|
brocktice
|
 |
August 07, 2013, 04:45:19 PM |
|
Just got mine this morning, up and running! No luck with btcdig.com, now using ozco.in. Getting the cover on and off is a bit tricky. Don't really like the design. Is there a trick? Running my 4-mod with a Corsair AX1200. Doesn't fit in the case.  |
|
|
|
Bengel
Newbie
 Offline
Activity: 24
Merit: 0
|
|
August 07, 2013, 05:45:40 PM |
|
I recieved 3x 3-module no psu units today!
PS. What plugs from the PSU go into the PDU?
|
|
|
|
|
|
candoo
|
|
August 07, 2013, 05:48:27 PM |
|
I recieved 3x 3-module no psu units today!
PS. What plugs from the PSU go into the PDU?
ATX cable, PCIE cable and the EPS12 |
Einer trage des andern Last, so werdet ihr das Gesetz Christi erfüllen.
|
|
|
ProfMac
Legendary
Offline
Activity: 1246
Merit: 1002
|
|
August 07, 2013, 05:50:31 PM |
|
Just got mine this morning, up and running! No luck with btcdig.com, now using ozco.in.
Getting the cover on and off is a bit tricky. Don't really like the design. Is there a trick?
I have used a couple of bamboo skewers to help center and position the nut during reassembly. I also think a new kitchen sponge, cut to fit and installed before removing the bolt, would work well. |
I try to be respectful and informed.
|
|
|
|
greaterninja
|
|
August 07, 2013, 06:18:12 PM |
|
ok so on the Batch#3 Power connector board: I have 2 x 8 pin -PCI-E Connectors and 1 x 8 pin CPU connector. What about the 12 pin plug that says "EXT P4" ?
Or am I good for now? What about when I pop in another 4th module? I need a 8 pin Power CPU connector, right?
|
|
|
|
|
|
candoo
|
|
August 07, 2013, 06:20:56 PM |
|
ok so on the Batch#3 Power connector board: I have 2 x 8 pin -PCI-E Connectors and 1 x 8 pin CPU connector. What about the 12 pin plug that says "EXT P4" ?
Or am I good for now? What about when I pop in another 4th module? I need a 8 pin Power CPU connector, right?
EXT P4 is the power to the fourth module. |
Einer trage des andern Last, so werdet ihr das Gesetz Christi erfüllen.
|
|
|
|
WinTame2012
|
|
August 07, 2013, 06:21:57 PM |
|
Getting the cover on and off is a bit tricky. Don't really like the design. Is there a trick?
Just rectangular thick pieces of paper or cardboard. Put them into the holes below the nuts before unscrewing bolts. |
|
|
|
|
greaterninja
|
|
August 07, 2013, 06:30:23 PM
Last edit: August 07, 2013, 07:22:56 PM by greaterninja |
|
ok so on the Batch#3 Power connector board: I have 2 x 8 pin -PCI-E Connectors and 1 x 8 pin CPU connector. What about the 12 pin plug that says "EXT P4" ?
Or am I good for now? What about when I pop in another 4th module? I need a 8 pin Power CPU connector, right?
EXT P4 is the power to the fourth module. ; Whats not plugged in is 1x 8 pin CPU Power (i assume for 4th module) and 1 x 12 ping EXT P4 Power connector (for 4th module or who knows??)For a current 3 module setup, I am assuming I am good to go, right?? ---update everything seems good to go. Now to flash the sucker then overclock it. |
|
|
|
|
yeemartin
Member
Offline
Activity: 95
Merit: 10
|
|
August 07, 2013, 08:09:44 PM |
|
doesn't it already has the latest firmware that is good to overclocking?
|
|
|
|
|
fently
Member
Offline
Activity: 66
Merit: 10
Bleh!
|
|
August 07, 2013, 08:33:16 PM |
|
3 module no psu, black, arrived in Canada via DHL today, order #46xx
Nicely packaged and clean. Hope I can recover a bit of BTC from it.
paid $86.96 on delivery
declared value: 602.16 CAD (USD exchange of 1.0382)
|
|
|
|
|
|
iammagicmike
|
|
August 07, 2013, 11:22:01 PM |
|
Did anyone at all received a 4 module without PSU unit yet?
I did, and I can't seem to get the damn thing to power up. I've tried two brand new PSU. AX 850 and an OCZ 1250. Both of them wont even power the fans. I don't understand why, I have my buddy helping me, we have even opened up my batch 2 to compare PSU. I can connect into the server but i can not get her to power up. Has anyone had the same problem? |
It's only after we've lost everything that we're free to do anything.
LTC: LPGSryKuT2BaEcDBg6VWHwusXj5N8ynu3M
|
|
|
|
pikeadz
|
|
August 08, 2013, 12:02:11 AM |
|
Welp, OC'd my 4 module to 375 with my OCZ ZX1250 and got 12% HWs with no increase in hash power. Temps remained the same. Back to 350 and 1.7% hw errors she goes.
|
|
|
|
|
|
greaterninja
|
|
August 08, 2013, 12:29:49 AM
Last edit: August 08, 2013, 12:43:58 AM by greaterninja |
|
I put mine at 350mhz insane setting 850w and 3 module batch #3...
it stopped hashing to slush's pool. I tried switching to btcguild pool and it stopped hashing as well.
