Activity: 2408
Merit: 1004
|
 |
December 20, 2016, 01:35:17 AM |
|
i had 4 cards 3 asus and 1 saphire i mining and after some minutes saphire stop hashing'
how i can fix that?
|
|
|
|
|
elgi76
Member

Offline
Activity: 124
Merit: 10
|
 |
December 20, 2016, 01:46:34 AM |
|
i had 4 cards 3 asus and 1 saphire i mining and after some minutes saphire stop hashing'
how i can fix that?
rename your sapphire for asus ... so, no log, no more info ?
|
|
|
|
|
thedreamer
Legendary
Offline
Activity: 1694
Merit: 1002
Go Big or Go Home.....
|
 |
December 20, 2016, 02:13:49 AM |
|
Yes, that's right. My gpuz shows avg 80 - 90W
Which is like saying ".......I have Fast & Furious stickers on my car, so it has an extra 400HP....." Useless.. Put a real kill-a-watt on it and see what it really uses. 80-90watts will NOT be getting you 220Sols/sec with a 1305Mh Overclocked core and 1900 RAM. 
|
Go Big or Go Home.
|
|
|
smaxz
Sr. Member
  
Offline
Activity: 429
Merit: 253
VeganAcademy
|
 |
December 20, 2016, 02:47:30 AM |
|
Guys, I have a system with 5 GPUs, 3 R9 290 and 2 RX 480, all using usb risers with sata/molex adapter. He's been standing about 3 months 24/7. Today I smelled something burnt and found what is in the picture. Just the two that energized the RX 480. Do the RX 480 continue to extract more than pci_ex can support? Is there something wrong with my PSU? My RIG: Asrosk H81 Pro BTC Intel Celeron G1820 8GB RAM 3 R9 290 + 2 RX 480(all stock) USB risers Cougar GX 800 + Corsair CX 750  duude.. this is a typical newbie mistake. dont worry it happens. you need cooler cables. try to lookup "mining cables"... they will come in cooler colors, black is the worse ones. try to find ones with all white cables. put a fan pointed right at your cables until you fix this problem! unless you have the blue cables like me, they are watercooled. no fan needed. I know a guy who tried the watercooled route just by soaking all his plugs in a slightly saline solution of water overnight to get some good marinating effect before plugging them in. I would NOT recommend it.
|
- NGdTwHRSdnThdi1drQuHGT3khAHRtZ1HMq -
|
|
|
vltone
Newbie
Offline
Activity: 3
Merit: 0
|
 |
December 20, 2016, 04:17:11 AM |
|
Can someone guy me how to enumerate GPUs via OpenCL API to execute OpenCL code, and also it has to enumerate GPUs via ADL API to manage temperature/clock.
thank you
|
|
|
|
|
Puffy23
Member

