[ANN] profit switching auto-exchanging pool - www.middlecoin.com

[The Fat Miner]

I have a 280X doing 1.15 right now. That's just not mathematically possible over the long run. Luck.

What server are you on ? I've just switched up my settings and in still only getting 1.5 shares per min between two R9 290s

Vanilla middlecoin ATM, but I get high rejects (still the payout is better than the other ones with lower rejects). My rigs don't like useast at all today, but that was my main server. Eu and amsterdam offer good WU and low rejects but also lower payout still.

1.5/m with 2 R9 290 is what you'd expect for a hashrate of 850KH/s per card (WU is about 0.9 x 850 = 767 and U is 767 WU / 1024 share diff = 0.75 per card so 2 cards = 1.5).

850 is what I get with I18, core at default and RAM at 1350.

Is that with powertune applied ?

Yes, powertune 20.

Ok thanks ill give it a try with just memory overclock

Anyone else get accepted into poolwarz??

Curious to see if anyone's tried it yet...

I applied a week or so ago and haven't had anything yet.

[rallasnackbar]

damn wafflepool is def growing quickly

Ofc it is... you dont get screwed with a 3,4% fee.

[iarsenaux]

Just a tip guys. Use sgminer 4.0.0 instead of cgminer. Then use optimized .bin files not the optimized .cl files. Optimized .bin + sgminer 4.0.0 will give you  20kh/s to 30kh/s more. For those miners who uses cgwatcher, you can download version 1.3.5.2, rename the .exe file sgminer to cgminer so that cgwatcher will recognize it. Remove argument "-scrypt" since sgminer was designed for scrypt mining.

[SheepOnDrugs]

Just a tip guys. Use sgminer 4.0.0 instead of cgminer. Then use optimized .bin files not the optimized .cl files. Optimized .bin + sgminer 4.0.0 will give you  20kh/s to 30kh/s more. For those miners who uses cgwatcher, you can download version 1.3.5.2, rename the .exe file sgminer to cgminer so that cgwatcher will recognize it. Remove argument "-scrypt" since sgminer was designed for scrypt mining.

Does the WU also increase and can I still use my GPU undervolted?

[KS]

damn wafflepool is def growing quickly

Ofc it is... you dont get screwed with a 3,4% fee.

no but you get screwed with overall lower earnings. same difference.

[The Fat Miner]

Just a tip guys. Use sgminer 4.0.0 instead of cgminer. Then use optimized .bin files not the optimized .cl files. Optimized .bin + sgminer 4.0.0 will give you  20kh/s to 30kh/s more. For those miners who uses cgwatcher, you can download version 1.3.5.2, rename the .exe file sgminer to cgminer so that cgwatcher will recognize it. Remove argument "-scrypt" since sgminer was designed for scrypt mining.

What's optimized .bin files ? I'm already using SGMiner but I don't get that part ?

[Kheg]

Just a tip guys. Use sgminer 4.0.0 instead of cgminer. Then use optimized .bin files not the optimized .cl files. Optimized .bin + sgminer 4.0.0 will give you  20kh/s to 30kh/s more. For those miners who uses cgwatcher, you can download version 1.3.5.2, rename the .exe file sgminer to cgminer so that cgwatcher will recognize it. Remove argument "-scrypt" since sgminer was designed for scrypt mining.

Or you could just use cgminer with the optimized bin files and get the same results WITHOUT the bugs that sgminer has.   

[interupted]

Heres the link for the optimized bin files...   take out your bin file in cgminer file and replace it with these as appropriate.

http://www.reddit.com/r/litecoinmining/comments/1va8g2/ann_sgminer_400_release/


Also I have an account with pool warz that I received yesterday but I just glanced at it and it seems like you have to manually switch between the coins? Also it doesnt look like it pays in btc, but rather you get a bunch of different coins that you have to then deal with yourself..  sounds like too much work Ill stick with MC and let h20 do the work for me thanks.

[iarsenaux]

Just a tip guys. Use sgminer 4.0.0 instead of cgminer. Then use optimized .bin files not the optimized .cl files. Optimized .bin + sgminer 4.0.0 will give you  20kh/s to 30kh/s more. For those miners who uses cgwatcher, you can download version 1.3.5.2, rename the .exe file sgminer to cgminer so that cgwatcher will recognize it. Remove argument "-scrypt" since sgminer was designed for scrypt mining.

What's optimized .bin files ? I'm already using SGMiner but I don't get that part ?

