[ANN] profit switching auto-exchanging pool - www.middlecoin.com

[glub0x]

The port is 3333 not 333

yep my mistake i was on 3333 not 333 of course.

[Doom4535]

I also highly recommend Kalroth's version of cgminer! The xIntensity feature allowed me use 2 threads with my 7950, getting it to hash on par with my 7970!

http://k-dev.net/cgminer/

You're getting over 700KH/s from a 7950?  

If this can be confirmed that'll be a mini-game changer for mining.

I'm getting 700 now from my sapphire 4L 7950s.   

What temperature are your cards running at and what is the ambient temp?  I'm thinking if it's not to bad, I should make the switch...

[gtraah]

Ok I have been playing around in power options > Advanced options,

PCI Express | Link State Power Management:

and I switched this to MAXIMUM and then I TRIED moderate i think:

And I think this is the reason I have been having issues, after around 30 min my miner goes cold and basically off?

I now changed it to OFF and now it seems all good. I guess I should not have touched this? Any comments, expereinces with this?

[gtraah]

Hello, i'm kind of new to this middlecoin thing.
Now i have a problem, i have sevrals rigs connected to stratum+tcp://middlecoin.com:3333 with user as 1FMjeNh46HGJJC7oKMV4RgEMBpv3GAX97k and it worked fine.
But it's been2 day the graph of middle coin is not shoing anything and i didn't get payed.
http://www.middlecoin.com/reports/1FMjeNh46HGJJC7oKMV4RgEMBpv3GAX97k.html

But my rigs are working fine.
So what's the problem here?

try hashcows, this place is getting full,

[bowen151]

I guess I should not have touched this?

Yes. Do not touch this.

If your rig smelled of burning plastic its most likely not safe, triple check your power connections.

Next time you may not be so lucky.

[Capttech08]

Glad to see payouts are looking good again today! After mining to a down server for 1/2 the day yesterday. I use GUIminer for my rigs. And yes, I know CGminer is better yadayadayda. Anyone know if there is a way to set up a fall over server in GUIminer? I get a much better ping to the useast server, but would like to have it set to fall over to middlecoin.com if useast is down. Thanks!

[coins101]

Some problems with the amsterdam server today?

Edit: Pool not responding, switching to eu for now.

failover from amsterdam - can we get it back, it pings better from my location.

rejects doubled since failover.

[glub0x]

Hello, i'm kind of new to this middlecoin thing.
Now i have a problem, i have sevrals rigs connected to stratum+tcp://middlecoin.com:3333 with user as 1FMjeNh46HGJJC7oKMV4RgEMBpv3GAX97k and it worked fine.
But it's been2 day the graph of middle coin is not shoing anything and i didn't get payed.
http://www.middlecoin.com/reports/1FMjeNh46HGJJC7oKMV4RgEMBpv3GAX97k.html

But my rigs are working fine.
So what's the problem here?

So i'm the only one with that issue?

[gsrcrxsi]

I also highly recommend Kalroth's version of cgminer! The xIntensity feature allowed me use 2 threads with my 7950, getting it to hash on par with my 7970!

http://k-dev.net/cgminer/

You're getting over 700KH/s from a 7950?  

If this can be confirmed that'll be a mini-game changer for mining.

I'm getting 700 now from my sapphire 4L 7950s.   

What temperature are your cards running at and what is the ambient temp?  I'm thinking if it's not to bad, I should make the switch...

i run my XFX 7950 DD @ 1120/1480, 1.13v, -I20, TC 21900. with a failed fan, max temps ~75C. i have an AC XtremeIII at the ready for when/if the second fan fails on it.

gets me 665kh/s

i'll probably move over to sgminer and see if i can squeeze more out of it.

[zSprawl]

I also highly recommend Kalroth's version of cgminer! The xIntensity feature allowed me use 2 threads with my 7950, getting it to hash on par with my 7970!

http://k-dev.net/cgminer/

You're getting over 700KH/s from a 7950?  

Been running all night at 669KH/s, so close!

