Swedish ASIC miner company kncminer.com

[soy]

Great news, it's re-enabling the cores while on eligius:
 [P]ool management ettings [D]isplay options [Q]uit
 KnC 0:                | 100.1G/91.20Gh/s | A:16070 R:4 HW:5982 WU:1364.5/m
--------------------------------------------------------------------------------

 [2000-01-01 00:19:42] Accepted 07f66382 Diff 32/31 KnC 0 pool 1
 [2000-01-01 00:19:43] KnC: core 4-128 was enabled back from disabled state
 [2000-01-01 00:19:44] Accepted 03f5e7d0 Diff 64/31 KnC 0 pool 1
 [2000-01-01 00:19:44] Accepted 00ae90b6 Diff 375/31 KnC 0 pool 1
 [2000-01-01 00:19:46] Accepted 07e82ec4 Diff 32/31 KnC 0 pool 1
 [2000-01-01 00:19:48] Accepted 0668ea61 Diff 39/31 KnC 0 pool 1
 [2000-01-01 00:19:48] Accepted 0447df3a Diff 59/31 KnC 0 pool 1
 [2000-01-01 00:19:50] Accepted 05a262fc Diff 45/31 KnC 0 pool 1
 [2000-01-01 00:19:52] Accepted 0068831d Diff 627/31 KnC 0 pool 1
 [2000-01-01 00:19:52] Accepted 045a118d Diff 58/31 KnC 0 pool 1
 [2000-01-01 00:19:55] Accepted 07efbecb Diff 32/31 KnC 0 pool 1
 [2000-01-01 00:19:55] KnC: core 4-57 was enabled back from disabled state
 [2000-01-01 00:19:59] KnC: core 4-75 was enabled back from disabled state
 [2000-01-01 00:19:59] Accepted 01ee87f8 Diff 132/31 KnC 0 pool 1
 [2000-01-01 00:20:00] KnC: core 4-139 was enabled back from disabled state
 [2000-01-01 00:20:01] Accepted 011fabea Diff 227/31 KnC 0 pool 1
 [2000-01-01 00:20:02] KnC: core 4-89 was enabled back from disabled state
 [2000-01-01 00:20:02] KnC: core 4-49 was enabled back from disabled state
 [2000-01-01 00:20:03] Accepted 059cf6ac Diff 45/31 KnC 0 pool 1
 [2000-01-01 00:20:05] KnC: core 4-5 was enabled back from disabled state
 [2000-01-01 00:20:05] KnC: core 4-64 was enabled back from disabled state
 [2000-01-01 00:20:07] KnC: core 4-77 was enabled back from disabled state
 [2000-01-01 00:20:07] Accepted 07315ea2 Diff 35/31 KnC 0 pool 1
 [2000-01-01 00:20:08] KnC: core 4-50 was enabled back from disabled state
 [2000-01-01 00:20:08] KnC: core 4-85 was enabled back from disabled state
 [2000-01-01 00:20:08] KnC: core 4-4 was enabled back from disabled state
 [2000-01-01 00:20:08] KnC: core 4-121 was enabled back from disabled state
 [2000-01-01 00:20:09] KnC: core 4-107 was enabled back from disabled state
 [2000-01-01 00:20:09] KnC: core 4-117 was enabled back from disabled state

[soy]

Great news, it's re-enabling the cores while on eligius:
 [P]ool management ettings [D]isplay options [Q]uit
 KnC 0:                | 100.1G/91.20Gh/s | A:16070 R:4 HW:5982 WU:1364.5/m
--------------------------------------------------------------------------------

