[ANN] profit switching auto-exchanging pool - www.middlecoin.com

[Minimaxa]

Seems to be running inefficiently right now because of the coin alternating?


not responding, new block detected
not responding, new block detected
not responding, new block detected


With this amount of hashpower = accepted!

[zSprawl]

Using both the US and EU servers is working well for me. I have them set using load balancing in cgminer which seems to submit more shares to the US server, but my miners never run out of work even during coin switches (less than 30 sec downtime in the last hour and a half).

Also, I am running cgminer 3.1.1 (on windows 7), which doesn't seem to have the disconnect, crash, and non-restart issues people are reporting with newer versions of cgminer. It's stable for at least a week on either server with all my rigs.

i will say using load balance now i dont see my gpus goin idle even tho im still getting getwork failures i did complile a few differt versions of cgminer with the changes h20 gave us.

Running a few hours with this, and your recompiled cgminer, and I'm getting expected hash rates. Huzzah!

[bal3wolf]

Seems to be running inefficiently right now because of the coin alternating?


not responding, new block detected
not responding, new block detected
not responding, new block detected


With this amount of hashpower = accepted!

use one of the recompiled cgminers from me or the other guy that made them and add both eu.middlecoin.com and middlecoin.com to your cfg and use load balance that helps while you still get getwork failures gpu keeps having work and does not stop.

Using both the US and EU servers is working well for me. I have them set using load balancing in cgminer which seems to submit more shares to the US server, but my miners never run out of work even during coin switches (less than 30 sec downtime in the last hour and a half).

Also, I am running cgminer 3.1.1 (on windows 7), which doesn't seem to have the disconnect, crash, and non-restart issues people are reporting with newer versions of cgminer. It's stable for at least a week on either server with all my rigs.

i will say using load balance now i dont see my gpus goin idle even tho im still getting getwork failures i did complile a few differt versions of cgminer with the changes h20 gave us.

Running a few hours with this, and your recompiled cgminer, and I'm getting expected hash rates. Huzzah!

Same for me 3.1.1 with load balance running really good still have gf but gpu never dips down and always has work.

[2Alpha]

Could H20 remove all the addresses without any hashing power? Or at least remove the ones that haven't mined on middlecoin for a certain amount of time... It takes forever to load the main page and that's because there are so many addresses to load. More than half of the addresses on the page do not have any hashing power.

Use this if you want been working on it for a little while and everything seems to be ok minus updates are not updating for the past couple of hours as other have shown but you can go directly to your information by using the w={WalletID} in the url

http://www.bfpcoin.com

What do you mean by "updates are not updating"? My miners are currently mining at 2.4MH/s but your tool has been showing 1.4 MH/s for me ever since I tried it some 30 minutes ago. Is that what you mean? That this 1.4MH/s is some stale number from a couple of hours ago? Thanks!

Yep that's what I meant

[xIronCrossx]

Using both the US and EU servers is working well for me. I have them set using load balancing in cgminer which seems to submit more shares to the US server, but my miners never run out of work even during coin switches (less than 30 sec downtime in the last hour and a half).

Also, I am running cgminer 3.1.1 (on windows 7), which doesn't seem to have the disconnect, crash, and non-restart issues people are reporting with newer versions of cgminer. It's stable for at least a week on either server with all my rigs.

i will say using load balance now i dont see my gpus goin idle even tho im still getting getwork failures i did complile a few differt versions of cgminer with the changes h20 gave us.

Just curious, but which cgminer version do you recommend of the ones in your link(middle coin fixed ones)?

[Shaban]

So a few pages back someone was complaining about how h2o holds the coins before exchanging them... Although I agree that h2o does a decent job when it comes to exchanging, I too see a problem with this, with an example.

I check my balance/unexchanged/immature every hour or so. I checked it and my balance was .0030 (after payout of course), my unexchanged was .03195, and my immature was .01233. Now I check it, and my balance is still .0030, my unexchanged has gone down to .0254 and my immature has gone down to .0054. I understand with the immature coins you can't exchange them, but since my mature unexchanged coins didn't get auto-traded, I lost .006 btc. I understand this isn't much, but if it effects me, then I'm sure it's effected others that had a higher unexchanged balance.

[jimprofit99]

When it comes to balance, keep in mind that immature & unexchanged are just estimates in BTC as their name state.  If the market go down, your immature & unexchanged coins worth less.

[UNOE]

Using both the US and EU servers is working well for me. I have them set using load balancing in cgminer which seems to submit more shares to the US server, but my miners never run out of work even during coin switches (less than 30 sec downtime in the last hour and a half).

Also, I am running cgminer 3.1.1 (on windows 7), which doesn't seem to have the disconnect, crash, and non-restart issues people are reporting with newer versions of cgminer. It's stable for at least a week on either server with all my rigs.

i will say using load balance now i dont see my gpus goin idle even tho im still getting getwork failures i did complile a few differt versions of cgminer with the changes h20 gave us.

I was under the impression you can not do load balancing when the two loads are different currencies, with different diff.  Are you sure its not just only mining DOGE on eu now?

[Shaban]

When it comes to balance, keep in mind that immature & unexchanged are just estimates in BTC as their name state.  If the market go down, your immature & unexchanged coins worth less.

Yes I know, and that's exactly my point, if the coins had been auto-exchanged like the pool states, then I would have gotten the original amount stated, rather than the decreased amount that happened when the value of the unexchanged coins went down.

[bal3wolf]

Using both the US and EU servers is working well for me. I have them set using load balancing in cgminer which seems to submit more shares to the US server, but my miners never run out of work even during coin switches (less than 30 sec downtime in the last hour and a half).

