Swedish ASIC miner company kncminer.com

[r3animation]

I havent gotten bertmod installed but Im running 0.96.
Just hope they get re-enabled.  Or some new FW that doesn't disable them when > 10 HW errors.
The threshold should be more than 10 IMHO.  

They are re-enabling.  That is good.  But some cores and being disabled back again after a while.

Does anyone know if the cgminer output is piped to some log somewhere?

Are you co-locating your unit or at home?

I see the core disable and re-enable all the time. Doesn't really affect hash rate at all.

No idea about the logs.

[Gyrsur]

with firmware 0.9.5 I get a difference of ~45 Gh/s between closed and open case (~480 Gh/s vs. ~525 Gh/s).

going to try firmware 0.9.6 with closed case.

[idee2013]

with firmware 0.9.5 I get a difference of ~45 Gh/s between closed and open case (~480 Gh/s vs. ~525 Gh/s).

going to try firmware 0.9.6 with closed case.

525 Gh/s closed or open case?

[Gyrsur]

with firmware 0.9.5 I get a difference of ~45 Gh/s between closed and open case (~480 Gh/s vs. ~525 Gh/s).

going to try firmware 0.9.6 with closed case.

525 Gh/s closed or open case?

525 Gh/s open case with firmware 0.9.5

EDIT: in the meantime firmware 0.9.5 did reach 516.16 Gh/s with closed case. it seems to me it takes a while until it adjust to the max. level with closed case. my impression is with open case adjustment of max. level is faster.

[sbfree]

login as: root
[email protected]'s password:
root@Saturn-4CA:~# screen -r
[screen is terminating]
root@Saturn-4CA:~# screen -r
[screen is terminating]
root@Saturn-4CA:~# screen -r
 cgminer version 3.4.0 - Started: [2013-10-19 09:37:01]
--------------------------------------------------------------------------------
 (5s):275.5G (avg):257.1Gh/s | A:430336  R:9728  HW:86739  WU:3846.6/m
 ST: 2  SS: 0  NB: 22  LW: 557863  GF: 0  RF: 0
 Connected to xxxxxxx.57 diff 256 with stratum as user xxxxxminer_knc
 Block: 000eabdfc35ef600...  Diff:268M  Started: [11:51:35]  Best share: 791K
--------------------------------------------------------------------------------
 [P]ool management [S)ettings [D]isplay options [Q]uit
 KnC 0:                | 262.1G/257.2Gh/s | A:430336 R:9728 HW:86769 WU:3848.1/m
--------------------------------------------------------------------------------

 [2013-10-19 12:01:27] Accepted 008c516f Diff 467/256 KnC 0
 [2013-10-19 12:01:28] Accepted 003decd9 Diff 1.06K/256 KnC 0
 [2013-10-19 12:01:35] Accepted 00a724f5 Diff 392/256 KnC 0
 [2013-10-19 12:01:35] Accepted 008a2ad9 Diff 474/256 KnC 0
 [2013-10-19 12:01:38] Accepted 0065ffb2 Diff 642/256 KnC 0
 [2013-10-19 12:01:44] Accepted 00ab6242 Diff 382/256 KnC 0
 [2013-10-19 12:01:58] Accepted 002f94eb Diff 1.38K/256 KnC 0
 [2013-10-19 12:02:04] Accepted 002f998c Diff 1.38K/256 KnC 0
 [2013-10-19 12:02:10] Accepted 006dbe7d Diff 597/256 KnC 0
 [2013-10-19 12:02:19] Accepted 000867e7 Diff 7.8K/256 KnC 0
 [2013-10-19 12:02:23] Accepted 007539c4 Diff 559/256 KnC 0
 [2013-10-19 12:02:23] Accepted 00027a2f Diff 26.5K/256 KnC 0
 [2013-10-19 12:02:32] Accepted 00e6463b Diff 284/256 KnC 0

so according to the numbers, this means that I have like a 20% error rate, and thats why on the pool server I show THE TRUE HASH RATE OF 210GH/s.....correct me if I am wrong, but I think this is how this reads....

Kano, any thing that can be done to correct this.....is it firmware to hardware, hardware to software.....I notice on .96 that when a block is found, the miner regains speed quicker...would like to see the 20% errors go away, then maybe the pool server will truly see 250GH/s.

[derekleong75]

I havent gotten bertmod installed but Im running 0.96.
Just hope they get re-enabled.  Or some new FW that doesn't disable them when > 10 HW errors.
The threshold should be more than 10 IMHO.  