 [2000-01-01 00:19:42] Accepted 07f66382 Diff 32/31 KnC 0 pool 1
 [2000-01-01 00:19:43] KnC: core 4-128 was enabled back from disabled state
 [2000-01-01 00:19:44] Accepted 03f5e7d0 Diff 64/31 KnC 0 pool 1
 [2000-01-01 00:19:44] Accepted 00ae90b6 Diff 375/31 KnC 0 pool 1
 [2000-01-01 00:19:46] Accepted 07e82ec4 Diff 32/31 KnC 0 pool 1
 [2000-01-01 00:19:48] Accepted 0668ea61 Diff 39/31 KnC 0 pool 1
 [2000-01-01 00:19:48] Accepted 0447df3a Diff 59/31 KnC 0 pool 1
 [2000-01-01 00:19:50] Accepted 05a262fc Diff 45/31 KnC 0 pool 1
 [2000-01-01 00:19:52] Accepted 0068831d Diff 627/31 KnC 0 pool 1
 [2000-01-01 00:19:52] Accepted 045a118d Diff 58/31 KnC 0 pool 1
 [2000-01-01 00:19:55] Accepted 07efbecb Diff 32/31 KnC 0 pool 1
 [2000-01-01 00:19:55] KnC: core 4-57 was enabled back from disabled state
 [2000-01-01 00:19:59] KnC: core 4-75 was enabled back from disabled state
 [2000-01-01 00:19:59] Accepted 01ee87f8 Diff 132/31 KnC 0 pool 1
 [2000-01-01 00:20:00] KnC: core 4-139 was enabled back from disabled state
 [2000-01-01 00:20:01] Accepted 011fabea Diff 227/31 KnC 0 pool 1
 [2000-01-01 00:20:02] KnC: core 4-89 was enabled back from disabled state
 [2000-01-01 00:20:02] KnC: core 4-49 was enabled back from disabled state
 [2000-01-01 00:20:03] Accepted 059cf6ac Diff 45/31 KnC 0 pool 1
 [2000-01-01 00:20:05] KnC: core 4-5 was enabled back from disabled state
 [2000-01-01 00:20:05] KnC: core 4-64 was enabled back from disabled state
 [2000-01-01 00:20:07] KnC: core 4-77 was enabled back from disabled state
 [2000-01-01 00:20:07] Accepted 07315ea2 Diff 35/31 KnC 0 pool 1
 [2000-01-01 00:20:08] KnC: core 4-50 was enabled back from disabled state
 [2000-01-01 00:20:08] KnC: core 4-85 was enabled back from disabled state
 [2000-01-01 00:20:08] KnC: core 4-4 was enabled back from disabled state
 [2000-01-01 00:20:08] KnC: core 4-121 was enabled back from disabled state
 [2000-01-01 00:20:09] KnC: core 4-107 was enabled back from disabled state
 [2000-01-01 00:20:09] KnC: core 4-117 was enabled back from disabled state

spoke too soon as the cores are disabling again

[2000-01-01 00:21:05] KnC: core 4-82 was disabled due to 10 HW errors in a row
 [2000-01-01 00:21:06] Accepted 0515e1e9 Diff 50/31 KnC 0 pool 1
 [2000-01-01 00:21:06] KnC: core 4-118 was disabled due to 10 HW errors in a row
 [2000-01-01 00:21:09] Accepted 05be9c55 Diff 44/31 KnC 0 pool 1
 [2000-01-01 00:21:09] KnC: core 4-52 was disabled due to 10 HW errors in a row
 [2000-01-01 00:21:09] KnC: core 4-105 was disabled due to 10 HW errors in a row
 [2000-01-01 00:21:11] Accepted 07cf965b Diff 32/31 KnC 0 pool 1
 [2000-01-01 00:21:12] KnC: core 4-69 was disabled due to 10 HW errors in a row
 [2000-01-01 00:21:13] Accepted 0093f6d2 Diff 442/31 KnC 0 pool 1
 [2000-01-01 00:21:13] KnC: core 4-121 was disabled due to 10 HW errors in a row
 [2000-01-01 00:21:14] Accepted 02d2db15 Diff 90/31 KnC 0 pool 1
 [2000-01-01 00:21:16] KnC: core 4-10 was enabled back from disabled state
 [2000-01-01 00:21:17] Accepted 0178e748 Diff 173/31 KnC 0 pool 1
 [2000-01-01 00:21:17] Accepted 03679585 Diff 75/31 KnC 0 pool 1
 [2000-01-01 00:21:17] KnC: core 4-16 was disabled due to 10 HW errors in a row
 [2000-01-01 00:21:19] KnC: core 4-88 was disabled due to 10 HW errors in a row
 [2000-01-01 00:21:19] Accepted 069d0bbd Diff 38/31 KnC 0 pool 1
 [2000-01-01 00:21:19] KnC: core 4-79 was disabled due to 10 HW errors in a row
 [2000-01-01 00:21:23] Accepted 05a1604d Diff 45/31 KnC 0 pool 1
 [2000-01-01 00:21:23] KnC: core 4-96 was disabled due to 10 HW errors in a row
 [2000-01-01 00:21:23] KnC: core 4-92 was disabled due to 10 HW errors in a row
 [2000-01-01 00:21:23] KnC: core 4-142 was disabled due to 10 HW errors in a row
 [2000-01-01 00:21:25] Accepted 07baca69 Diff 33/31 KnC 0 pool 1
 [2000-01-01 00:21:29] Accepted 04ee09c4 Diff 51/31 KnC 0 pool 1
 [2000-01-01 00:21:30] Accepted 0210f426 Diff 123/31 KnC 0 pool 1
 [2000-01-01 00:21:30] KnC: core 4-131 was disabled due to 10 HW errors in a row
 [2000-01-01 00:21:31] KnC: core 4-135 was disabled due to 10 HW errors in a row
 [2000-01-01 00:21:31] KnC: core 4-138 was disab