Offline
Activity: 108
Merit: 11
|
 |
December 20, 2016, 04:56:46 AM |
|
thanks for your response guys. i have another question,i wanna build a rig that contain's 4 asus r9 390x dc2 8gb and 1 rx 480 4gb actually i feel fear when i think about this, i wanna spend alot of money and i am afraid of altcoins gonna be cheap in future. what shoud i do? is this predict possible? mining of etc and zcash is profitable in future? can you give me advise? extra information: i spend nothing for electricity
better build 5x rx470 4gb rig. "extra information: i spend nothing for electricity" No reason to go with 470s at all. 390/390x is definitely the way to go with zero power cost. I don't think this is necessarily true. I guess without power cost, maybe. But poster above is right. Beefier power supplies etc, make costs go way up. Likewise, try finding a 390 for less than 200, even used. Lowest I got mine for was like $185 out the door, but got lucky on ebay. $200 is more typical... Figuring that in, it costs more per hash than RX 470's... Although it may be balanced out by having to buy more motherboards, RAM, etc... But for me, where electricity still matters to some extend, the 470's massively lower w/sol would be my choice... Just for anyone wondering what the better deal *might* be in their circumstance. No. Going from 470 to 390/390x on a 6 card rig will require at most an extra 700W. That's a $100 PSU. If you don't think spending $200 ($100 PSU, $100 or so on GPU's) more to bump hash rate by 40%+ on free power then you shouldn't be building a rig to begin with. Already without the latest update promising even more hash/s on 390/390x they run close to 50% higher than 470s so with NO power cost. It's a total no brainer if you are building a rig. For one, an increase on Claymore miner's hashrate means difficulty goes up because everyone gets the increase. Second, yeah, if you are not paying for electricity, I can see the appeal of R9 390's. But 300 sol/s for 300 watts (ususally hashrate never gets that high...) vs ~210 sol/s for 100 watts sounds like a better deal to me. Well, mostly if someone were only building let's say, one 6-card rig. But I did make an error before. I guess when you consider not paying power, and also the additional cost of motherboards, cpu's, ram, etc, then the cost of a bigger PSU probably puts you under budget for the same hashrate... So I guess I didn't think about it all the way through. Don't worry, you're both wrong. With free power the only way to go is Fury. $260 for 315 sol/s out of the box on 15.12 drivers. On 16.xx you can get ~350 sol/s with an undervolt and GPU overclock, but admittedly it is less stable. Worried about power overhead? Buy a cheap server PSU dedicated to the cards. Problem solved. Edit: Even if power is a factor you can run Furys on 16.xx driver with an undervolt and underclock to get ~300 sol/s @ 150W. That very nearly matches the efficiency of the RX series but nets 50% more hash for 25% more retail cost.
|
|
|
|
|
|
br2459
|
 |
December 20, 2016, 05:33:46 AM |
|
I am currently running on average 950H/s so here's hoping Claymore's newest version will get me to 1KH/s! I have 2 RX480's 8GB, 2 R9 270x's 4GB and 1 HD7970 3GB.
|
|
|
|
fmz89
Legendary
Offline
Activity: 1765
Merit: 1002
|
 |
December 20, 2016, 06:13:02 AM |
|
thanks for your response guys. i have another question,i wanna build a rig that contain's 4 asus r9 390x dc2 8gb and 1 rx 480 4gb actually i feel fear when i think about this, i wanna spend alot of money and i am afraid of altcoins gonna be cheap in future. what shoud i do? is this predict possible? mining of etc and zcash is profitable in future? can you give me advise? extra information: i spend nothing for electricity
better build 5x rx470 4gb rig. "extra information: i spend nothing for electricity" No reason to go with 470s at all. 390/390x is definitely the way to go with zero power cost. I don't think this is necessarily true. I guess without power cost, maybe. But poster above is right. Beefier power supplies etc, make costs go way up. Likewise, try finding a 390 for less than 200, even used. Lowest I got mine for was like $185 out the door, but got lucky on ebay. $200 is more typical... Figuring that in, it costs more per hash than RX 470's... Although it may be balanced out by having to buy more motherboards, RAM, etc... But for me, where electricity still matters to some extend, the 470's massively lower w/sol would be my choice... Just for anyone wondering what the better deal *might* be in their circumstance. No. Going from 470 to 390/390x on a 6 card rig will require at most an extra 700W. That's a $100 PSU. If you don't think spending $200 ($100 PSU, $100 or so on GPU's) more to bump hash rate by 40%+ on free power then you shouldn't be building a rig to begin with. Already without the latest update promising even more hash/s on 390/390x they run close to 50% higher than 470s so with NO power cost. It's a total no brainer if you are building a rig. For one, an increase on Claymore miner's hashrate means difficulty goes up because everyone gets the increase. Second, yeah, if you are not paying for electricity, I can see the appeal of R9 390's. But 300 sol/s for 300 watts (ususally hashrate never gets that high...) vs ~210 sol/s for 100 watts sounds like a better deal to me. Well, mostly if someone were only building let's say, one 6-card rig. But I did make an error before. I guess when you consider not paying power, and also the additional cost of motherboards, cpu's, ram, etc, then the cost of a bigger PSU probably puts you under budget for the same hashrate... So I guess I didn't think about it all the way through. Don't worry, you're both wrong. With free power the only way to go is Fury. $260 for 315 sol/s out of the box on 15.12 drivers. On 16.xx you can get ~350 sol/s with an undervolt and GPU overclock, but admittedly it is less stable. Worried about power overhead? Buy a cheap server PSU dedicated to the cards. Problem solved. Edit: Even if power is a factor you can run Furys on 16.xx driver with an undervolt and underclock to get ~300 sol/s @ 150W. That very nearly matches the efficiency of the RX series but nets 50% more hash for 25% more retail cost. forget about fury, nano 270 sol at 90-95 watt
|
|
|
|
|
|
muchoman
|
 |
December 20, 2016, 06:58:52 AM |
|
I will release new version in 1-2 days. Not all cards will get speedup, but at least Hawaii and Polaris will.
Tahiti and Pitcairn are maxed out?
|
|
|
|
|
|
br2459
|
 |
December 20, 2016, 07:10:56 AM |
|
I will release new version in 1-2 days. Not all cards will get speedup, but at least Hawaii and Polaris will.
Tahiti and Pitcairn are maxed out? I would hope not since my 7970 is Tahiti and my 270x's are Pitcarin. Although I am pushing 302H/s on 2 R9 270x's. Only 200H/s on the 7970 though.
|
|
|
|
yatta
Member

Offline
Activity: 93
Merit: 10
|
 |
December 20, 2016, 07:55:16 AM |
|
Yes, that's right. My gpuz shows avg 80 - 90W
Add +40W at wall.
|
ETH 0xe3c8d2587e03ac3bdcb86794b8227c000db54d25
|
|
|
Gambler8899
Newbie
Offline
Activity: 38
Merit: 0
|
 |
December 20, 2016, 08:19:05 AM |
|
Less than 3 hours to new version 
|
|
|
|
|
|
golden0707
|
 |
December 20, 2016, 08:21:00 AM |
|
Less than 3 hours to new version  Who sad that ?
|
|
|
|
|
Gambler8899
Newbie
Offline
Activity: 38
Merit: 0
|
 |
December 20, 2016, 08:26:09 AM |
|
Less than 3 hours to new version  Who sad that ? Quote from: Claymore on December 18, 2016, 11:55:42 AM I will release new version in 1-2 days. Not all cards will get speedup, but at least Hawaii and Polaris will.
|
|
|
|
|
|