They are re-enabling.  That is good.  But some cores and being disabled back again after a while.

Does anyone know if the cgminer output is piped to some log somewhere?

Are you co-locating your unit or at home?

I see the core disable and re-enable all the time. Doesn't really affect hash rate at all.

No idea about the logs.

I have it set up in my workplace's computer room.  So free power for now.

All I'm hoping is for it to be constant 500GH then I would be a happy man.

Not sure what else is there to tweak now except changing the min difficulty every few hours or so.  I had it at 512 earlier and it's now at 256.

[joeventura]

DHL shipped on Thursday morning from Sweden
got to me in NY this Friday afternoon

a little more than 24 hours. Im VERY impressed. I didnt expect it for another week.
BUT - the fan on the heatsink is floating around. It seemed to have detached. Im hoping it isnt broken off.

Its a Mercury and Im confused why they gave the Mercury (or at least the early builds) the HUGE cases.
Im assuming its the same chassis as the Jupiters, and they just didnt bother making a smaller one. At least 3/4 of the case isn't needed. But its a non-issue I suppose.


Also a bit disappointed that they didnt give molex/PCIE adapters with the machine like I got from BFL. I didnt expect it, but it would've been nice. This is just a nit pick of mine.

You have got to be kidding me!! My Saturn was shipped on Wednesday and it is still waiting to be cleared at DHL and the earliest I will see it is next week on the 23rd!! It is also East cost USA. Do you mind posting your tracking log?

Going to East coast of U.S.

[kano]

...
Kano, any thing that can be done to correct this.....is it firmware to hardware, hardware to software.....I notice on .96 that when a block is found, the miner regains speed quicker...would like to see the 20% errors go away, then maybe the pool server will truly see 250GH/s.

No idea how to fix hardware error rate.
I don't have a KFC to even try.

[Wesly]

...
Kano, any thing that can be done to correct this.....is it firmware to hardware, hardware to software.....I notice on .96 that when a block is found, the miner regains speed quicker...would like to see the 20% errors go away, then maybe the pool server will truly see 250GH/s.

No idea how to fix hardware error rate.
I don't have a KFC to even try.

Damn, what happen to you?  You are getting cheap on us.  And here we thought you only work for free miners 

Do you want extra crispy or extra live KFC 

[sickpig]

...
Kano, any thing that can be done to correct this.....is it firmware to hardware, hardware to software.....I notice on .96 that when a block is found, the miner regains speed quicker...would like to see the 20% errors go away, then maybe the pool server will truly see 250GH/s.

No idea how to fix hardware error rate.
I don't have a KFC to even try.

if memory serves KnC should have sent a miner to ckolivas and Luke-jr. I've asked to Luke-jr for confimation and he confirmed. didn't ask to ckolivas. anyway I supposed they have sent on to you too, is it true?  

[kano]

...
Kano, any thing that can be done to correct this.....is it firmware to hardware, hardware to software.....I notice on .96 that when a block is found, the miner regains speed quicker...would like to see the 20% errors go away, then maybe the pool server will truly see 250GH/s.

No idea how to fix hardware error rate.
I don't have a KFC to even try.

if memory serves KnC should have sent a miner to ckolivas and Luke-jr. I've asked to Luke-jr for confimation and he confirmed. didn't ask to ckolivas. anyway I supposed they have sent on to you too, is it true?  

I'm not either of them

[sickpig]

...
Kano, any thing that can be done to correct this.....is it firmware to hardware, hardware to software.....I notice on .96 that when a block is found, the miner regains speed quicker...would like to see the 20% errors go away, then maybe the pool server will truly see 250GH/s.

No idea how to fix hardware error rate.
I don't have a KFC to even try.

if memory serves KnC should have sent a miner to ckolivas and Luke-jr. I've asked to Luke-jr for confimation and he confirmed. didn't ask to ckolivas. anyway I supposed they have sent on to you too, is it true?  

I'm not either of them

so they didn't send you a miner? bad bad knc.

I suppose you can use the ckolivas', no ?

[btc_uzr]

That was a mistake not offering them the possibility to contribute from the beginning.

I mean I can understand that KnCMiner didn't want to rely on another third party -due to risks involved concerning deadline- but even not offering a chance to do so (fpga mock board, etc) before its in the wild, I can really not understand.

[kano]

...
Kano, any thing that can be done to correct this.....is it firmware to hardware, hardware to software.....I notice on .96 that when a block is found, the miner regains speed quicker...would like to see the 20% errors go away, then maybe the pool server will truly see 250GH/s.

