bx8389
Member
 Offline
Activity: 80
Merit: 10
|
 |
February 12, 2014, 10:12:43 AM
Last edit: February 12, 2014, 04:53:15 PM by bx8389 |
|
OK back... Well it is not that much problem only of power but internet working at that time on cell phone... It is hard to mine without that... ISP couldn't even give me a estimate at the moment when I will get internet back. So mobile network is overloaded...
Anyway I hope all this get fixed soon...
About the fix I got some PMs. It is replacing 4 capacitors and reprogramming VRM...
Hello Lucko Have any news about for us ? Regards |
|
|
|
|
|
Lucko (OP)
|
|
February 12, 2014, 05:51:45 PM |
|
OK back... Well it is not that much problem only of power but internet working at that time on cell phone... It is hard to mine without that... ISP couldn't even give me a estimate at the moment when I will get internet back. So mobile network is overloaded...
Anyway I hope all this get fixed soon...
About the fix I got some PMs. It is replacing 4 capacitors and reprogramming VRM...
Hello Lucko Have any news about for us ? Regards I did it one and it works without a problem... I was planing to modify more yesterday or today. The problem is that I can't get from home to my workshop https://www.dropbox.com/s/0m4deez46ecjqad/2014-02-12%2016.18.55.jpgwater in the distance is not a lake... All the snow and ice that fall over last days malted and there was also a lot of rain... Floods... I live at this location now for 3 years and we never had them till now... But we had 2 in last 2 mouths... We have 2 roads. One closed by all the trees the were broken by ice ran and one that was open officially 3 days ago(it was posible to drive on it 4 days before that but sometime you had to wait for firefighters to stop removing trees and clear the road) just to be closed back 2 days ago by water... I'm starting to fell like I'm in 3th world country... 60 hours without electricity and still not stable road close all the time unstable signal on mobile internet only on mobile... |
|
|
|
|
bx8389
Member
Offline
Activity: 80
Merit: 10
|
|
February 12, 2014, 11:15:22 PM |
|
OK back... Well it is not that much problem only of power but internet working at that time on cell phone... It is hard to mine without that... ISP couldn't even give me a estimate at the moment when I will get internet back. So mobile network is overloaded...
Anyway I hope all this get fixed soon...
About the fix I got some PMs. It is replacing 4 capacitors and reprogramming VRM...
Hello Lucko Have any news about for us ? Regards I did it one and it works without a problem... I was planing to modify more yesterday or today. The problem is that I can't get from home to my workshop https://www.dropbox.com/s/0m4deez46ecjqad/2014-02-12%2016.18.55.jpgwater in the distance is not a lake... All the snow and ice that fall over last days malted and there was also a lot of rain... Floods... I live at this location now for 3 years and we never had them till now... But we had 2 in last 2 mouths... We have 2 roads. One closed by all the trees the were broken by ice ran and one that was open officially 3 days ago(it was posible to drive on it 4 days before that but sometime you had to wait for firefighters to stop removing trees and clear the road) just to be closed back 2 days ago by water... I'm starting to fell like I'm in 3th world country... 60 hours without electricity and still not stable road close all the time unstable signal on mobile internet only on mobile... Sorry I don't have any intention to put any kind of pressure at this moment, after all my chilli are running. Was only curiosity and some concern if something bad happened to you due 5 days without news |
|
|
|
|
|
Min€r
|
|
February 19, 2014, 09:36:47 PM |
|
Hi,
where can I find the firmwares & flash-tool - any idea? I look around everywhere... 3 boards make some problems (SICK) and I want to test around if another firmware can fix it.
Thanks!
- Hope everything is OK at you Lucko... was it snowing strong again?
|
|
|
|
ronin4bits
Newbie
Offline
Activity: 59
Merit: 0
|
|
February 22, 2014, 05:21:42 AM |
|
Hi,
where can I find the firmwares & flash-tool - any idea? I look around everywhere... 3 boards make some problems (SICK) and I want to test around if another firmware can fix it.
Thanks!
- Hope everything is OK at you Lucko... was it snowing strong again?
MrTeal maintains this stuff on the Chili thread: https://asktom.cf/index.php?topic=304250.msg3257013#msg3257013I have 2 of Lucko's boards. One of them runs better with the 1.1v limiting fw, while the other works best with the "standard" fw. |
|
|
|
|
|
Min€r
|
|
February 23, 2014, 05:03:02 PM |
|
Hi,
where can I find the firmwares & flash-tool - any idea? I look around everywhere... 3 boards make some problems (SICK) and I want to test around if another firmware can fix it.
Thanks!
- Hope everything is OK at you Lucko... was it snowing strong again?
MrTeal maintains this stuff on the Chili thread: https://asktom.cf/index.php?topic=304250.msg3257013#msg3257013I have 2 of Lucko's boards. One of them runs better with the 1.1v limiting fw, while the other works best with the "standard" fw. Thanks I found it later - it`s located in the 2nd thread of the Mr. Teal Chillie post. Lucko any updates about the last missing 6 boards of my order? |
|
|
|
|
Lucko (OP)
|
|
February 24, 2014, 10:56:08 AM |
|
Hi,
where can I find the firmwares & flash-tool - any idea? I look around everywhere... 3 boards make some problems (SICK) and I want to test around if another firmware can fix it.