I'm using 4 as XIntensity (not the normal -I) and two threads with -g

[brightfist]

Hello, i'm kind of new to this middlecoin thing.
Now i have a problem, i have sevrals rigs connected to stratum+tcp://middlecoin.com:3333 with user as 1FMjeNh46HGJJC7oKMV4RgEMBpv3GAX97k and it worked fine.
But it's been2 day the graph of middle coin is not shoing anything and i didn't get payed.
http://www.middlecoin.com/reports/1FMjeNh46HGJJC7oKMV4RgEMBpv3GAX97k.html

But my rigs are working fine.
So what's the problem here?

So i'm the only one with that issue?

*shrug* seems that way!  I haven't seen a response from h20 in here for a while, you may want to hit him up on twitter w/your address to maybe get some traction.

Are you load balancing with another pool?  Your stats are super spiky!

[Kalroth]

Been running all night at 669KH/s, so close!

I'm using 4 as XIntensity (not the normal -I) and two threads with -g

Since the 7950¹ got 1792 shaders, X:4 should equal 7168 threads and X:5 should equal 8960 threads.
Intensity 13 equals 8192 threads, so neither X:4 and X:5 hits it exactly.

You can use --rawintensity for even finer control, but it's hard to guess what would work though.
I'd start with 7168 and work my way up, maybe increase by 64 every time.

¹ 7950 specs: http://www.techpowerup.com/gpudb/307/radeon-hd-7950.html

[zSprawl]

Hello, i'm kind of new to this middlecoin thing.
Now i have a problem, i have sevrals rigs connected to stratum+tcp://middlecoin.com:3333 with user as 1FMjeNh46HGJJC7oKMV4RgEMBpv3GAX97k and it worked fine.
But it's been2 day the graph of middle coin is not shoing anything and i didn't get payed.
http://www.middlecoin.com/reports/1FMjeNh46HGJJC7oKMV4RgEMBpv3GAX97k.html

But my rigs are working fine.
So what's the problem here?

So i'm the only one with that issue?

*shrug* seems that way!  I haven't seen a response from h20 in here for a while, you may want to hit him up on twitter w/your address to maybe get some traction.

Are you load balancing with another pool?  Your stats are super spiky!

Check your settings. That spikiness makes it seem like your hardware or config ain't working right...

[zSprawl]

Been running all night at 669KH/s, so close!

I'm using 4 as XIntensity (not the normal -I) and two threads with -g

Since the 7950¹ got 1792 shaders, X:4 should equal 7168 threads and X:5 should equal 8960 threads.
Intensity 13 equals 8192 threads, so neither X:4 and X:5 hits it exactly.

You can use --rawintensity for even finer control, but it's hard to guess what would work though.
I'd start with 7168 and work my way up, maybe increase by 64 every time.

¹ 7950 specs: http://www.techpowerup.com/gpudb/307/radeon-hd-7950.html

Thanks dude. I'll have to play this weekend.

[ak111in]

Hi,

I would like to introduce email alerts for middlecoin users. Now get email alert if your accepted MH/s is below your specified value. In order to get email alert please register at www.watcron.com/middlecoin.

How to register
1. Go to www.watcron.com/middlecoin
2. Select Email Alert.
3. Select Register.
4. Send a registration fees of .001BTC to 1NkNma4LNB3MwPGpDvk49mGEMRgmNyqvSA for registering email alert for each address, this fees amount is valid till 5th Feb 2014, after which fees will be .002BTC per address.The accepted Mh/s will be checked every 5min and email will be sent if it is less than Min Accepted MH/s.
5. Enter your address, transaction details, min accepted mh/s, email and pin. Pin will be used to modify your information later. Please do not use a pin useb by you on any other website.
6. Submit the info, this information will the be then verified and your email alerts activated.
7. Use the Inquire tab to check if your information has been verified yet.
8. Incorrect/incomplete details will not be verified.
9. All registrations are valid for one year.

https://asktom.cf/index.php?topic=439797.msg4832890#msg4832890

Regards

Email alerts for middlecoin, in case someone missed earlier.

[glub0x]

Hello, i'm kind of new to this middlecoin thing.
Now i have a problem, i have sevrals rigs connected to stratum+tcp://middlecoin.com:3333 with user as 1FMjeNh46HGJJC7oKMV4RgEMBpv3GAX97k and it worked fine.
But it's been2 day the graph of middle coin is not shoing anything and i didn't get payed.
http://www.middlecoin.com/reports/1FMjeNh46HGJJC7oKMV4RgEMBpv3GAX97k.html

But my rigs are working fine.
So what's the problem here?