No idea how to fix hardware error rate.
I don't have a KFC to even try.

if memory serves KnC should have sent a miner to ckolivas and Luke-jr. I've asked to Luke-jr for confimation and he confirmed. didn't ask to ckolivas. anyway I supposed they have sent on to you too, is it true?  

I'm not either of them

so they didn't send you a miner? bad bad knc.

I suppose you can use the ckolivas', no ?

He lives ~1000km away from me - so really no different to being on the other side of the planet.

[FiatKiller]

Guys, I read somewhere on one of these threads about enabling remote management and it worked for me. Getting about 50-75 more WU with 0.96 firmware and open case. Make sure you do it!  :-D

[sickpig]

...
Kano, any thing that can be done to correct this.....is it firmware to hardware, hardware to software.....I notice on .96 that when a block is found, the miner regains speed quicker...would like to see the 20% errors go away, then maybe the pool server will truly see 250GH/s.

No idea how to fix hardware error rate.
I don't have a KFC to even try.

if memory serves KnC should have sent a miner to ckolivas and Luke-jr. I've asked to Luke-jr for confimation and he confirmed. didn't ask to ckolivas. anyway I supposed they have sent on to you too, is it true?  

I'm not either of them

so they didn't send you a miner? bad bad knc.

I suppose you can use the ckolivas', no ?

He lives ~1000km away from me - so really no different to being on the other side of the planet.

Nothing than I thought you live on the same city but obviously I was wrong. Instead you live on the same continent.

[sbfree]

Guys, I read somewhere on one of these threads about enabling remote management and it worked for me. Getting about 50-75 more WU with 0.96 firmware and open case. Make sure you do it!  :-D

hell, at this point, I will try anything. My cgminer says 250GH/s with 20% hw error rate equals to about 200 GH/s at the server, WEAK!!

tried .96 and enablecore bin file....now this....will report back. thanks.

[Gyrsur]

with firmware 0.9.5 I get a difference of ~45 Gh/s between closed and open case (~480 Gh/s vs. ~525 Gh/s).

going to try firmware 0.9.6 with closed case.

525 Gh/s closed or open case?

525 Gh/s open case with firmware 0.9.5

EDIT: in the meantime firmware 0.9.5 did reach 516.16 Gh/s with closed case. it seems to me it takes a while until it adjust to the max. level with closed case. my impression is with open case adjustment of max. level is faster.

buttom line after 2 hours or so of self adjustment of the miner with closed case I have no difference of hashrate between open and closed case. both ~525 Gh/s with firmware 0.9.5. but it will take definitely longer to get the end hashrate with closed case.

[Mota]

Guys, I read somewhere on one of these threads about enabling remote management and it worked for me. Getting about 50-75 more WU with 0.96 firmware and open case. Make sure you do it!  :-D

hell, at this point, I will try anything. My cgminer says 250GH/s with 20% hw error rate equals to about 200 GH/s at the server, WEAK!!

tried .96 and enablecore bin file....now this....will report back. thanks.

Where do you read your hw error rate? AFAIK Work utility has a theoretical best with 73-69gh/1. My Jupiter has 550gh and WU 7895. I doubt you can make that number any better with an open case.

[Mota]

I don't know how ya'll are getting your miners so fast. My Jupiter was shipped on the 15th, flew over my house on the 16th then made a few stops in the us, before flying to Canada, to be driven to a warehouse to be cleared by customs (after costing another $1125), then driven back to the airport Thursday night where it was scanned on it's way out of the airport, not to be seen again.

UPS, always the optimists, told me yesterday that "today is the scheduled delivery day"
"But it's 7pm here surely it can't still be coming?"
"today is the scheduled delivery day"
"So it is still coming today?"
"Today is the scheduled delivery day"
"But it was last scanned at Mirabel last night, and no scan since, how do you know it is coming today?"
"Today is the scheduled delivery day"
I think the person just went on break with "today is the scheduled delivery day" playing every few seconds, as this went on for a bit.

Needless to say it never came. Looking up the tracking last night right up till I went to bed around 11 it said "in transit on time".
Now it just says in transit. Nothing moves in the Canadian backwaters during the weekend.

So there is my story of heartache and loss of bitcoins. Imagine a world where ups saying "today is the scheduled delivery day" could actually be believed.

Imagine a world where end of september means end of september and where your second order is expected to ship in the first week of october means it will be delivered in the first week of october instead of still being in progress....
Brave new world that would be.