I am using "--avalon-auto" for my options...should I add more?
ok everything seems good now. i had to restart cgminer manually..
|
|
|
|
|
ProfMac
Legendary
Offline
Activity: 1246
Merit: 1002
|
|
August 08, 2013, 12:32:04 AM |
|
I put mine at 350mhz insane setting 850w and 3 module batch #3...
it stopped hashing to slush's pool. I tried switching to btcguild pool and it stopped hashing as well.
I am using "--avalon-auto" for my options...should I add more?
My batch #2 under --avalon-auto runs between 340-350 MHz. It seems to like 345-347. It hashes just fine to eligius and btc-guild. |
I try to be respectful and informed.
|
|
|
|
iammagicmike
|
|
August 08, 2013, 12:59:52 AM |
|
Did anyone at all received a 4 module without PSU unit yet?
I did, and I can't seem to get the damn thing to power up. I've tried two brand new PSU. AX 850 and an OCZ 1250. Both of them wont even power the fans. I don't understand why, I have my buddy helping me, we have even opened up my batch 2 to compare PSU. I can connect into the server but i can not get her to power up. Has anyone had the same problem? I figured it out, i had 4xPCIe (6+2pin) cables plugged into the all 4 of the slots on the PDU. I needed to plug in 2xPCIe (6+2pin) and 2xCPU (4+4pin) into the 4 slots. Now she is purring like a sexy little kitten. |
It's only after we've lost everything that we're free to do anything.
LTC: LPGSryKuT2BaEcDBg6VWHwusXj5N8ynu3M
|
|
|
|
WinTame2012
|
|
August 08, 2013, 01:55:30 AM |
|
Did anyone at all received a 4 module without PSU unit yet?
I did, and I can't seem to get the damn thing to power up. I've tried two brand new PSU. AX 850 and an OCZ 1250. Both of them wont even power the fans. I don't understand why, I have my buddy helping me, we have even opened up my batch 2 to compare PSU. I can connect into the server but i can not get her to power up. Has anyone had the same problem? I figured it out, i had 4xPCIe (6+2pin) cables plugged into the all 4 of the slots on the PDU. I needed to plug in 2xPCIe (6+2pin) and 2xCPU (4+4pin) into the 4 slots. Now she is purring like a sexy little kitten. How you've managed to plug the keyed connectors wrong?  |
|
|
|
|
Wayne_Chang
|
|
August 08, 2013, 04:03:34 AM |
|
Did anyone at all received a 4 module without PSU unit yet?
I did, and I can't seem to get the damn thing to power up. I've tried two brand new PSU. AX 850 and an OCZ 1250. Both of them wont even power the fans. I don't understand why, I have my buddy helping me, we have even opened up my batch 2 to compare PSU. I can connect into the server but i can not get her to power up. Has anyone had the same problem? I figured it out, i had 4xPCIe (6+2pin) cables plugged into the all 4 of the slots on the PDU. I needed to plug in 2xPCIe (6+2pin) and 2xCPU (4+4pin) into the 4 slots. Now she is purring like a sexy little kitten. How you've managed to plug the keyed connectors wrong? Seems these 2 connectors are not error prove enough. I saw someone wrongly pluged in combine a PC. |
|
|
|
|
BitAddict
Legendary
Offline
Activity: 1190
Merit: 1001
|
|
August 08, 2013, 10:49:38 AM |
|
My Avalon is stuck in spanish customs.. they tell hand writing invoice is not enough :@ I opened ticket in Avalon store but they didn't answer after 24h... Anyway I can contact faster with them? I don't want to get stuck 1 week in stupid customs...  |
|
|
|
|
|
gr0bi42
|
|
August 08, 2013, 05:02:38 PM |
|
My Avalon is stuck in spanish customs.. they tell hand writing invoice is not enough :@ I opened ticket in Avalon store but they didn't answer after 24h... Anyway I can contact faster with them? I don't want to get stuck 1 week in stupid customs... From my own experience... don't expect a happy end Mas por aqui: https://asktom.cf/index.php?topic=254174.msg2705021#msg2705021 |
Donations are welcome: 1Btf3BqUegfe5iFdWsgfBf1Ew3YsAvsrLT
|
|
|
akhentek
Newbie
Offline
Activity: 45
Merit: 0
|
|
August 08, 2013, 09:32:51 PM |
|
Happy to report my 3 module order #90XX arrived. The unit is running happily at 79 gigahashes on the pool. It was slowly overclocked to 347 Mhz over the past 5 hours, both unit and temperatures have been stable. Calculations at this speed show ROI will be met. Would be cool to add an extra module. Anyone know if/when upgrade modules will be available? Happy hashing to all  Akhentek |
|
|
|
|
|
Poll