There are some .bin files created by pro miners that i saw on a post in reddit. Just pick the file that match the thread concurrency that you are using. Extract it on your sgminer folder. Make sure to put "-g 2 --lookup-gap 2 --thread-concurrency (value) -w 256" in your arguments so that sgminer will use the .bin files that you extracted. You can still add your own config like engine,memclock,vddc etc. Also dont forget to check if your miner's .bin files ends with "l4.bin" or "l8.bin" you need to rename the extracted .bin files according to what your miner uses.

[iarsenaux]

Just a tip guys. Use sgminer 4.0.0 instead of cgminer. Then use optimized .bin files not the optimized .cl files. Optimized .bin + sgminer 4.0.0 will give you  20kh/s to 30kh/s more. For those miners who uses cgwatcher, you can download version 1.3.5.2, rename the .exe file sgminer to cgminer so that cgwatcher will recognize it. Remove argument "-scrypt" since sgminer was designed for scrypt mining.

Or you could just use cgminer with the optimized bin files and get the same results WITHOUT the bugs that sgminer has.   

I tried that but i get more hashes with sgminer. The only bug that i see on sgminer is it doesnt show the accepted shares and it shows percentage rejection rate. I just disregard those info and focus on cgwatcher to check my miner stats.

[Kheg]

Just a tip guys. Use sgminer 4.0.0 instead of cgminer. Then use optimized .bin files not the optimized .cl files. Optimized .bin + sgminer 4.0.0 will give you  20kh/s to 30kh/s more. For those miners who uses cgwatcher, you can download version 1.3.5.2, rename the .exe file sgminer to cgminer so that cgwatcher will recognize it. Remove argument "-scrypt" since sgminer was designed for scrypt mining.

Or you could just use cgminer with the optimized bin files and get the same results WITHOUT the bugs that sgminer has.   

I tried that but i get more hashes with sgminer. The only bug that i see on sgminer is it doesnt show the accepted shares and it shows percentage rejection rate. I just disregard those info and focus on cgwatcher to check my miner stats.

There's tons of bugs with sgminer.  GUI input locks up if you try to switch pools, various settings don't work when trying to adjust them while the miner is running, etc.  The miner itself is okay though I guess, but I didn't find it any faster than cgminer 3.7.2 either.

[zSprawl]

damn wafflepool is def growing quickly

Ofc it is... you dont get screwed with a 3,4% fee.

No fee, just less payout, lol.

[zSprawl]

Just a tip guys. Use sgminer 4.0.0 instead of cgminer. Then use optimized .bin files not the optimized .cl files. Optimized .bin + sgminer 4.0.0 will give you  20kh/s to 30kh/s more. For those miners who uses cgwatcher, you can download version 1.3.5.2, rename the .exe file sgminer to cgminer so that cgwatcher will recognize it. Remove argument "-scrypt" since sgminer was designed for scrypt mining.

The bins helped with my 7950, but did nothing for my 7970.

[The Fat Miner]

There are some .bin files created by pro miners that i saw on a post in reddit. Just pick the file that match the thread concurrency that you are using. Extract it on your sgminer folder. Make sure to put "-g 2 --lookup-gap 2 --thread-concurrency (value) -w 256" in your arguments so that sgminer will use the .bin files that you extracted. You can still add your own config like engine,memclock,vddc etc. Also dont forget to check if your miner's .bin files ends with "l4.bin" or "l8.bin" you need to rename the extracted .bin files according to what your miner uses.

So its only good for rigs that aren't -w 512 I have R9 290,s

[FrankieSaysRelax]

Looks like useast is down again. On middlecoin.com:3333 for now.

[dgross0818]

Looks like useast is down again. On middlecoin.com:3333 for now.

Yup, seeing the same thing here...

[elpsycongro]

Looks like useast is down again. On middlecoin.com:3333 for now.

Yup, seeing the same thing here...

useast is back up  , my rig just went back to it

[RickJamesBTC]

damn wafflepool is def growing quickly

Ofc it is... you dont get screwed with a 3,4% fee.

Hey, we get it, you use waffle pool. Stop spamming it here.

[fyff]

I'm on amsterdam, with eu failover  

these are amazon servers. tut, tut amazon.

maybe he needs to buy amazon prime to get a better service.

Haha I don't think amazon has servers in Amsterdam do they?

So basically we eu folks are subsidizing people mining on us servers kinda pissed right now...

And if it was the reverse, you would be happy....

don't like this, go mine on MegaMultiPool, or somewhere else 

I am doing the same work as you so why should I get paid less. Actually No, but the fact that you are shows what kind of person you are.

H20 should have been more upfront on this issue. 

[FrankieSaysRelax]

Looks like useast is down again. On middlecoin.com:3333 for now.

Yup, seeing the same thing here...

useast is back up  , my rig just went back to it

Thanks.