Thanks!
- Hope everything is OK at you Lucko... was it snowing strong again?
MrTeal maintains this stuff on the Chili thread: https://asktom.cf/index.php?topic=304250.msg3257013#msg3257013I have 2 of Lucko's boards. One of them runs better with the 1.1v limiting fw, while the other works best with the "standard" fw. Thanks I found it later - it`s located in the 2nd thread of the Mr. Teal Chillie post. Lucko any updates about the last missing 6 boards of my order? I tested if my car can get over one of the lakes and I got stuck there... And got 500€ mechanic bill. I'm not ready to risk it again... All the wood that has broken off is stuck in rivers and all melted snow and rain combines into making a nice lake... I will see if TNT will be able to get hire today. I have it ready but just not been able to send it... |
|
|
|
|
|
Min€r
|
|
February 24, 2014, 01:59:13 PM |
|
Hi,
where can I find the firmwares & flash-tool - any idea? I look around everywhere... 3 boards make some problems (SICK) and I want to test around if another firmware can fix it.
Thanks!
- Hope everything is OK at you Lucko... was it snowing strong again?
MrTeal maintains this stuff on the Chili thread: https://asktom.cf/index.php?topic=304250.msg3257013#msg3257013I have 2 of Lucko's boards. One of them runs better with the 1.1v limiting fw, while the other works best with the "standard" fw. Thanks I found it later - it`s located in the 2nd thread of the Mr. Teal Chillie post. Lucko any updates about the last missing 6 boards of my order? I tested if my car can get over one of the lakes and I got stuck there... And got 500€ mechanic bill. I'm not ready to risk it again... All the wood that has broken off is stuck in rivers and all melted snow and rain combines into making a nice lake... I will see if TNT will be able to get hire today. I have it ready but just not been able to send it... OMG - didn`t know that it´s still so problematic down there.... didn`t want to give you some pressure. |
|
|
|
|
Min€r
|
|
March 03, 2014, 05:50:03 AM |
|
I have one board what stoped working - in Windows it`s just named "unknown device" & not loading the correct drivers (so I can`t flash it too). I too asked Mr. Teal: https://asktom.cf/index.php?topic=304250.msg5476664#msg5476664 So if that f****** chip  is dead - woukd it possible to replace or repair this one? ... thanks for a quick update & hope everything get better in Slovenia. |
|
|
|
|
|
|
Min€r
|
|
March 04, 2014, 10:57:23 AM |
|
Thanks Lucko - no chance to get it back. Too the FT-Prog will not detect it... seems the chip is somehow gone. Do you think this is repairable by soldering a new chip (and what is such piece costing)? I am a complete noob on the hardware-side.... |
|
|
|
|
Lucko (OP)
|
|
March 04, 2014, 08:00:32 PM |
|
Thanks Lucko - no chance to get it back. Too the FT-Prog will not detect it... seems the chip is somehow gone. Do you think this is repairable by soldering a new chip (and what is such piece costing)? I am a complete noob on the hardware-side.... Talking from memory but I think it is about 10$ or something like that... And you need hot air and steady hand to replace it... |
|
|
|
|
|
one4many
|
|
March 04, 2014, 08:10:17 PM |
|
Lucko,
any updates on the production board side?
one4many
|
|
|
|
|
|
Lucko (OP)
|
|
March 05, 2014, 08:34:36 AM |
|
PnP has power again but also a long que. Did ask them when thy can fill me in and the answer was not before Friday. But that doesn't mean that this will happen on Friday. It means that it will not happen till then for sure... They will look for first available opening...
|
|
|
|
|
|
Lucko (OP)
|
|
March 17, 2014, 10:23:43 AM |
|
Got the message that they started production today.
|
|
|
|
|
|
capa
|
|
March 24, 2014, 07:02:08 AM |
|
surely the chips that havent been mounted are dead by now?
|
|
|
|
|
|
asjfdlksfd
|
|
March 27, 2014, 11:44:24 AM |
|
For german user, I will sell Chilly's from Lucko next time at ebay.de. They have installed a fixed firmware which pre-heat the VRM's slowly so the heat up problem is very seldom now only if my internet connection drops more than a few minutes. No hairdryer heat up is needed for them. So they run stable after flashing the work around firmware. Check ebay by using search word Chilly :-) Lucko, I hope it's ok for you. If not delete this post simply  Cheers... |
|
|
|
|
|
|
|
Lucko (OP)
|
|
March 28, 2014, 08:54:08 AM |
|
I'm OK with that...
Now I have boards made but there is again a problem with them. Since we skipped test to get them done ASAP(it would take at lest one week more) it looks like one of the components is incorrect. Still didn't find what that components is...
|
|
|
|
|
|
one4many
|
|
April 08, 2014, 08:57:45 AM |
|
Another 2 weeks have passed  ... have you been able to find the cause of the problem of the boards sitting on your desk for a while? Cheers one4many |
|
|
|
|
|