Also, I am running cgminer 3.1.1 (on windows 7), which doesn't seem to have the disconnect, crash, and non-restart issues people are reporting with newer versions of cgminer. It's stable for at least a week on either server with all my rigs.

i will say using load balance now i dont see my gpus goin idle even tho im still getting getwork failures i did complile a few differt versions of cgminer with the changes h20 gave us.

I was under the impression you can not do load balancing when the two loads are different currencies, with different diff.  Are you sure its not just only mining DOGE on eu now?

 if you mine just on the us server and monitor you gpu usage you will see the usage drop then pick back up but when using load balance the gpu stays solid.

[Gamer67]

When it comes to balance, keep in mind that immature & unexchanged are just estimates in BTC as their name state.  If the market go down, your immature & unexchanged coins worth less.

Yes I know, and that's exactly my point, if the coins had been auto-exchanged like the pool states, then I would have gotten the original amount stated, rather than the decreased amount that happened when the value of the unexchanged coins went down.

I don't think anyone can predict a coins value in advance. If you can then by all means please do.

[zSprawl]

I was under the impression you can not do load balancing when the two loads are different currencies, with different diff.  Are you sure its not just only mining DOGE on eu now?

 if you mine just on the us server and monitor you gpu usage you will see the usage drop then pick back up but when using load balance the gpu stays solid.

I see what he is saying. It looks like we are mining DOGE by load balancing since it is just defaulting to the EU server, which has steady hashrates already. So are we really load balancing?

[ratty]

If I'm mining on the eu server which is just on doge, am I paid just on how well the doge sale went, or does it work by adding up all the shares everyone submits among both us and eu and dividing it?
If its all a big averaged thing, then I'll stick with eu since I'm not losing 10 seconds on every disconnect.

Also, where is this cgminer patch to make it retry faster? the thread is 200 pages, its not in the first post and I'm failing to find it. I just want the lines in the source code to change.

[MiMiMiner]

'They' say you should go with cgminer 3.1.1 and use the loadbalancing config. I am about to try this out.

[bal3wolf]

I was under the impression you can not do load balancing when the two loads are different currencies, with different diff.  Are you sure its not just only mining DOGE on eu now?

 if you mine just on the us server and monitor you gpu usage you will see the usage drop then pick back up but when using load balance the gpu stays solid.

I see what he is saying. It looks like we are mining DOGE by load balancing since it is just defaulting to the EU server, which has steady hashrates already. So are we really load balancing?

well us server is mining somthing else eu is doing doge so with load balance we are mining both what eu and us provides, i do seem to get more work from eu then us cause of the getwork fails and anyone wants the compiled cgminer my www is in my sig with the mining tools anything with middle in it was patched to have the tcp_keepidle  set to 5 and the tcp_keepintvl set to 4.

[ratty]

it was patched to have the tcp_keepidle  set to 5 and the tcp_keepintvl set to 4.

That is exactly what I was looking for, thanks!

[MiMiMiner]

I was under the impression you can not do load balancing when the two loads are different currencies, with different diff.  Are you sure its not just only mining DOGE on eu now?

 if you mine just on the us server and monitor you gpu usage you will see the usage drop then pick back up but when using load balance the gpu stays solid.

I see what he is saying. It looks like we are mining DOGE by load balancing since it is just defaulting to the EU server, which has steady hashrates already. So are we really load balancing?

well us server is mining somthing else eu is doing doge so with load balance we are mining both what eu and us provides, i do seem to get more work from eu then us cause of the getwork fails and anyone wants the compiled cgminer my www is in my sig with the mining tools anything with middle in it was patched to have the tcp_keepidle  set to 5 and the tcp_keepintvl set to 4.

Do you have a compiled version voor Unix as well availible?

[eric89]

I get the impression that the coins are probably exchanged well before they show up on the graph.

It would make sense otherwise everyone would know when a dump is coming

[Shaban]

When it comes to balance, keep in mind that immature & unexchanged are just estimates in BTC as their name state.  If the market go down, your immature & unexchanged coins worth less.

Yes I know, and that's exactly my point, if the coins had been auto-exchanged like the pool states, then I would have gotten the original amount stated, rather than the decreased amount that happened when the value of the unexchanged coins went down.

I don't think anyone can predict a coins value in advance. If you can then by all means please do.

Lol, I wish I could predict the future price of a coin. But I'm not asking about future prices, I'm asking about the current estimate. If the current estimate says 1BTC then I should get 1BTC if I trade it right then and there. But if it says current estimate is 1BTC and I don't trade it then, then the value can go up or down, and in this case it went down since it wasn't auto-traded when it was the original estimate. I hope I'm making sense.

[bal3wolf]

I was under the impression you can not do load balancing when the two loads are different currencies, with different diff.  Are you sure its not just only mining DOGE on eu now?

 if you mine just on the us server and monitor you gpu usage you will see the usage drop then pick back up but when using load balance the gpu stays solid.

I see what he is saying. It looks like we are mining DOGE by load balancing since it is just defaulting to the EU server, which has steady hashrates already. So are we really load balancing?

well us server is mining somthing else eu is doing doge so with load balance we are mining both what eu and us provides, i do seem to get more work from eu then us cause of the getwork fails and anyone wants the compiled cgminer my www is in my sig with the mining tools anything with middle in it was patched to have the tcp_keepidle  set to 5 and the tcp_keepintvl set to 4.

Do you have a compiled version voor Unix as well availible?

no but if you link me to the source but sounds like your using linux you should have tools to compile that already installed.