[soy]

KnC 0:                | 71.37G/231.7Kh/s | A:17372 R:4 HW:8355 WU:   0.0/m

bummer

eligius is showing 2013/10/18 14:48:45: 675 seconds: 34741.51

34.7GH/s

[soy]

KnC 0:                | 71.37G/231.7Kh/s | A:17372 R:4 HW:8355 WU:   0.0/m

bummer

eligius is showing 2013/10/18 14:48:45: 675 seconds: 34741.51

34.7GH/s

Oh well, I'm going to shut it down and inspect the board with a loupe and check out its thermal paste or tape.

[timmmers]

How long was it running for? A few minutes may not be enough to see it get hashing properly...assuming nothing wrong of course.

[Altomesi]

KnC 0:                | 71.37G/231.7Kh/s | A:17372 R:4 HW:8355 WU:   0.0/m

bummer

eligius is showing 2013/10/18 14:48:45: 675 seconds: 34741.51

34.7GH/s

Oh well, I'm going to shut it down and inspect the board with a loupe and check out its thermal paste or tape.

Which firmware? Did you update the firmware that it shipped with?

[btc_uzr]

soy may I ask you to start a new thread ?
like 'KnCMiner First hand experience' or so

I see the next pages filled up by you - image all of us had done such kind of reports in here (>5.000 pages in here I guess)

thank you very much in advance

[joeventura]

Box has arrived undamaged.  Loud sound of plastic falling about inside.

How is that possible?

Your unit and mine were on the same plane, I live one hour from you and mine is still in OHIO

[btc_uzr]

the paths of the Lord DHL are inscrutable

hope you get it soon, must feel like fire in the ass - so close but still so far.

[Henchman24]

My shipment appears to be sitting in OH with the following status:

12    Clearance event    CINCINNATI HUB, OH - USA    4:48 AM

Under "Further Details":

The Clearance process for this shipment is on-going with additional details required for clearance

and under "Next Step":

The clearance process will continue once the additional details are provided for clearance

Is this something out of the ordinary, or do all international shipments to the US go through this?

[joeventura]

My shipment appears to be sitting in OH with the following status:

12    Clearance event    CINCINNATI HUB, OH - USA    4:48 AM

Under "Further Details":

The Clearance process for this shipment is on-going with additional details required for clearance

and under "Next Step":

The clearance process will continue once the additional details are provided for clearance

Is this something out of the ordinary, or do all international shipments to the US go through this?

Yes that is normal

mine is showing the same.

Unless DHL delivers on weekends (Hahahhaa) We won't see ours until Monday or Tuesday.

Strange I remember paying for UPS not DHL

DHL has always sucked!!

[Henchman24]

Strange I remember paying for UPS not DHL

No shit!  UPS Next Day, no less.

Somehow that turned into a 5 day trip with DHL.  Fucked again.  JFC   

[soy]

KnC 0:                | 71.37G/231.7Kh/s | A:17372 R:4 HW:8355 WU:   0.0/m

bummer

eligius is showing 2013/10/18 14:48:45: 675 seconds: 34741.51

34.7GH/s

Oh well, I'm going to shut it down and inspect the board with a loupe and check out its thermal paste or tape.