So i'm the only one with that issue?

*shrug* seems that way!  I haven't seen a response from h20 in here for a while, you may want to hit him up on twitter w/your address to maybe get some traction.

Are you load balancing with another pool?  Your stats are super spiky!

Check your settings. That spikiness makes it seem like your hardware or config ain't working right...

thanks the thing is my internet connection is crapy so that might be the explanation.
how can i check that? on other pool i never felt like it was SO crapy.
when i compare to this miner for exemple i understand what you mean!
http://www.middlecoin.com/reports/1BrKEQESH3ZcyuouYqKK4NrEPaZbP9v61F.html

[FrankieSaysRelax]

Hi,

I would like to introduce email alerts for middlecoin users. Now get email alert if your accepted MH/s is below your specified value. In order to get email alert please register at www.watcron.com/middlecoin.

How to register
1. Go to www.watcron.com/middlecoin
2. Select Email Alert.
3. Select Register.
4. Send a registration fees of .001BTC to 1NkNma4LNB3MwPGpDvk49mGEMRgmNyqvSA for registering email alert for each address, this fees amount is valid till 5th Feb 2014, after which fees will be .002BTC per address.The accepted Mh/s will be checked every 5min and email will be sent if it is less than Min Accepted MH/s.
5. Enter your address, transaction details, min accepted mh/s, email and pin. Pin will be used to modify your information later. Please do not use a pin useb by you on any other website.
6. Submit the info, this information will the be then verified and your email alerts activated.
7. Use the Inquire tab to check if your information has been verified yet.
8. Incorrect/incomplete details will not be verified.
9. All registrations are valid for one year.

https://asktom.cf/index.php?topic=439797.msg4832890#msg4832890

Regards

Email alerts for middlecoin, in case someone missed earlier.

Thanks. This is definitely useful. By TXN, does he mean input the transaction ID for the payment?

[ak111in]

Hi,

I would like to introduce email alerts for middlecoin users. Now get email alert if your accepted MH/s is below your specified value. In order to get email alert please register at www.watcron.com/middlecoin.

How to register
1. Go to www.watcron.com/middlecoin
2. Select Email Alert.
3. Select Register.
4. Send a registration fees of .001BTC to 1NkNma4LNB3MwPGpDvk49mGEMRgmNyqvSA for registering email alert for each address, this fees amount is valid till 5th Feb 2014, after which fees will be .002BTC per address.The accepted Mh/s will be checked every 5min and email will be sent if it is less than Min Accepted MH/s.
5. Enter your address, transaction details, min accepted mh/s, email and pin. Pin will be used to modify your information later. Please do not use a pin useb by you on any other website.
6. Submit the info, this information will the be then verified and your email alerts activated.
7. Use the Inquire tab to check if your information has been verified yet.
8. Incorrect/incomplete details will not be verified.
9. All registrations are valid for one year.

https://asktom.cf/index.php?topic=439797.msg4832890#msg4832890

Regards

Email alerts for middlecoin, in case someone missed earlier.

Thanks. This is definitely useful. By TXN, does he mean input the transaction ID for the payment?

Yes the transaction ID of the transaction used to send the fees.

[ckoeber]

I also highly recommend Kalroth's version of cgminer! The xIntensity feature allowed me use 2 threads with my 7950, getting it to hash on par with my 7970!

http://k-dev.net/cgminer/

You're getting over 700KH/s from a 7950?  

Been running all night at 669KH/s, so close!

I'm using 4 as XIntensity (not the normal -I) and two threads with -g

Nice, the 7950's are cheaper than many of the other options.

Does anyone know if the 7950's use more/less power than the R9 280's?

The R9 280's were kings in terms of price/hashrate/power usage but I am wondering if the 7950's with sgminer can beat them...

Thanks in advance.

[MagicOnline]

Hmmm the amsterdam server and the useast server have serious issues.

A lot of disconnects on Amsterdam and a lot of rejects and stales on useast.