About the same.  Nothing visibly wrong on the ASIC board.  Didn't check the controller board or BBB.  Soon after the restart the 12v switching supply said the ASIC and fans were using 156 watts but as the cores shut down the power dropped and presently it's just 132 watts.

 KnC 0:                | 95.96G/85.33Gh/s | A:10513 R:26 HW:4586 WU:1333.5/m

[The Avenger]

So it's now 6pm Friday in Sweden, end of business day. No news on shipping. So looks like if you units are still "in progress", the earliest you might see something now is Tuesday.

The difference between "set in stone" deadline of 15th October and Tuesday 22nd is a loss of 7BTC (and counting) per Jupiter.

I'm looking at you KNC.

[CanaryInTheMine]

My shipment appears to be sitting in OH with the following status:

12    Clearance event    CINCINNATI HUB, OH - USA    4:48 AM

Under "Further Details":

The Clearance process for this shipment is on-going with additional details required for clearance

and under "Next Step":

The clearance process will continue once the additional details are provided for clearance

Is this something out of the ordinary, or do all international shipments to the US go through this?

It appears that additional info is required by DHL from you to clear your shipment with customs.

Don't wait!! Call them ASAP and see what they need.

If you're lucky, you will receive it Monday.

If you have forms to fill out, then well... It's up to you.
This isn't a DHL/UPS/FedEx issue. It's US customs not clearing your shipment.

[soy]

KnC 0:                | 71.37G/231.7Kh/s | A:17372 R:4 HW:8355 WU:   0.0/m

bummer

eligius is showing 2013/10/18 14:48:45: 675 seconds: 34741.51

34.7GH/s

Oh well, I'm going to shut it down and inspect the board with a loupe and check out its thermal paste or tape.

Which firmware? Did you update the firmware that it shipped with?

Firmware 0.95 and no I have not upgraded.  Temp in the room is cool, 70.2°F (think that's 21.2°C) and the miner is
 HW status:

ASIC slot #1: -
ASIC slot #2: -
ASIC slot #3: -
ASIC slot #4: -
ASIC slot #5: 30.5 ℃
ASIC slot #6: -

[CanaryInTheMine]

Strange I remember paying for UPS not DHL

No shit!  UPS Next Day, no less.

Somehow that turned into a 5 day trip with DHL.  Fucked again.  JFC   

Are you saying it's been sitting in DHL for 3-5 days? If so, call and ask.  DHL doesn't just sit on packages for no reason... All delays with international shipments are due to customs/security checks that are outside of shippers control.  But there are .1% occasional logistic problems... Don't wait and call them!

[Henchman24]

Strange I remember paying for UPS not DHL

No shit!  UPS Next Day, no less.

Somehow that turned into a 5 day trip with DHL.  Fucked again.  JFC   

Are you saying it's been sitting in DHL for 3-5 days?

No, I'm saying it looks like it will be 5 days or more by the time it's delivered.

[Biffa]

Cooler Master stand true to their name, their cooling products are awesome, their cabinets are also great. But their PSU's are crap (90%). I've rather bet on Seasonic/Antec/Corsair. They are the most trusted names in psus, at least when it comes to powering up computers. There is a tiered listing of psus somewhere in bookmarks, if I find it, I'll post it.

The V1000 is made by Seasonic its the new KM3 platform

Check out the johnnyguru review. http://www.jonnyguru.com/modules.php?name=NDReviews&op=Story4&reid=344

Just a bad one from the batch, will RMA it tommorow.

[joeventura]

Strange I remember paying for UPS not DHL

No shit!  UPS Next Day, no less.

Somehow that turned into a 5 day trip with DHL.  Fucked again.  JFC   

Are you saying it's been sitting in DHL for 3-5 days? If so, call and ask.  DHL doesn't just sit on packages for no reason... All delays with international shipments are due to customs/security checks that are outside of shippers control.  But there are .1% occasional logistic problems... Don't wait and call them!

I already called they said they needed no other info

Damn thing sat in Belgium for almost 24 hours